Error Burning DVD With Windows Explorer: "disc To Fast Or Too Slow"?
Aug 2, 2011
On a 4-year old laptop running Windows 7, I've been burning, in Windows Explorer,Verbatim brand DVD-DL discs rated at 8x, on an external USB Panasonic UJ-220 blu-ray burner that can burn DVD-DL at 2.4x, at 2.4x (the only burn speed choice that Windows Explorer offers), with no problem.Now I'm trying to do the same, with the same external USB burner and with discs from the same cake, on a 1-year old desktop, also running Windows 7. Both the laptop and the desktop are running 64-bit Windows 7[CODE]
View 3 Replies
ADVERTISEMENT
Dec 25, 2009
I'm running Windows 7 premium 64bit.
I generally use Ashampoo burning software 7 to burn files to discs etc and it works fine........however it wont burn to RAM discs.
I tried using the Windows built in burning operation to drag and drop 2 gb of files to a DVDRAM disc......it started OK, but after 40 minutes I pressed cancel.
I burned the same files to a normal DVD and it was done in a couple of minutes.
The discs are made by Panasonic and should be just drag and drop.
My DVD drive is an Asus sata drive. I checked on the Asus web site and the last driver build was a few years old, so I didn't try it.
Anyone else having problems with DVDRAM discs? Is there other software I could be using?
View 1 Replies
View Related
Jan 3, 2012
I have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies
View Related
Sep 25, 2012
just need a sanity check since it has been a long time from last effort at making bootable Mac disc using windows.Is PowerISO the only viable package for doing this? I need to burn a threesome of os x 10.3 Panther for an upgrade to an oldie
View 2 Replies
View Related
Jul 30, 2011
How do I do this? I'm curious so that I can buy and download windows 7 to run bootcamp instead of having to go to the store.
View 9 Replies
View Related
Mar 19, 2012
My desk top used to be what I considered very fast and now same computer alot slower.If it is comming out of an idle mode it will take at least 3 minutes to load a web page. The hard drive is working very hard, it is always running and the light blinking sometimes when not even being used.After being used for 5 min. or so the web pages do load faster but not as fast as they should.Sometimes I get a I.E. not responding message. It's almost like the hard drive is checking something or doing some other work at the same time.I have to the best of my ability cleared out old files and cleaned up what I can. The hard drive is maybe 25% full.
Specs: Dell studio XPS
Intell 2.67 GHZ
Ram 3. GB
64 Bit
I am running Kaspersky anti viris and have run the scan more than once, it says no problems.
View 5 Replies
View Related
Oct 31, 2010
how to use the disc burning programows 7 home premium. I'm trying to learn how to use the disc burning program that comes with the system. I had some pics in the pic library and burned them onto a CD-R. First I tried dragging them into the blank space. That didn't seem to work. Then I simply selected pictures to burn and that worked.However, afterwards I had a problem. I took out some old discs of pictures I had burned previously using another computer (using Roxio Easy CD Creator). When I put these discs onto the DVD drive, suddenly I found that the pics that were supposed to be on the disc had disappeared, and that the new pics (which I had just burned previously onto the blank disc) were now on this old disc. I tried putting in a few more old discs and the same thing happened. The data that was supposed to be on the disc had disappeared and had been overwritten with new data that I had previously burned.
I noticed that I had a message whenever I turned on my computer, "You have images ready to burn." Apparently, the images I burned previously were still set up in the cue to burn again whenever I put a CD into the drive. And these CDs were CD-Rs, which aren't supposed to be able to be rewritten.
View 8 Replies
View Related
Feb 20, 2012
I purchased a itunes hd video and downloaded to my pc. Is there a way to burn this to my blu ray burner
View 1 Replies
View Related
Oct 5, 2012
Why do i get disc feeze after burning in pnnacle 14
View 1 Replies
View Related
Nov 2, 2011
Sometimes when I burn a folder of pics to a disc a message pops up asking if want to burn the pic with out properties, so i press cancel and it proceeds with the burn. then when i view the pics on a diff computer not all pics are visible. so my question is, is there a was to restore all the pics properties before I burn them. and why is is this happening.
