BSOD Within Minutes Of Cold Boot Every Time?
Jul 16, 2012
Every day I come home and boot up my computer, and every day it BSODs either instantly or within 10 minutes, once I restart it seems to be fine and will run for DAYS. Also seems like all of my last systems have been having the same problem, so possibly it's some of the hardware I have been re-using, but it is beyond me to figure out and I just need it to stop..Windows 7 x64 full retail, fresh installed in the last 2-3 months, problem didn't exist immediately..Hardware varies from a few months old (motherboard, cpu) to a few years old (video card, hard drives, some older and some newer ram). I have tried with multiple different hard drives with fresh installs of Windows as well as different RAM combinations and configurations.
View 1 Replies
ADVERTISEMENT
Sep 5, 2012
I have BSOD on a cold startup everyday. On most time after the first BSOD of the day the PC will run fine for that whole day. There will be two consecutive BSOD on certain occasions. The problem stops for a week after I updated the NEC USB 3.0 Host controller so it seems there is other problem causing the BSOD but now I am not so sure.
View 6 Replies
View Related
Feb 20, 2012
I recently built a new system running windows 7 home premium 64bit. I downloaded the latest drivers for all the hardware in my system and completed as much updates for the OS that were available.
View 3 Replies
View Related
Feb 2, 2011
What is happening is each cold boot of the computer, I will ALWAYS BSOD within the first few minutes, after the mouse starts to lag really bad and skip around. If i IMMEDIATELY restart the computer, it will literally run for weeks without a hiccup.I have replaced nearly every part of my rig minus the CPU and Memory. I've put in a new MOBO, SSD/SATA drives, Video card, Power supply. Flashed the BIOS with the latest version. The only thing left is the CPU.I've recently ran the windows memory diagnostics everything passed fine, but I've bought new memory just in case - will try that tonight.
View 4 Replies
View Related
Jan 24, 2012
i got a 3 years old machine and all was working great,but now ( this month) i have multiple BSOD . i have recently replace my power supply for a 650 w it worked until i had those BSOD but now only on cold boot*recently reinstall win 7 64 bit home premium to see if it will worked, but no luck. [code]
View 9 Replies
View Related
Aug 16, 2012
Since last week I started having the BSOD problem , my computer just restarting out of nowhere. Before this happening i did not install /add new hardware or software.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1048
Additional information about the problem:
BCCode: a
BCP1: 00000000
BCP2: 00000002
BCP3: 00000001
BCP4: E2C4A7F3
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that describe the problem:
C:WindowsMinidump81612-89968-01.dmp
C:UsersHomeAppDataLocalTempWER-98515-0.sysdata.xml
View 6 Replies
View Related
Aug 4, 2010
Yesterday I installed Windows 7 on my brother's PC. He had been using Vista previously. Upon booting to the installer, the "Starting Windows" screen would appear with the animated windows logo. This screen took 20 minutes of waiting to get past, so for ages I thought it wasn't going to work at all. Eventually I left it on long enough to get through to the first stage of installation. Everything went ok during install, I formatted the single partition on the HDD and told Win7 to install there. The next two times the install had to restart the computer, the huge delay on getting past the "Starting Windows" screen remained (keep in mind this is before/during the install). Vista had no such issues with boot times. And now that Windows 7 is installed, the boot issues remain, even after installing all available windows updates, updating graphics/mobo/sound/mouse/keyboard drivers, etc. I have checked the Event Log as I have read that you can diagnose possible boot problems in there, but there doesn't appear to be any Boot Events logged, all I see in the Diagnostics-Performance log are Shutdown events.
Specs are as follows:
Windows 7 Ultimate x64 RTM
Core 2 Quad 2.8Ghz
3GB DDR2 RAM
500GB Samsung SATA 7200rpm HDD
Nvidia 9800GTX
XFX nForce 780i SLI Motherboard (BIOS ver. P09)
I have tried many things to fix it, such as removing various RAM modules, enabling/disabling various BIOS settings relating to USB/IDE (I don't use any IDE devices but thought I'd try)/RAID etc (also don't have my single HDD in RAID).
View 9 Replies
View Related
Nov 24, 2011
I have an ASUS n80vn laptop that is about 3 years old. It came with OEM Windows Vista, but I installed my own copy of Windows 7 Professional 64bit more than two years ago, and there was no problem upon installation.
Lately (for about a month), I have been receiving BSOD either during boot or the log-in screen. The BSOD usually happens only once per day, and I would be forced to restart my computer. No BSOD upon restart. I suspect the problem occurs when the laptop is cold. I have attached the BSOD Dump files collected over the past month.
