Whenever I install anything or uninstall anything I get "format drive(s)" on my screen and my slave drives become inaccessible. Both slaves are un-damaged, I am virus free as well as spyware or malware free as numerous scans from Malbytes, Spybot and AVG all show nothing. I restart my PC, the drives are back, fully functional and no other issue(s) arise til I un-install or install something. Throughout the whole process, my main drive is never affected in anyway, not even in the least. I myself am stumped as I've checked the cables (sata) the slots for dust or inconsistency, ie : power or other issue with slot or cord. Drives were tested and spun at optimum level with no corruption.
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
i want to boot windows7 from my harddisk which i am using .
i mean to say that not from external hard disk drive.
i will try to explain again, actually i have a pc on which i am working at this time (internal or primary harddisk drive of it ). i want to reboot my system and when its bootsup then it should be stating setup of Windows 7 from one of my harddisk drive. for example from d: drive (D:/Windows 7)
I bought two new Western Digital AV-GP WD3200AUDX drives. They're advanced format drives designed for audio-video editing folks, but essentially they're just a bit better than any standard SATA drive (per reviews I've read).
My Config: Windows 7 Home Premium 64 Asus P6T Deluxe V2 2x WD AV-GP drives (320GB each, RAID0)
I would install them into a RAID0 (striping) configuration and then install Win7 Home Premium 64. The problem is that if I enable RAID in the BIOS, windows WILL NOT recognize these drives and thus I can't install to them. I saw that there's a problem with earlier versions of Intel RST and that you can either download new drivers or upgrade to Win7 SP1 which includes the fix.[URL]
Problem: I can't install, so I can't use the new drivers. The driver disk they have available for installation is (a) meant for XP and such, not Win7... and (b) doesn't work anyhow.Another Problem: I installed Win7 to a separate drive in IDE mode and upgraded to SP1, but now Windows has a boot loop and windows startup repair is telling me SP1 is the issue. The theory here was that I would get SP1 up and running with the drivers, then tell Windows to do an upgrade/clean install over to the new RAID drive (which it would hopefully recognize now) and download updates prior to the installation, thus enabling it to work during install.The only thing I can try doing (that I haven't yet) is updating the BIOS, but none of the newer updates mention anything about drives or storage compability, so I don't think it'll have any effect.
I was running Windows 7 and I decided to test out Linux Ubuntu so that I would know what I was talking about with the OS. The disc run was pretty bare bones so I decided to install it onto my system. Bad news is that it completely messed up Win7 somehow and I was pretty much forced to do a re-install of my Win7 installation. When I went to re-install to fix the lag errors, it says I can't install on any of my hard drives because they have been all changed to ext3 format by Linux. I have no idea how to change them back to NTFS format for Windows. is it possible to format my hard drives back to NTFS using the command prompt that is in the Win7 install disc?
I have a new Dell with windows 7 and I have three external hard drives which I use on three other machines with xp pro one them. This machine will not open these drives and demands a format. They work perfect on my other machines
When I try to access drive D it says this "you need to format the disk in drive d before you can use it". I don't even know whats in Drive D, my computer is new. But when I right click properties for used space it says 0 bytes and free space 0 bytes. But it still says its full. [URL]. After I press cancel [URL]. Drive Space [URL]. What should I do?
Every 5 minutes or so , a pop up saying "You need to format the disk in drive g before you can use it" comes up. Problem is, I have no disk in drive g, and nothing connected to my usb ports. So i have no idea what this means. Add to this that the device manager keeps refreshing and will not let me click anything.
I am using win 7 ( Home premium ).My ram is 2GB .I use my PC alot with some heavy programs .So my system is slow down. I want to use Win XP .But Win 7 cant install win XP .I have read some internet page.They said I must format my system disk to install win XP .I dont know how to format this.
I am getting this popup: "You need to format the disk in drive x before you can use it". In my case it's drive H:. I have unchecked "Use AutoPlay for all media and devices" in the Control Panel. I did this a week ago when I started getting these popups and it seemed to work till today when it all started up again. I just noticed that the popup is not appearing, but the drive is appearing and disappearing from my file manager (I use Q-dir).
