Cannot See The Addresses For USB Ports?
Jan 18, 2012
I want to disable some of the USB ports in my W7U-64bit Ultimate system.Normally I do this by viewing in HWINFO64.The after in DeviceManager to uninstall the wanted USB ports.But now I cannot see the adresses in HWINFO64 nor in DM.
View 5 Replies
ADVERTISEMENT
Aug 9, 2011
A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.
The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.
Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.
Other info that may be important:
-No overclocking settings in use.
-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.
I might as well throw the card away if it is only going to act as a USB 2.0 device.
View 4 Replies
View Related
Nov 28, 2012
It used to happen that when I wanted to send an email all I had to do was type in the first letter of the email address in the 'TO' box and a list would come up with all emails that started with that letter. So i could just click the one I wanted and it would autimatically fill the box of with the email address that I wanted to send. Now suddenly it doesn't do that anymore.
View 2 Replies
View Related
Mar 1, 2011
I would like to block a certain IP address from having any connection to my network, and I don't recall how IPSec works, or if it even works in Windows 7. In class, we learned it on XP. how to prevent this IP from contacting me ever again?
View 1 Replies
View Related
Jun 30, 2012
How do I copy my E Mail addresses in OE in XP to a flash drive and put them into Win 7 Live Mail?
View 3 Replies
View Related
Jul 2, 2011
I am trying to run a batch file (arpping.bat) that will get all of the IP's and mac addresses on the network. Here is the batch file:
REM arpping.bat
ping -n 1 -l 1 %1.%2
arp -a %1.%2
I run the following command from the command line:
C:\> for /l %i in (1,1,254) do arpping 160.82.220 %i
I the receive the following, repeating, output line at the command line: "The process cannot access the file because it is being used by another process." This keeps repeating until I hit Ctrl C. Not sure where the problem is.
View 3 Replies
View Related
Apr 26, 2012
If I place a single 4GB stick in my machine and run memtest, I see it's testing only 3.7GB. I assume this is the PCI memory map taking 0.3GB. Does this mean I'm not actually testing all the memory or am I missing something?
View 2 Replies
View Related
Jul 24, 2012
How would I go about assigning different ip addresses (static) to different programs? Ill give you an example of what I mean. There is a Popular game called Minecraft (I don't know if you have heard it before, but It might help if you do know about this game) but I am planing on hosting multiple minecraft servers on one server (machine). So how do I get more static ip addresses (on one machine) so I can host more than one server on one machine?
since minecraft uses the port : 25565 would I be able to host a website on the same static ip address as a minecraft server since websites use different ports?
View 6 Replies
View Related
Feb 19, 2013
how do I remove addresss from the address bar in windows 7 and Mozilla Firefox?
View 2 Replies
View Related
Jul 16, 2011
My laptop windows 7 will not remember E Mail Addresses. I need to type in my address everytime I want to check my E Mails.
View 1 Replies
View Related
Dec 7, 2011
My previous laptop ran XP. I backed up my outlook .pst file to an external hard drive. My new laptop runs Win7. After installing Outlook I imported the .pst file. At first everything seemed perfect but then I started realizing that the master category list is not there. Also, the address book had none of my addresses associated with the entries. Only new ones appeared and then not in their proper categories. What can I do to remedy this situation? I feel the categories and addresses must be somewhere in my computer because when I open a contact, I can click on the email icon and send mail.
View 2 Replies
View Related
Feb 12, 2010
Is there an option to export the address book and messages from Thunderbird ? I just cannot seem to find the export option.
Also, if I do manage to export the messages from a 32bit version of Thunderbird, will a 64bit version of Thunderbird be able to import them ?
I am trying to piggy back my address book and messages from Outlook Express on my old WinXP PC to Thunderbird 64bit on my new Windows7 PC. I have imported the address book and messages from Outlook Express on my old PC into a 32 bit version of Thunderbird on the old PC but cannot get any further.
View 4 Replies
View Related
Oct 13, 2012
I noticed that my WLM categories were somehow corrupted and missing some names. When I click the category on the left, in the list of names on the right they are all there. However when clicking edit I notice some addresses are missing. They are also missing when attempting to send mail. When I add the missing addresses and click save they are not actually saved. I tried deleting the category and making a new one and that seemed to work for a while but the next time I logged onto WLM the same names were missing again.
View 2 Replies
View Related
Dec 2, 2012
I'm trying to print out a christmas card list using mail merge in Word. I've entered the names and addresses and the list is fine but when I try to print the addresses on the envelopes, they don't align properly on the envelopes. I've tried different size envelopes from the list provided by Word but the only two that print properly are the size 6 3/4 and the size 9. Unfortunately, I cannot find christmas cards that size. I also tried the custom option on the envelope list to size an envelope but that doesn't work either.
