Running Bat File To Get All IPs And Mac Addresses On Network?
Jul 2, 2011
I am trying to run a batch file (arpping.bat) that will get all of the IP's and mac addresses on the network. Here is the batch file:
REM arpping.bat
ping -n 1 -l 1 %1.%2
arp -a %1.%2
I run the following command from the command line:
C:\> for /l %i in (1,1,254) do arpping 160.82.220 %i
I the receive the following, repeating, output line at the command line: "The process cannot access the file because it is being used by another process." This keeps repeating until I hit Ctrl C. Not sure where the problem is.
View 3 Replies
ADVERTISEMENT
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Nov 28, 2012
It used to happen that when I wanted to send an email all I had to do was type in the first letter of the email address in the 'TO' box and a list would come up with all emails that started with that letter. So i could just click the one I wanted and it would autimatically fill the box of with the email address that I wanted to send. Now suddenly it doesn't do that anymore.
View 2 Replies
View Related
Jan 18, 2012
I want to disable some of the USB ports in my W7U-64bit Ultimate system.Normally I do this by viewing in HWINFO64.The after in DeviceManager to uninstall the wanted USB ports.But now I cannot see the adresses in HWINFO64 nor in DM.
View 5 Replies
View Related
Mar 1, 2011
I would like to block a certain IP address from having any connection to my network, and I don't recall how IPSec works, or if it even works in Windows 7. In class, we learned it on XP. how to prevent this IP from contacting me ever again?
View 1 Replies
View Related
Feb 13, 2012
I have written a batch file to run every afternoon, using Task Manager.When I was running WIndows XP, the Task Manager (or it may have been the batch file itself) opened a new DOS window whilst it was running so that I could see everything was working correctly. Under Windows 7, the same batch file will only run in a new window if I run it myself - if it runs in Task Manager it will only run in the background. How can I get it to oipen a DOS window whilst running through Task Manager, please?
View 3 Replies
View Related
Mar 24, 2011
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
View 5 Replies
View Related
Nov 12, 2009
I've been turning off un-needed services in my configuration to speed up my system for gaming. Which servises are nesserary to for home networking to work properly. My network discovery button wont stay checked. I solved this before but forgot which had to keep running.
View 1 Replies
View Related
Jun 30, 2012
How do I copy my E Mail addresses in OE in XP to a flash drive and put them into Win 7 Live Mail?
View 3 Replies
View Related
Apr 26, 2012
If I place a single 4GB stick in my machine and run memtest, I see it's testing only 3.7GB. I assume this is the PCI memory map taking 0.3GB. Does this mean I'm not actually testing all the memory or am I missing something?
View 2 Replies
View Related
Jul 24, 2012
How would I go about assigning different ip addresses (static) to different programs? Ill give you an example of what I mean. There is a Popular game called Minecraft (I don't know if you have heard it before, but It might help if you do know about this game) but I am planing on hosting multiple minecraft servers on one server (machine). So how do I get more static ip addresses (on one machine) so I can host more than one server on one machine?
since minecraft uses the port : 25565 would I be able to host a website on the same static ip address as a minecraft server since websites use different ports?
View 6 Replies
View Related
Feb 19, 2013
how do I remove addresss from the address bar in windows 7 and Mozilla Firefox?
View 2 Replies
View Related
Feb 20, 2012
Is it possible to extract a file, folder from a backup running Win 7? My friends computer crashed he I tried to use the backup image without any luck, so I reformatted losing personal info pics, music and docs. I'd like to restore mentioned files if possible.
View 1 Replies
View Related
Mar 29, 2012
I used this weblog post (GHOST PXE Boot Via TFTP - Tygarbyte) to boot computer from network and run ghost on a network location. now when I try to boot several computers from the network and run ghost at the same time it gives me this error: error 52: A duplicate workgroup or computer name exists on the network.
I want to boot several computers and run ghost from a network location
View 1 Replies
View Related
Jan 17, 2013
I m running Windows 7 ultimate x64 on 6 pcs. All connected with cat6 cable to Gigabit Ethernet 8 port switch. Most of the PC have Realtek 8111F, 1 x Gigabit LAN Controller on board (1 or 2 have intel pro giga)
Now question is what settings should i make so that my all pcs can use full available bandwidth/data speed ?
(lan card properties have many settings in advanced tab such as ..packet size,link speed,buffer etc.)
View 5 Replies
View Related
Jul 16, 2011
My laptop windows 7 will not remember E Mail Addresses. I need to type in my address everytime I want to check my E Mails.