View 1 Replies
View Related
Aug 4, 2010
At this moment I'm burning a data dvd using Windows Explorer. It formatted the empty dvd and I had to drag my files (more than 4 gB) to the empty dvd folder. Then it started copying the files (burning them). But it's extremely slow? It is transferring the files at a speed of about 594 kB per seconds and burning the disc this way will take about more than 2 hours?Don't know if it matters but I was using the Live File System.
View 5 Replies
View Related
Oct 7, 2012
My cd/dvd writer just seemed to stop working. I can burn photos or music onto a disc but when I try to look at it it just says disc is blank.
View 1 Replies
View Related
Jun 16, 2011
Have 4 HDDs mounted in case. 3 of them are fine. The WDC W20EADS tests at an average write speed of 1MB/s, read is 80MB/s. Every now and then it comes right and the write speed is also around 80MB/s.
View 5 Replies
View Related
Jan 8, 2010
When attempting to write to any USB drive I have connected (including a 1GB USB key and a 1TB Eagle Consus S-ATA Raid0) I initially see the transfer going very quickly as Windows 7 caches the transfer. The speed initially goes to 60MB/s and then the bar stops moving. If I wait, the transfer never completes with a 1GB test file.
I cannot cancel the transfer, since it says Cancelling but never completes. Only a reboot or disconnecting my drive stops the transfer process. While attempting to transfer, any attempt to read from the drive stalls as well.
Read speed is normal. I can access files on the drive, and copy from the USB -> Windows 7 at full speed.
Here are the things I have done to fix the problem:
1) Set the drive to Performance Mode to enable write caching.
2) Uninstalled and re-installed the USB Root Controller and Intel USB Controller devices.
3) Upgraded to the latest Intel Device Drivers.
4) Ensured that my USB ports are 2.0, and that I am connected to the rear powered USB outlets.
5) Installed the Windows 7 hotfix intended for NVIDIA chipsets with 4GB RAM (does not apply to me, but tried anyways).
6) Tried formatting in 16K block sizes instead of 4K or 8K.
When I connect either USB device to my Macbook Pro, with NTFS drivers installed, my read and write speed are normal. For that reason, I know that the problem is not with my USB drives.
Tonite I will try an Ubuntu live CD to see if I can get full speed write with the exact same hardware that Windows 7 is using, to rule out that this is somehow a hardware issue.
View 4 Replies
View Related
Jun 16, 2012
So today my friend and I, who live in the same country, was downloading this file.It was around 6GB, which is irrelevant, but yea. It was from the same site, we have the same internet, yet he was downloading with 2.6MB/s while I was downloading with 1.338MB/s and it stayed like that for the remaining 40 minutes. Didn't even move at one point, while his went from 2.1 to 2.6 over 10 minutes. Worth noting, we use the same ISP, he only have 25/2 while I have 50/5, and I could easily download 2 files with the exact same speed (1.338MB/s each but not 1 with 2.6MB/s or more.There's also a client downloader, for this game, where he again got 2.6+ whereas mine always stayed at an amazing 80-180kb/s. I tried disabling anti virus, firewall, Malwarebytes, nothing changed it. I know you're thinking it's just the seeds or site that is limited to an x number of download speed, but it really can't be the case in this. It happens with every site I try. It's always at 1.3xMB/s and never moves regardless of how good it is.
I honestly don't remember, but I don't think this happens when it's a .torrent file, using programs like uTorrent with good p2p. It happens in all browsers, and apparently game client downloaders.I can download 5 different downloads at 1.3xMB/s using all of my available internet, but when it comes to a single file, it for some reason, is impossibleI'm not complaining about the download speed, but it just seems like there's something wrong. My downloads also have a habit of failing in chrome after a few minutes, for no reason. That only happens from some sources though.
