Ricoh C5000 PCL5 Print Driver Wants To Install After Every Cold Boot?
Sep 9, 2011
We are just rolling Windows 7 out as we update machines. so far we have a dozen or so HP's (not my choice)with Windows 7. We are using Win2003 server as our File and Print.The printer causing issues is a RICOH Aficio MP using the latest C5000 PCL 5c driver.Our issue is on every cold boot on *most* machines first print of the day we get Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the\servername computer to print to PRINTERNAME. Proceed only if you trust he\servername computer and the network, and then restart the print job."You add the driver, everytime, but makes no difference. Everything works fine for the day, if you hibernate the laptops and bring back to life, its fine.. but its only on a cold boot.Anyone got clues, it seems to be very common when googling,
I recently built a new system running windows 7 home premium 64bit. I downloaded the latest drivers for all the hardware in my system and completed as much updates for the OS that were available.
What is happening is each cold boot of the computer, I will ALWAYS BSOD within the first few minutes, after the mouse starts to lag really bad and skip around. If i IMMEDIATELY restart the computer, it will literally run for weeks without a hiccup.I have replaced nearly every part of my rig minus the CPU and Memory. I've put in a new MOBO, SSD/SATA drives, Video card, Power supply. Flashed the BIOS with the latest version. The only thing left is the CPU.I've recently ran the windows memory diagnostics everything passed fine, but I've bought new memory just in case - will try that tonight.
I ordered the parts online and put them together myself. At first everything worked fine, I got Windows 7 up and running and drivers were installed without error. Then I decided to try and overclock my i5 2500k, since I have little experience with overclocking in general I googled a little and read up on a few step-by-step tutorials on how to go about with this. I'm not sure wether or not it's something I've meddled with that caused this problem, but in the middle of clicking around in my BIOS my computer suddenly dies. On reboot it halts and crashes after a few seconds only to reboot again before it even gets to the initial boot screen. It keeps going like this for 3-4 consecutive crashes until I pull the power. I open up my case and since my motherboard has a "mem-ok!" button which, according to the manual is used to reset BIOS and allow a safe boot. I press and hold for 5 seconds and it boots correctly and lets me undo any changes I've done to the BIOS. Everything seemed to be in working order, but now whenever I do a cold boot it still halts and crashes once or twice before it does a succesful boot.
Everytime i start my computer from cold i go through my bios screen then come to the windows 7 screen where the windows fly to you and float/wave It hangs wont go to the log in screen or anything. I have to do a force shut down with my power button. When i start my computer again it goes fast to the "windows did not boot properly screen" I click start windows normally and it boots super fast. and on every restart it boots fine. Just from a first cold start.. What could be the problem?
i got a 3 years old machine and all was working great,but now ( this month) i have multiple BSOD . i have recently replace my power supply for a 650 w it worked until i had those BSOD but now only on cold boot*recently reinstall win 7 64 bit home premium to see if it will worked, but no luck. [code]
Every day I come home and boot up my computer, and every day it BSODs either instantly or within 10 minutes, once I restart it seems to be fine and will run for DAYS. Also seems like all of my last systems have been having the same problem, so possibly it's some of the hardware I have been re-using, but it is beyond me to figure out and I just need it to stop..Windows 7 x64 full retail, fresh installed in the last 2-3 months, problem didn't exist immediately..Hardware varies from a few months old (motherboard, cpu) to a few years old (video card, hard drives, some older and some newer ram). I have tried with multiple different hard drives with fresh installs of Windows as well as different RAM combinations and configurations.
was wondering if anyone knows where i can find this driver for windows xp (i just installed a dual boot system), ive been searching for a day and a half and i cant find it. my 'everest ultimate' says it a 'ricoh rl5c832 ieee 1394 controller'. im trying to hook up my tascam firewire audio card but it doesnt work. the current driver installed is dated 2001.
My office system is a Dell w/ Win7 and it's been running fine up until 1 month ago. Then it started this odd behavior. On a cold boot it runs about 5x to 20x times slower than normal, almost as if it's just running on a single core locked at 5%. Boot time to hit splash screen is 2.5 to 4.5 minutes (normal is 30 secs). And once I hit return on my pwd the system continues to run in super slow motion. If I just force a reboot, select Boot Windows Normally from the trouble menu, the the system boots in 30 secs, logs in fine, and runs normally.My boss has told me that other Win7 computers he owns/operates are now doing the same thing.I've no idea what could be causing this. Hearing that other Win7 computers are doing it tends to make me believe it isn't a problem specific to this computer or even this small office network. There are no USB devices other than the mouse and keyboard and we've switched those out. We'd recently installed virus protection software, but we removed that and the problem still continues.
