Burning ITunes HD Video To Blu-ray Disc?
Feb 20, 2012I purchased a itunes hd video and downloaded to my pc. Is there a way to burn this to my blu ray burner
View 1 RepliesI purchased a itunes hd video and downloaded to my pc. Is there a way to burn this to my blu ray burner
View 1 RepliesI have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies View RelatedI-Tunes freezing when burning a CD. We are using Windows 7. It starts then freezes and must force a re-start.
View 1 Replies View Relatedhow to use the disc burning programows 7 home premium. I'm trying to learn how to use the disc burning program that comes with the system. I had some pics in the pic library and burned them onto a CD-R. First I tried dragging them into the blank space. That didn't seem to work. Then I simply selected pictures to burn and that worked.However, afterwards I had a problem. I took out some old discs of pictures I had burned previously using another computer (using Roxio Easy CD Creator). When I put these discs onto the DVD drive, suddenly I found that the pics that were supposed to be on the disc had disappeared, and that the new pics (which I had just burned previously onto the blank disc) were now on this old disc. I tried putting in a few more old discs and the same thing happened. The data that was supposed to be on the disc had disappeared and had been overwritten with new data that I had previously burned.
I noticed that I had a message whenever I turned on my computer, "You have images ready to burn." Apparently, the images I burned previously were still set up in the cue to burn again whenever I put a CD into the drive. And these CDs were CD-Rs, which aren't supposed to be able to be rewritten.
I'm running Windows 7 premium 64bit.
I generally use Ashampoo burning software 7 to burn files to discs etc and it works fine........however it wont burn to RAM discs.
I tried using the Windows built in burning operation to drag and drop 2 gb of files to a DVDRAM disc......it started OK, but after 40 minutes I pressed cancel.
I burned the same files to a normal DVD and it was done in a couple of minutes.
The discs are made by Panasonic and should be just drag and drop.
My DVD drive is an Asus sata drive. I checked on the Asus web site and the last driver build was a few years old, so I didn't try it.
Anyone else having problems with DVDRAM discs? Is there other software I could be using?
just need a sanity check since it has been a long time from last effort at making bootable Mac disc using windows.Is PowerISO the only viable package for doing this? I need to burn a threesome of os x 10.3 Panther for an upgrade to an oldie
View 2 Replies View RelatedWhy do i get disc feeze after burning in pnnacle 14
View 1 Replies View RelatedHow do I do this? I'm curious so that I can buy and download windows 7 to run bootcamp instead of having to go to the store.
View 9 Replies View RelatedSometimes when I burn a folder of pics to a disc a message pops up asking if want to burn the pic with out properties, so i press cancel and it proceeds with the burn. then when i view the pics on a diff computer not all pics are visible. so my question is, is there a was to restore all the pics properties before I burn them. and why is is this happening.
View 1 Replies View RelatedMy cd/dvd writer just seemed to stop working. I can burn photos or music onto a disc but when I try to look at it it just says disc is blank.
View 1 Replies View RelatedI have a 720p resolution video file in HD specs. I converted it from mkv --> avi with a special program to keep its subtitles and HD specs. However, I want to burn it onto a DVD WITH a DVD menu. The only problem is that everytime I want to do so, the programs that I tried forces me to dumb down the quality to 480p. Is there a simple solution that is not too complicated for me to keep the HD resolution? By DVD , I mean like burn as DVD so I can watch it on a DVD player that is for TVs.
View 1 Replies View RelatedOn a 4-year old laptop running Windows 7, I've been burning, in Windows Explorer,Verbatim brand DVD-DL discs rated at 8x, on an external USB Panasonic UJ-220 blu-ray burner that can burn DVD-DL at 2.4x, at 2.4x (the only burn speed choice that Windows Explorer offers), with no problem.Now I'm trying to do the same, with the same external USB burner and with discs from the same cake, on a 1-year old desktop, also running Windows 7. Both the laptop and the desktop are running 64-bit Windows 7[CODE]
View 3 Replies View RelatedI bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH
Nome applicazione:STService.exe
Versione applicazione:1.0.0.64
Timestamp applicazione:4ae02c43
[code]....
looking for alternative for itunes for a while.I have an ipod touch 8gb.Now been looking at this piece of software and wondering will it recognise my ipod touch or will I have to stick to itunes,I have music photos & video clips on it now. This is what I've been looking at but will it recognise the ipotouch?? Link..... Free iTunes alternative - Manage iPod iPhone without iTunes
View 3 Replies View RelatedI have an old Xbox 360 HD DVD drive and a few HD DVD movies. Is it possible to convert them to Blu-ray Discs/video files?