View 1 Replies
View Related
Dec 7, 2011
My previous laptop ran XP. I backed up my outlook .pst file to an external hard drive. My new laptop runs Win7. After installing Outlook I imported the .pst file. At first everything seemed perfect but then I started realizing that the master category list is not there. Also, the address book had none of my addresses associated with the entries. Only new ones appeared and then not in their proper categories. What can I do to remedy this situation? I feel the categories and addresses must be somewhere in my computer because when I open a contact, I can click on the email icon and send mail.
View 2 Replies
View Related
Feb 12, 2010
Is there an option to export the address book and messages from Thunderbird ? I just cannot seem to find the export option.
Also, if I do manage to export the messages from a 32bit version of Thunderbird, will a 64bit version of Thunderbird be able to import them ?
I am trying to piggy back my address book and messages from Outlook Express on my old WinXP PC to Thunderbird 64bit on my new Windows7 PC. I have imported the address book and messages from Outlook Express on my old PC into a 32 bit version of Thunderbird on the old PC but cannot get any further.
View 4 Replies
View Related
Dec 10, 2010
A certain set of programs take over a minute to run. If I double click the executable it takes over a minute before the program launches.Equally attempting to access the file properties takes a similar amount of time.(the file happens to be audioconverter.exe (part of a set of programs to re-encode mkv's - e.g. strip out of the dts track and reencode with ac3, etc.)Only files in this set of sub-directories seem to be affected, the rest of the machine performs perfectly
View 2 Replies
View Related
Aug 10, 2011
I'm using Windows 7 Home Premium 64-bit, and I'm using the program Expressit 3.1 to create my CD labels.I downloaded it from here: exPressit SE - Free software downloads and software reviews - CNET Download.comow, the files it creates, of which I have several made using its previous version, 3.0, are suffixed .exp. I have set my Windows 7 installation so that ExpressIt is the default program to open these files. Double-clicking an .exp file should therefore open that CD label in the ExpressIt program.However, when I double-click an .exp file, the ExpressIt program does not open so that I can work with the file. If I run the ExpressIt program first, then 'Open' the file from within the program, it all works fine.(The problem with this 'workaround' is that when going to Open the file, its default directory is nowhere near the directories containing my .exp files and takes ages to browse to, so I don't want to do it like that).
View 6 Replies
View Related
Oct 24, 2010
I have just moved house and been given the internet details by the landlord. The provider is Virgin and the landlord asked for my MAC addresses of each device to allow access to the internet and gave me the password. I managed to connect on my iPhone and my housemate who is also running windows 7 off a laptop can also connect. However the network does not even appear in my wireless list. Several other wireless networks in the area are being detected but not the one in the house. I know it's not hidden as I can connect on other devices.
I have tried a manual setup with the network name, encryption etc and tick "allow connection even when network is hidden" but all to no avail. Unfortunately I have no access to the router as the landlord has that next door, however seems strange it would be a router issue if the other devices connect fine. I have been through all the settings with my housemate and ensured we have the same setup and am now thoroughly baffled and annoyed.
View 4 Replies
View Related
Oct 19, 2011
I'm setting up home media server. At least trying to...My home network looks like this:2 laptops (ubuntu/windows7) and a home server (ubuntuServer + Samba).I've samba setup in a way to provide password-less access to share folders. I secured it by blocking all IPs but the range I use at home. (I can provide config details upon request).With ubuntu laptop, I can connect to server without any issue. I just go to network tabs and can see windows WORKGROUP share smb share both pointing to same folder. So all works good. I can also mount external drive without issue, or create network drive. Connection never times out and it stays all good.
.Problem#1 Using "map network drive" tool I cannot use hostname (server.local) I've to use IP. This means that every time server box is asigned a new IP by my dumb router I have to delete the drive and run wizard again. This is very annoying. Since IP doesn'ts tay static I cannot use WINS or map IP in hosts file. So I'm open to suggestions from your side.
Problem#2 Windows 7 disconnects network drive every 15 minutes (I think), on SAMBA I configured to stay live all the time. But windows has its own mind so it doesn't keep connection live. This results in, lateness when I try to go to my computer as OS tries to find and add drive on network. Every 2 times in 5 this procedure gives me error, host cannot be reached or something like this. So I've to delete folder and remap drive again, which surprisingly works every time! so annoying! I don't have to do this in ubuntu at all, I don't understand why windows behaves in this way.
Problem#3 Very often I cannot ping linux server from windows using hostname, like this: ping server.local - but I can at the same time ping with IP. And also from ubuntu atm I can ping server.local without any problems.
View 1 Replies
View Related
Jan 12, 2013
In our company, we are using Windows 7 and my goal is to prevent users (also administrators) of specific workstations from running executables which are located on mapped network drives (servers).I tried different things (e.g. Software Restriction Policies or Applocker => in both cases I tried the UNC address as well as the drive letter to set up the rules) but nothing worked.