View 9 Replies
View Related
Jan 2, 2013
i am using bsnl broadband the internet speed is fast about 200kbps wen i downloading in torrent its make very very slow..pc os is windows 7?
View 21 Replies
View Related
Jun 9, 2012
After installing Windows 7 Pro and populating my HD with the normal games and programs I usually run I decided to test my connection speed on speedtest.net I was shocked to see a barley got even 4Mbps/down and .67 up.My Connecton is usually 23Mbps down and change (I pay for 24) and 4 Mbps up. So I ran the speed test with my laptop, sure enough it was running at normal speed but my new build is not.I tried internet connection optimize in System Mechanic, and that did not have any affect on performance.
View 9 Replies
View Related
Nov 16, 2011
I bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH
Nome applicazione:STService.exe
Versione applicazione:1.0.0.64
Timestamp applicazione:4ae02c43
[code]....
View 3 Replies
View Related
Jun 22, 2011
For the past few days, if not a week now, I've noticed that when I switch to Basic theme for RAM intesive programs like Adobe After Effects, Windows is quite slow, almost running as though my laptop is 1GB not 2GB RAM.Though when I switch to Aero theme, Windows is only slightly slower with Adobe After Effects running. My laptop is Compaq Presario CQ56, 2GB shared graphics and I can't explain why the Basic theme is running slow whereas Aero is responding faster, so much so, programs tend to stop responding more frequently on Basic. I have run MSE, MBAM and SAS (MSE realtime, others are standalone mode) and found no viruses and I update them all either daily or every two days. I only have Realtek Audio and MSE on Startup so I can't figure out why this happening!
View 2 Replies
View Related
May 5, 2012
i recently installed convertxtodvd, after installation, i try to burn a movie file to a dvd disc. and after burning is finished, my windows error (blue screen appear amd it says there's some errors) and it restart by itself.after that i try to reinstall that software and the same problem occur.
View 1 Replies
View Related
Sep 17, 2012
I dont really trust what they say because when I checked the review.. its not that good.. so finally i plan to ask from this forum instead, hoping to get answers..What are the best VCD burning program you guys ever used? I want the one that can accept all types of video and convert it on its own and burn it... Easy to use is a must...I have tried the latest Nero but its not good at converting Mp4 files... because when i burned them... the video moves so fast as if they are fast forwarded but the voice lagg behind... there goes my CD wasted...And i have tried Ashampoo as well but they did not recognize mp4 files, only mpeg... i have video converter but what i want is one program to do it all.. drag the video to the program and all i have to do is wait til its done..hoping to get your replies soon.. any software will do... i prefer the simplest and easy to use.. it can be free or paid.. but if paid make sure its worth it
View 1 Replies
View Related
Feb 7, 2013
I have a computer which is pretty old except for the video card which is 2 years old and the psu which is literally 1 month old.Today morning my girlfriend turned the computer on and it started displaying striped flashing multi-colored lights. I turned it off immediately. When I turned it on after 3 hours, It went to start up repair then it displayed a Fatal Error BSOD. Then it proceeded to switch to flashing multi-colored lights which resulted in burning smell from the computer.
View 11 Replies
View Related
Apr 8, 2009
I can't believe this, after the long wait and download, I now get a damn error when trying to burn with PowerIso. Why? Can someone maybe help me?
View 9 Replies
View Related
Feb 11, 2013
I will try to be as descriptive as possible. I currently have GoWifi to access my internet (my room mate has it to)But for the past 4 days my computer has been running horribly slow. I can't use a enthernet cable becuase "Gowifi" is only wireless. I use google chrome most of the time, but the internet is slow on chrome and explorer. I have tried the "ipconfig /release then ipconfig /renew" method. I have also tried to Reset WINSOCK, Reset IPv4, Reset IPv6, and then restarted my computer but still did not do the trick. I have tried various things from forums on other sites and this site but it still is not doing the trick.Is there Anything you guys could tell me that could fix my problem? And i do have a windows 7 computer.