I just bought an Samsung G2 External HDD month ago. It worked well since the date I bought it. But yesterday, when I'm trying to plug in my external, windows give me some error message :
"You need to format the disk in drive G: before you can use it"
I dont want to format my external, because I had many important files in my external. If I had to format, how can I recover my files in the external ?
This weekend a installed the windows 7 64bit over a vista 32bit. During the installation I left my Samsung S2 HD 500gb plugged in.After the installation the windows didn't find a mass storage controller drive and my HD appeared as Local Drive ( F: ). When I try to access it, this msg comes up: you need to format the disk in drive f before you can use it. I tried plugging in all usb port I could find. And even the win xp 32bit showed the same msg. I also tried the "Easy Recovery Pro". But it didn't worked. When a click on any of the recovery option the software doesnot find any hard drive in my pc. Then I tried the "GetDataBack for NTFS". After 24 hours of scanning, it didn't find any of my files. Tonight, I will try the "diskdigger" and the "Recuva". But I am not putting too much faith on those software due some post I read here. I really need to recover same work data.
SO, problem is: I got this USB, it worked very well 'til some days ago. I can't format it, no matter what I try, e.g. formatting it using different formats, formatting it using Computer Management, formatting it in safe mode. None of these things seem to work for me, and I have no idea why. There's also something else to it: before it became unusable and not format-able, it was somewhere around 4GB, and now, when I want to format it, it gives only the option to format it using the capacity of 12.5MB, which doesn't work anyway. I've tried looking at unpartioned spaces in it, but there aren't any, so I completely have no idea how to go through this problem.
have used ATI for a long time with no problems on various machines, including my Windows 7 Ultimate, x86 computer. this machine has a WD black caviar sata lll 500gig hdd, but is connected on sata ll (mobo doesn't support sata lll). have just got a new machine which is running windows 7 ultimate x64. it has the same hdd as the machine mentioned above, but is connected as sata lll on the mobo. ATI told me that it couldn't find any disk drives, so i couldn't back up the hdd. i discovered that WD put out their own version of ATI, so i downloaded it, installed it and made a recovery cd. this gives me the same error that it cant find any disk drives so i still cant back up the hdd. didn't see why but thought it may be the o/c settings, i reverted back to stock but no difference. windows backup works, but produces a hell of a big file compared to ATI.
I have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
i am trying to extract this zip file but i get the following, "Permission denied. The administrator rights are required to run this tool" I can open up grub4dos zip file but not the usb disk storage format program..
I have got a laptop with win 7 on it. There is only one drive in laptop which is C: , I want to wipe the hard disk and install win xp professional on it.1- How can i format the hard disk which has win 7 on it?2- After formating the hard disk, would i able to install the window 7 through recovery disk which i have already made incase anything goes wrong?
I have "Jetflash Transend 8GB" flash drive. I can't format it. When i try to delete or format it this error appears "The disk is write protected" so how do i format it
I am trying to format a 320 GB disk drive as single storage that was once used on a motherboard as a Raid 0 array. I can format the disk drive as NTFS via a USB cable, but when I try and connect the drive internally on the motherboard, the computer does not see it. When I go to disk managment to try and initialize hhe drive, it list the drive as a array and gives me an error. I have tried this a couple times and am at a loss as to hoe to get rid of the "Array" name disk managment says it is.
I have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
Recently, I'm unaware of what happened to my Hard disc, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
Am unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
I have switched CPUs in order to upgrade my system, but I have copied over all the important files from my old computer. The current CPU was used by my dad before me and worked perfectly. It runs on Windows 7. However, since unplugging the tower and moving it back to my room, it no longer recognizes any of my CD/DVD drives. They are both functioning, turning on and opening and closing, but they are not listed under COMPUTER. I have tried several fixes on this site including merging my registry with a file on Notepad and running a program called cdgone but it still doesn't work. When my computer boots up I go to a screen with F2 that allows me to view my system. The drivers are listed as off but when I switch them over the computer will not let me. [code]
i recently bought a new hard drive to put my os on, and i stupidly changed my old hard drive type from basic to dymainic, and its not letting me reformat it or convert it back to basic. When i try it says "Windows cannot format the system volume on this disk."