On the menu, I've tried manually adjusting the position of the address block instead of using the auto choice but that doesn't work either. I use an H P C 4700 series printer and I am inserting the envelope properly (along the left side of the paper feed). I've also downloaded lotus symphony and open office in the hope that the printing would work in their wps but there was a file recognition problem. I have used Word 2002 and the Microsoft Word Starter 2010 and my printer works fine.
View 3 Replies
View Related
Aug 28, 2011
My ISP is Time Warner, and I have been very satisfied with their broadband service in the 7 or so years that I have been with them. Lately, however, I decided to subscribe to their 'Turbo Plus' product, which guarantees 20 Mbps download and 2 Mbps upload speeds, or 20 x 2. I wanted this for a better gaming experience, and the faster downloading of large files, such as video files. With installing the new 20 x 2 service, Time Warner installed a new Motorola Surfboard SBG6580 Wireless N Broadband Modem / Router.However, since the new device was put in, I have been getting 'DNS errors' on my PC and other devices, such as "Error - Server not found in DNS".
I never received these with the previous device or service, so I believe that they are related to the new device's settings. I was advised by a tech person that I know to subscribe to the OpenDNS service, and then 'simply' change the DNS IP addresses in the router. Unfortunately, I cannot find a place to set these in the router. There is, however, a place for Dynamic DNS, which uses [URL] I am able to change the DNS IP addresses in my Windows 7 network and sharing center, but this does not help my iPhone, PSP, or other devices on my network. Also, from the OpenDNS site, I read that it is 'better' to make the change in the whole network (router), rather than on each individual device.
Is it better to have the proper DNS addresses in the hardware versus the software on each device? Is there a way to change the DNS addresses in the Motorola SBG6580 that maybe I am just overlooking? Should I purchase new networking equipment, and if so, what brand do you recommend? [I have been somewhat satisfied with the Cisco Valet line, but they seem to only want to help me with that line, and not with helping me solve the overall (new) problem, which I thought would be an opportunity for them to sell new equipment.They told me that what I could get from them, the WCG-200, was available from Time Warner, and that I could then just 'cascade' my Cisco Valet (wireless N) router from that device.] If it gets me a better result in the end run, then I am willing to purchase new equipment. However, I am also on a 'fixed' income, so I can't afford to make purchases that are not necessary, either.
View 1 Replies
View Related
Nov 29, 2011
Want to send 1-3 hundred e-mail addresses a letter , how do I do it ?
View 5 Replies
View Related
Jul 30, 2011
When we receive emails from our server email addresses are in plain text and are not clickable. It is ok from other sources.
View 6 Replies
View Related
Jan 21, 2012
I have bought a new computer with Windows 7 preinstalled. Before setting it up I backed up all my outstanding emails (204 .dbx files) and email addresses (one .wab file size 176kb) from my old computer on to a memory stick. I now want to import them into Windows Live Mail. I have gone through the recommended procedure for the emails, but only some of them have come across. I have been totally unable to import the addresses. The only procedures I have found seem to relate to a different version of Live Mail because they tell me to click on things that don't appear on my screen!It occurs to me that maybe not all the messages are being imported because I haven't imported the relevant contact details. Could this be the case? By the way I can't go back to the old computer as it has completely died, which is why I replaced it.
View 1 Replies
View Related
May 19, 2012
Where are the autocomplete email addresses stored and can they be exported to an Outlook nk2 file?
View 4 Replies
View Related
Apr 26, 2011
I recently bought a USB to RS232 adapter (it works fine). My question is: How can find out which com port it is using, except by trying all of them and then finding the one that works. I have a older Thunderbird GPS 10 MHz frequency standard thet requires a RS232 interface to talk to it (for setup purposes). The first thing it askes me is which com port I'm using(1-16).
View 8 Replies
View Related
Nov 25, 2009
My USB ports on this Gigabyte mobo are SUPPOSED to be all USB2.0
So, how come I still get "This device can run faster" messages in
my Windows 7 64 bit home premium installation?? I went to Gigabytes webpage and installed the chipset drivers for Windows 7 on there, but still get the same message when I plug in my Corsair 4GB jumpdrive.
View 6 Replies
View Related
Nov 5, 2009
First a little background:
System - Dell Inspiron 546, Windows 7 Home Premium x86 64 bit.
I'm an Engineer/Designer/Machinist and work with CAD/CAM programming. After I create the programs with the toolpaths for my CNC Macining Center I use a separate program to transfer the machine control data to the CNC.
Here is my dilemma - Win 7 is not compatable with the old 16 or 32 bit, file transfer program I had been using with XP and Vista. I have found 64 bit programs that are compatible but cannot get the computer and CNC to communicate.
The problem I'm having is, in the file transfer software I need to set the Parameters such a Comm Port, Baud Rate, etc. I cannot determine the port assignment for the usb connections. In XP and Vista they were Comm 4 and I could find that in Device Manager/Ports. Win 7 doesn't seem to have a listing for ports. How do I determine this.