View 1 Replies
View Related
Nov 14, 2012
OS: Windows 7 Ultimate x64
CPU: AMD Athlon 7750 x2
RAM: 4GB
GPU: Nvidia GeForce 9500gt
HDD: Seagate 1TB
I am not sure if the problem with my DVD burner is a software related one or a hardware related one. I am using HL-DT-ST DVDRAM GH22NS70 SCSI CdROM device. Of late, most of the times when I am trying to burn a disc, it shows Program Memory Area Update Failure. The errors are random. At times I can burn 2-3 discs before the error pops up. At times it happens during burning the first disc. The type of files I am burning also has no effect as the error occurred as I attempted to write various types of disc.I sed ImgBurn and Nero but the problem persisted.
View 5 Replies
View Related
Dec 23, 2012
I'm trying to copy an audiobook cd to a blank cd. It ripped to windows media player, but when I tried to burn it to a cd-rw disk I got the message "Windows Media Player could not complete burning because the disc is not compatible with your drive. Try inserting a different kind of recordable media or use a disc that supports a write speed that is compatible with your drive." Is there a different type of disk I should be using?
View 1 Replies
View Related
Jan 7, 2010
why after i install a clean copy of windows 7 in my laptop Packard bell easynote nj65 my cd/dvd-rom is too slow to load, when i insert a disk in a optical drives my laptop is too slow to load a file,movie, software anykind of a file in disk before appear on screen there is some solution to make speed up my cd/dvd-rom?
View 2 Replies
View Related
May 6, 2011
I installed SP1 and everything was just fine (for months).Then I used "Disk Cleanup" to remove the SP1 installation files and other temporary files.After a few restarts,I got some USB problems.Peripherals started to work at USB 1 speed. Here's how the USB section of the Device Manager looks:
I restored the system partition a few times and I can say pretty confidently that using Disk Cleanup is the cause. Although I'm not sure if the problem is caused by removing SP1 files or some other temporary files.Motherboard is an Asrock ALiveNF6G-VSTA. I'm also using a USB hub, but the problem (slower speed) happens on _all_ USB ports, both on the hub and directly on the motheboard.Windows 7 64 bit, everything updated.
View 1 Replies
View Related
Dec 30, 2011
I have a very fast system with 16Gb Ram and SSD drives. However when I open a folder containing images, explorer takes ages creating the thumbnails. (Whether small/medium or large icons is selected). OK the first time, but why every subsequent time I open that folder?
If I scroll down, the thumbnails are only created when the next lot of files come into the window. If I am in Details mode, then some columns i.e. Date, take much longer to populate than others. It's as if my windows isn't caching or something?
View 3 Replies
View Related
Feb 1, 2011
Windows Explorer on my wife's computer (running W7 Home Premium and completely up to date with Windows Updates) takes 4 or 5 minutes to finish running right after a power-up boot. The hourglass icon seems to sit there forever, but the folders and files finally appear. Later, when running an Explorer-type function, such as saving a file in Word or opening a file in some other application, a long delay occurs again. Her computer hardware and software components are very similar to mine, and I never have this problem. She may have a few hundred more photo files than I have, but I can't identify any significant difference. During these long delays I've watched the Task Manager
View 1 Replies
View Related
May 6, 2011
Windows Explorer on my wife's computer (running W7 Home Premium and completely up to date with Windows Updates) takes 4 or 5 minutes to finish running right after a power-up boot. The hourglass icon seems to sit there forever, but the folders and files finally appear. Later, when running an Explorer-type function, such as saving a file in Word or opening a file in some other application, a long delay occurs again. Her computer hardware and software components are very similar to mine, and I never have this problem. She may have a few hundred more photo files than I have, but I can't identify any significant difference. During these long delays I've watched the Task Manager, and no appreciable amount of processor time is being used.
View 2 Replies
View Related