View 3 Replies View RelatedI've got one I can't figure out. I'm trying to load Windows 7 home Premium. I have the family pack which comes with both a 32 and a 64 bit disk. When I try to load ether disk on to a Gateway GT5238e, I see no video, just a blank black screen that slowly goes white from the edges. This happens on two 5238e PCs. The disks do load on an Acer laptop. Both 5238 PCs are running XP fine and I have had no cd/dvd issues with the drive. I should mention that when I try to run the disk from XP I get a message thatI can not upgrade to 7 from XP and must do a clean install, that is why I am trying to boot from the CD.
View 1 Replies View RelatedI'm trying to downgrade from iTunes 10.5 to a version that doesn't crash (see my previous thread). However, whenever I do this, I cannot import my Library file (.itl) because it was created by a newer version of iTunes.
View 1 Replies View RelatedI use iTunes on my Windows 7 computer to sync with my iPhone, and the last time I went to open iTunes it gave me the error message "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."I had heard that if I uninstalled Quicktime (which is bundled with iTunes when that is downloaded), then reinstalled it separately, it would work again, but after trying that it didn't. So I decided to just uninstall iTunes, then reinstall it. However, every time I try to uninstall it in Add/Remove Programs, it just sits there saying it'll be about eight more seconds to go to finish deleting, but it just sits, and sits, and sits...... Nothing. I also tried to just install the newest iTunes on top of the existing one, but every time I try it tells me that it's already installed and to click "Ok." So I can't uninstall it, nor can I install it, nor will iTunes open on its own. I had done a system restore recently, so I don't know if that had anything to do with it.
View 2 Replies View RelatedI wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedSo I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedIs there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
View 6 Replies View RelatedAt this moment I'm burning a data dvd using Windows Explorer. It formatted the empty dvd and I had to drag my files (more than 4 gB) to the empty dvd folder. Then it started copying the files (burning them). But it's extremely slow? It is transferring the files at a speed of about 594 kB per seconds and burning the disc this way will take about more than 2 hours?Don't know if it matters but I was using the Live File System.
View 5 Replies View RelatedWhen I'm adding files to burn to a CD, how do I tell when the CD is full and won't hold any more? My program on my old computer had a little line at the bottom, and each time I added one it would fill up more and more till the tip of it started to turn yellow if I had too much on.
View 5 Replies View RelatedI am having an issue that seems to be related to Windows 7.
Whenever I try to burn any kind of DVD, using any program, Nero, Cyberlink Power2Go, even windows own built in burning software, every disk fails to burn.
When I boot into my Windows XP Partition on the same computer, using the same DVD drive, discs burn fine.
Having the same problem with my Windows 7 Laptop - - The main PC is running build 7068 x64 and the Laptop is running the x86 version of 7068
Any ideas folks?
at the minute i have 'imgburn' and windows DVD maker however imgburn does not add chapters to the DVDs i am making where as windows DVD maker does! downside is that windows DVD maker takes around 1 hour 40 to complete a sucessful burn!is there any other programs that can add chapters automatically but not take all day to make a few DVD.
View 1 Replies View RelatedI have Convertx2DVD and DVDFab installed on my Win 7 Pro 64 bit and both hang at the point after conversion and beginning burn.
what I need to disable in regards to Win 7 to be able to get them to work? Other people seem able to get them to work but I don't know what they did to enable the programs to work.
I use WMP to burn an audio CD, which is 700M. Each song is 23.5M. I drag about 20 songs to the burn list under WMP. It seems each song is in one track. But, when i hit start burn button, there is ONLY song being burned. Why? Why I cannot burn all 20 songs in the one CD?
View 8 Replies View RelatedJust got a new machine with Windows 7, burned 2 dvd's from avi files and they worked fine, now when i use Windows to burn a dvd from an avi (even tried one of the ones that had worked previously), I get no audio on the DVD, and it doesn't matter if I watch it on the computer or in a DVD player. The avi plays fine on the PC ..
View 9 Replies View RelatedI have Windows 7 ultimate version 6.1 and I need a driver 64-Bit CD burning. What i can do?
View 1 Replies View Relatedit doesn't matter if I use a third party program or the W/7 burn image feature to burn an iso, I end up with a dvd that has written data that can't be seen in explorer. All I can see in explorer is "files ready to be written to the disc > desktop."
The desktop file is [.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%system32shell32.dll,-21815
If I try to burn that file it says "no files [staged] to burn"
I've tried different dvd's including Vertbatim, but all have been +RW.
Verify disk confirms the data is burnt and closing the disk does not make any difference....the files can't been seen.
Optical drive = LG H20L (with latest firmware)
Edit....the files I'm burning should be visible, but in any case I've got "shown hidden files, folder & drives" selected in folder options.
I am seeking advice on ISO burning software....I have had only one experience with creating an ISO file and that was long ago. I want to use it to burn audio CDs and Windows 7 64-bit SP1. I downloaded ImgBurn because it is compatible with all Windows 7 versions, but before installing I would like to know if I made the right decision.
View 16 Replies View Related