The only other thing I can think of, is that we recently installed a printer driver so the system could print to a Brothers laser printer attached via USB to a computer across the local network. And come to think of it, my system wouldn't even see that printer and allow driver installation until we plugged the printer directly into my system. After installation we moved the printer back, and changed the settings for the system to find the printer across the network. I'll look into uninstalling that driver next time I'm in the office.
Update: New day, new slow boot. This time I forced an early reboot and I got the option to start a Windows Startup Repair. I started that, skipped doing a System Restore and let it run. Finally it came back with all tests fine except the following which crashed: System Files Integrity Check and Repair , Failed , Error Code #0x490 , Time Taken = 541573 ms. So it looks like the test that checks for problems crashed, leaving me to wonder if there might still be some hidden problem. And yet reboots run perfectly normal.
This is on a loptop Meldon E6882, running windows 7, to a LED TV HD. From a cold boot both the laptop monitor and HDMI screen show the windows starting screen .. But the HDMI screen goes blank when the login screen appears. I have tried different screen resolutions. No Luck. I have tried from the 'screen resolution' page to get automatically detect the HDMI - No luck I have tried from the 'screen resolution' page to manually select HDMI. Only offers VGA or component, no HDMI.
I think this maybe a disabled driver as I did a manual disabling of these some time ago in order to try and reduce the boot time. I cannot recall the names of the drivers I have put into manual start (some time ago), nor have I found any info on what drivers are needed for the HDMI. The screen driver is an Intel(R) HD Graphics 3000. I'd like to look at some video on the larger screen...
After installing Windows 7068 I have had problems with the Ricoh xD card driver from MS update. First time BSOD for me with Windows 7.
So far this is the only version that has presented this problem. Even downloading the driver from other sources does not help. It installs the driver and then I get this
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Finally decided to just leave it alone and see what happens.
I have installed windows 7 on my computer about a year ago. I've never had any problems to the point where I would need to reinstall the OS, however, I've noticed that on cold boots the system runs painfully slow, it will boot up fairly fast on a normal restart tho, like 20-35 seconds. On a cold boot it can take about 1-2 minutes to load in windows, and then once that happens its not so much it going slow as that there is a point during which I cannot click anything or else it will take forever to accomplish.
What I mean by this is, it will load to my desktop and for a period of about 3 more minutes I will try to right click on the desktop and it will do the circle thing for like 20 seconds before giving me the drop down menu. If I right click again right after, it shows up instantly. Same with trying to open up a file within those first couple of minutes. It will take like 45 seconds to open a picture. I have tweaked my windows 7 to startup only necessary drivers and turned off search index along with Aero.
My HDD isn't fragmented and I've got about 120gbs out of 450 available. So its not that bad. Now some of you may say, well its just loading the processes. But I only have catalyst control center loading up as a startup item. And even after it loads. It goes through a wierd 3-4 minute phase in which everything is slow as hell. Then works perfectly fine.
My system is an E1505 Dell. Unfortunately, Windows forgot to tell me that this wouldn't be functional in 7. (Crazy right?) Well, now its not allowing me to go into sleepmode with out crashing and it randomly gives me a BSOD. So has anyone come across a driver for...
- Ricoh Memory Stick Controller
- Ricoh SD/MMC Host Controller
- Ricoh xD- Picture Card Controller
- Ricoh 1394 OHCI Compliant Host Controller
AKA Embedded Ricoh Memory Card reader. I tried disabling them because I rarely use them but every time I do I get a BSOD.
on my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader.
It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer".
The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time.
When I try to format, it does it with the good size detected! I tested by looking with another computer.
So, this problem is weird, I never had any issue similar to that in the past.
I've upgraded my Sony Vaio VGN-CCS115J to 64-Bit Windows 7. Would like to upgrade my ricoh sd mmc disk device driver to sdhc, but the only update Sony Vaio gave me was for the SD. I've googled online and found a variety of solutions for VISTA and XP but not for Windows 7.
I have a Kingston/Ricoh SD card (8 GB). When I eject it via "safely remove hardware" tray icon and then insert it to another laptop, it always warns to scan for errors but after scanning there is always no problem found. Why do I always get this scary warning? A USB key (also 8 GB) does not do this.
