I have a samsung x60 Plus which as of yet has no windows 7 specific drivers but it does have Vista.
The laptop has a ricoh card reader (xd, sd smc) this does work as I have rebooted into XP and it reads and writes fine.
In windows 7 I either end up with the standard SDA driver that Windows 7 installs which reports as working correctly but nothing happens when you enter a memory card OR I get error code 10 cannot start, depending on which set of the various vista and windows 7 drivers I have tried.
So far I have tried;
Generic Ricoh windows 7 card reader drivers
Samsung x60 Vista card drivers and vista chipset drivers
Windows standard drivers
Anyone have any ideas..? Does seem to be a fairly common problem but I have tried quite a few solutions with no luck.
on my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader.
It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer".
The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time.
When I try to format, it does it with the good size detected! I tested by looking with another computer.
So, this problem is weird, I never had any issue similar to that in the past.
I've upgraded my Sony Vaio VGN-CCS115J to 64-Bit Windows 7. Would like to upgrade my ricoh sd mmc disk device driver to sdhc, but the only update Sony Vaio gave me was for the SD. I've googled online and found a variety of solutions for VISTA and XP but not for Windows 7.
After installing Windows 7068 I have had problems with the Ricoh xD card driver from MS update. First time BSOD for me with Windows 7.
So far this is the only version that has presented this problem. Even downloading the driver from other sources does not help. It installs the driver and then I get this
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Finally decided to just leave it alone and see what happens.
I have a Kingston/Ricoh SD card (8 GB). When I eject it via "safely remove hardware" tray icon and then insert it to another laptop, it always warns to scan for errors but after scanning there is always no problem found. Why do I always get this scary warning? A USB key (also 8 GB) does not do this.
I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it,reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
im running an evga sli 58x, and windows 7 64bit 7077
i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem
anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
I'm running Windows 7 RC on HP nw8000 and I'm pretty sure the card reader worked ok on Vista Ultimate 32.
Has anyone found a driver for the built-in SD card reader? HP doesn't list anything past XP on their site, not even for Vista for this device for this notebook.
I have several internal card readers for my desktop computer. Two are Rosewill brand from NewEgg and one is RocketFish from BestBuy. They are all of the type that read SDHC, CF and a host of other cards and also have a USB port for a flash drive. They all connect to main board dual-port headers.For no reason apparent to me, the card readers still read USB flash drives but do not even acknowledge any flash memory cards at all in any manner. It is as though I did not insert one at all. I researched the 'net and found some things to try (registry edits, scanning for malware, disconnecting the power cord for several hours, etc.etc.); but, after several hours of troubleshooting, I decided I had three bad card readers. In a last act of desperation, I restored the OS to an Acronis image I made several months back and now the card readers function flawlessly,So, where in Windows 7 can I begin to look for a cause/solution to this kind of problem if it happens again? It probably will happen again as I already have an XP system where the problem has popped up with these same card readers.Additional Info: I have an external reader that functioned fine on the same systems on which the internal readers did not work.
I have a multi-function card reader installed in my computer and it will not read any of the flash cards I have, this card reader has USB connection on the front which works fine. I am attaching a screen shot it is the generic USB Hub right under Universal Serial Bus controllers that is the cause of this problem. As you can see the the Sony cam USB device on this hub is working fine, but I cannot plug in any CF Flash XD or SD or MS flash card to the reader they are not seen. I have disabled the reader restarted the computer no luck. I am sure it is a realtek card reader I have tried installing latest driver from realtek with no luck. This was working fine in the past in fact the realtek drivers also worked and showed up in device manager.
On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up and then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader and the same negative results. this was tried with 3 different sim cards.
I have/had a HP Pavilion P6510f and the mobo died. I replaced it with a Gigabyte 880GM-UD2H and now I can't get my internal card reader to be recognized. It's a 5 pin and I have plugged it into the empty FUSB slot and still not being recognized.In device manager, it doesn't show and the only issue is an ethernet card.I can't seem to figure out what to do to get it to work...
I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new Windows 7 build 7100, I've tried go to realtek driver web site, downloaded the Windows 7 driver version also got the win vista version. but nothing worked for me..