View 9 Replies
View Related
Oct 13, 2012
I noticed that my WLM categories were somehow corrupted and missing some names. When I click the category on the left, in the list of names on the right they are all there. However when clicking edit I notice some addresses are missing. They are also missing when attempting to send mail. When I add the missing addresses and click save they are not actually saved. I tried deleting the category and making a new one and that seemed to work for a while but the next time I logged onto WLM the same names were missing again.
View 2 Replies
View Related
Dec 2, 2012
I'm trying to print out a christmas card list using mail merge in Word. I've entered the names and addresses and the list is fine but when I try to print the addresses on the envelopes, they don't align properly on the envelopes. I've tried different size envelopes from the list provided by Word but the only two that print properly are the size 6 3/4 and the size 9. Unfortunately, I cannot find christmas cards that size. I also tried the custom option on the envelope list to size an envelope but that doesn't work either.
On the menu, I've tried manually adjusting the position of the address block instead of using the auto choice but that doesn't work either. I use an H P C 4700 series printer and I am inserting the envelope properly (along the left side of the paper feed). I've also downloaded lotus symphony and open office in the hope that the printing would work in their wps but there was a file recognition problem. I have used Word 2002 and the Microsoft Word Starter 2010 and my printer works fine.
View 3 Replies
View Related
Aug 28, 2011
My ISP is Time Warner, and I have been very satisfied with their broadband service in the 7 or so years that I have been with them. Lately, however, I decided to subscribe to their 'Turbo Plus' product, which guarantees 20 Mbps download and 2 Mbps upload speeds, or 20 x 2. I wanted this for a better gaming experience, and the faster downloading of large files, such as video files. With installing the new 20 x 2 service, Time Warner installed a new Motorola Surfboard SBG6580 Wireless N Broadband Modem / Router.However, since the new device was put in, I have been getting 'DNS errors' on my PC and other devices, such as "Error - Server not found in DNS".
I never received these with the previous device or service, so I believe that they are related to the new device's settings. I was advised by a tech person that I know to subscribe to the OpenDNS service, and then 'simply' change the DNS IP addresses in the router. Unfortunately, I cannot find a place to set these in the router. There is, however, a place for Dynamic DNS, which uses [URL] I am able to change the DNS IP addresses in my Windows 7 network and sharing center, but this does not help my iPhone, PSP, or other devices on my network. Also, from the OpenDNS site, I read that it is 'better' to make the change in the whole network (router), rather than on each individual device.
Is it better to have the proper DNS addresses in the hardware versus the software on each device? Is there a way to change the DNS addresses in the Motorola SBG6580 that maybe I am just overlooking? Should I purchase new networking equipment, and if so, what brand do you recommend? [I have been somewhat satisfied with the Cisco Valet line, but they seem to only want to help me with that line, and not with helping me solve the overall (new) problem, which I thought would be an opportunity for them to sell new equipment.They told me that what I could get from them, the WCG-200, was available from Time Warner, and that I could then just 'cascade' my Cisco Valet (wireless N) router from that device.] If it gets me a better result in the end run, then I am willing to purchase new equipment. However, I am also on a 'fixed' income, so I can't afford to make purchases that are not necessary, either.
View 1 Replies
View Related
Nov 29, 2011
Want to send 1-3 hundred e-mail addresses a letter , how do I do it ?
View 5 Replies
View Related
Apr 17, 2012
how do i share a network printer from my Windows 7, 64 pc to one running vista i have tried all the sharing settings, but when i upgraded my PC to win 7, my second pc running vista won't print anymore printer: hp officejet pro 8500ag
View 1 Replies
View Related
Jul 30, 2011
When we receive emails from our server email addresses are in plain text and are not clickable. It is ok from other sources.
View 6 Replies
View Related
Jan 21, 2012
I have bought a new computer with Windows 7 preinstalled. Before setting it up I backed up all my outstanding emails (204 .dbx files) and email addresses (one .wab file size 176kb) from my old computer on to a memory stick. I now want to import them into Windows Live Mail. I have gone through the recommended procedure for the emails, but only some of them have come across. I have been totally unable to import the addresses. The only procedures I have found seem to relate to a different version of Live Mail because they tell me to click on things that don't appear on my screen!It occurs to me that maybe not all the messages are being imported because I haven't imported the relevant contact details. Could this be the case? By the way I can't go back to the old computer as it has completely died, which is why I replaced it.
View 1 Replies
View Related
May 19, 2012
Where are the autocomplete email addresses stored and can they be exported to an Outlook nk2 file?
View 4 Replies
View Related