My Sony VGN-NW320f using windows 7 Pro Ricoh memory stick controller keep giving me an error every time I try to install a new USB device like, USB INTERNET hub, black playbook, any usb phone cant connect to desktop software. In the divice manager it says driver cannot verify the Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
I have a samsung x60 Plus which as of yet has no windows 7 specific drivers but it does have Vista.
The laptop has a ricoh card reader (xd, sd smc) this does work as I have rebooted into XP and it reads and writes fine.
In windows 7 I either end up with the standard SDA driver that Windows 7 installs which reports as working correctly but nothing happens when you enter a memory card OR I get error code 10 cannot start, depending on which set of the various vista and windows 7 drivers I have tried.
So far I have tried;
Generic Ricoh windows 7 card reader drivers
Samsung x60 Vista card drivers and vista chipset drivers
Windows standard drivers
Anyone have any ideas..? Does seem to be a fairly common problem but I have tried quite a few solutions with no luck.
I have built my computer about 2 months ago now, and had nothing but issues with it, display drivers stopped responding, alot of BSOD (bccode 1a and 50), black screens, lockups and so forth, i have FINALLY read enough forums over this 2 month period to solve majority of problems accept one, Computer runs fine, but every morning on cold bootup it'll start to load POST and then go to a black screen and just stay there unless i reboot the computer and then it'll bootup fine. I will turn off the computer after that and go to work for about 8-10hours come home and turn it on all fine, untill the next day. I have tried new ram, fail safe settings in bios, updated bios to the lastest, bought a new power supply, tried reconnecting everything, unpluged storage harddrive. Only thing i could think of causing the problem is my video card drivers, because as soon as i install the drivers i get "drivers have stopped responding but have recovered" screen would lock up freeze/artifacts and then come back, until i changed my idle clocked from 157/300 to 400/900 and it sorted out that problem, but those settings dont kick in until i reach into desktop, could it be trying to load the ati drivers during post and black screening?
What can I do to make my graphics card work perfect but not messing up the pc I have tried downloading the drivers got hold of various versions tried them but they kept on giving me the problem, with a black screen after window logo loading.
I have an ASUS n80vn laptop that is about 3 years old. It came with OEM Windows Vista, but I installed my own copy of Windows 7 Professional 64bit more than two years ago, and there was no problem upon installation.
Lately (for about a month), I have been receiving BSOD either during boot or the log-in screen. The BSOD usually happens only once per day, and I would be forced to restart my computer. No BSOD upon restart. I suspect the problem occurs when the laptop is cold. I have attached the BSOD Dump files collected over the past month.
The only driver change I've had was nVidia graphic driver updates. I've uninstalled and reinstalled the two most recent drivers and the BSOD problem still occurs.
On a side note, I have been getting random freeze-ups too, and this has been happening before the BSOD problem. These freezes occur when I'm doing regular tasks such as web browsing or typing in Word/Excel etc. When my system freezes, there is no BSOD, but nothing can be moved (keyboard + mouse won't do anything). Closing lid does nothing too. Strangely, I have not been getting this kind of freezes when I play games.
Quick rundown of specs: -Windows 7 Professional 64bit (retail) -Age of hardware: ~3 years -Age of OS: ~2 -Processor: Intel core duo P8600 2.40 GHz -RAM: 4GB -GPU: GeForce 9650m GT
I have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other problem causing the BSOD but now I am not so sure.
This is not a typical BSOD crash. My Dell Inspiron's monitor intermittently doesn't wake up once power management shuts it off. The problem is monitor doesn't fully shut off. One way to know the monitor won't wake up is when the CPU is griding away, fan is on full blast, laptop heated up, monitor still has a faint white brightness but no disk activity. I have tried connecting the laptop HDMI and VGA output different monitors and TVs but the monitor/ TV doesn't recognize any input signal during this phase. Yesterday, CPU suddenly started griding away without a pause while I was working and the base plastic was so hot I couldn't place it on my lap anymore. System Idle was 95-99%; I wanted to check whether laptop will not wakeup after power management kicks and this morning I couldn't wake up the laptop and had to cold boot it
I cannot put my laptop to sleep or hibernate when this occurs, the computer will just keep griding away with fan at full blast but will never hibernate or sleep.
I've run chkdsk, defrag etc but no issues were reported. I have checked for viruses etc, nothing obvious.
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
At places where I have worked (XP systems), one of the printer choices was "Adobe PDF". When you print to it, it creates a PDF file. I beleive this driver came from Adobe. Is this driver free?I would like to get this driver for my home Win 7 system but have not been able to find it. I have found similar drivers from other providers, but not Adobe. Some of these drivers require payment which leads me to believe Adobe does not give this away free.
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