View 2 Replies
View Related
May 12, 2012
I have five USB 2.0 hub successfully operating over 20 devices. As these fail I will upgrade to 3.0. Anticipating more 3.0 devices and a 3.0 motherboard in the future. Why do they only have four ports? If I am mixing 2.0 hub with 3.0 hub's should I plug in. In a certain order
View 2 Replies
View Related
Sep 28, 2011
So I installed some weird file and it like disabled ALL of my USB ports, hwo can I get them to work again?! Both my keyboard and mouse are USB and I don't have any regular ones, any way I can fix this through my 2nd partition using WinXP? im using the Win XP partition to ask this right now, my Win7 partition seems to run fine like when it happened I thought it froze but it didn't because the wifi signal went off from my USB wireless adapter and my mouse+keyboard adapter both light off as well as my DVC 80 capture device. The file I ran was 'libusb-win32-filter-bin-0.1.12.2.exe' from a package I downloaded in a zip called 'iHackintosh iRecovery Package for Windows & Mac' and I REALLY DONT want to restart my computer
View 1 Replies
View Related
Jan 21, 2011
I restarted my computer to return to the login screen and found i have no control of my mouse or keyboard.I have control before Windows loads (in Bios Settings).I have enabled and disabled in every combination possible for the settings of the USB in Bios Settings.I can not system restore. I have no control in safe mode.Basically if it deals with windows, i have no control. Only before windows loads.
View 3 Replies
View Related
May 10, 2011
I noticed recently that for some reason,my USB ports aren't being identified as 2.0 ports, but I know they are. My computer is an ASUS CG5270, Specs: Core 2 Quad @ 2.4 GHZ,8 gigs ram, 750GB hard drive. I tried going into the device manager and uninstalling everything under "USB", and then restarting and replugging everything in..no luck. I found some Fix for Windows 7 SP1...no luck. Whenever I go into the Device Manager, there are two ports ( I think they're ports) listed as "Enhanced", with the rest as "Universal". I keep getting errors when I plug in my external HD that "this device could perform faster". (I also get another message telling me that the drive needs to be formatted, but it works anyway). I also get a "this device could perform faster" with my webcam, as well...
View 9 Replies
View Related
Jan 12, 2013
When I plug a USB device into my laptop it doesn't recognize it Shown Here: Rec008.avi - download now for free. File sharing. Software file sharing. Free file hosting. File upload.
View 1 Replies
View Related
Jan 9, 2009
first of all i would like to excuse for my rusty english... passed some time since i last wrote something completely in english ;-)
i'm using the x86 version of build 7000 and i'm very fascinated of how it works already in this beta-stage. but i have a strange crashing-issue from time to time that does not allow me further testing.
from time to time all of my usb-ports seem to block everything: my usb-soundcard stops working, my wireless-adapter, my external hd, everything that's plugged-in into an usb-port stops working.
it happens when i'm using my soundcard, videocard or both of them: playing games, watching dvds, browsing Internet, listening to music, etc.
when i'm trying to reboot, the os will stuck in the logging-off-screen 'cause it's trying to play the logoff-sound over my soundcard..
View 9 Replies
View Related
Nov 7, 2010
On my Dell Vostro laptop, Up until today I never had a problem but now when I plug in my energy monitor to a USB port I do.. I have a mouse plugged in one port. If I plug in my energy monitor into any of the other 3 USB ports it installs a USB to serial port at the next higher com number. Its up to com 18 now. If I unplug and replug it in again it will find USB to serial com 19. It just keeps going up. How can I reset it back to 3 or 4.
View 2 Replies
View Related
Apr 21, 2012
as soon as i connect anything to the usb port, i get the message "usb device not recognised". i have tried to go back to various restore points but these all fail to complete.
View 2 Replies
View Related
Jul 3, 2012
I am not going to tell my problem or trouble but rather to tell what I had done based on what I found out from other responses to "related issues" subjected above.I just thought that I must do this for the sake of others, brothers and sisters in Jesus Christ wanted to go back to the threads that his but I am not that fond of using the search fields and somehow my google search results on this lappy is quite differ from the one i got on the usb-troubled lappy that i used to log into sevenforums. i have read through just about 10 of the related result on sevenforums but not one of them is the one i found out earlier.anyways, what i did was: uninstalled all usb listings in device manager and then just shut down the lappy, unplug all cables including power cable and went out for a smoke. a few minutes later, came back and plugged the power cord and turned on the lappy. and somehow, windows auto-install everything and since the lappy is wirelessly connected to the internet like always, it also download and install everything.then i plug the main cause of the problem (microsoft 5-button intelligent mouse) and wait for the driver update wizard to complete; and now everything not only seems working fine, BUT actually working fine now.
View 1 Replies
View Related