The only driver change I've had was nVidia graphic driver updates. I've uninstalled and reinstalled the two most recent drivers and the BSOD problem still occurs.
On a side note, I have been getting random freeze-ups too, and this has been happening before the BSOD problem. These freezes occur when I'm doing regular tasks such as web browsing or typing in Word/Excel etc. When my system freezes, there is no BSOD, but nothing can be moved (keyboard + mouse won't do anything). Closing lid does nothing too. Strangely, I have not been getting this kind of freezes when I play games.
Quick rundown of specs:
-Windows 7 Professional 64bit (retail)
-Age of hardware: ~3 years
-Age of OS: ~2
-Processor: Intel core duo P8600 2.40 GHz
-RAM: 4GB
-GPU: GeForce 9650m GT
View 3 Replies
View Related
Aug 22, 2011
I ordered the parts online and put them together myself. At first everything worked fine, I got Windows 7 up and running and drivers were installed without error. Then I decided to try and overclock my i5 2500k, since I have little experience with overclocking in general I googled a little and read up on a few step-by-step tutorials on how to go about with this. I'm not sure wether or not it's something I've meddled with that caused this problem, but in the middle of clicking around in my BIOS my computer suddenly dies. On reboot it halts and crashes after a few seconds only to reboot again before it even gets to the initial boot screen. It keeps going like this for 3-4 consecutive crashes until I pull the power. I open up my case and since my motherboard has a "mem-ok!" button which, according to the manual is used to reset BIOS and allow a safe boot. I press and hold for 5 seconds and it boots correctly and lets me undo any changes I've done to the BIOS. Everything seemed to be in working order, but now whenever I do a cold boot it still halts and crashes once or twice before it does a succesful boot.
View 5 Replies
View Related
Dec 3, 2009
Everytime i start my computer from cold i go through my bios screen then come to the windows 7 screen where the windows fly to you and float/wave It hangs wont go to the log in screen or anything. I have to do a force shut down with my power button. When i start my computer again it goes fast to the "windows did not boot properly screen" I click start windows normally and it boots super fast. and on every restart it boots fine. Just from a first cold start.. What could be the problem?
View 1 Replies
View Related
Jan 23, 2012
I usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.
This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.
I am running a Dell Latitude D620.
Windows 7 Pro 32 bit (fully licensed)
4 GB RAM
Intel T2500 2.00 GHz processor
Joined to a domain
Attached is the BSOD reports requested.
View 9 Replies
View Related
Jul 10, 2012
Every time I try and start my laptop I get the BSOD. I tried going to Last Known Good Configuration and it seemed to work as it did not crash immediately, but when I opened the internet the BSOD came back.I attached the dump files and health report and my specs are as follows.
View 3 Replies
View Related
Nov 25, 2010
My office system is a Dell w/ Win7 and it's been running fine up until 1 month ago. Then it started this odd behavior. On a cold boot it runs about 5x to 20x times slower than normal, almost as if it's just running on a single core locked at 5%. Boot time to hit splash screen is 2.5 to 4.5 minutes (normal is 30 secs). And once I hit return on my pwd the system continues to run in super slow motion. If I just force a reboot, select Boot Windows Normally from the trouble menu, the the system boots in 30 secs, logs in fine, and runs normally.My boss has told me that other Win7 computers he owns/operates are now doing the same thing.I've no idea what could be causing this. Hearing that other Win7 computers are doing it tends to make me believe it isn't a problem specific to this computer or even this small office network. There are no USB devices other than the mouse and keyboard and we've switched those out. We'd recently installed virus protection software, but we removed that and the problem still continues.
The only other thing I can think of, is that we recently installed a printer driver so the system could print to a Brothers laser printer attached via USB to a computer across the local network. And come to think of it, my system wouldn't even see that printer and allow driver installation until we plugged the printer directly into my system. After installation we moved the printer back, and changed the settings for the system to find the printer across the network. I'll look into uninstalling that driver next time I'm in the office.
Update: New day, new slow boot. This time I forced an early reboot and I got the option to start a Windows Startup Repair. I started that, skipped doing a System Restore and let it run. Finally it came back with all tests fine except the following which crashed: System Files Integrity Check and Repair , Failed , Error Code #0x490 , Time Taken = 541573 ms. So it looks like the test that checks for problems crashed, leaving me to wonder if there might still be some hidden problem. And yet reboots run perfectly normal.
View 6 Replies
View Related
Dec 7, 2012
This is on a loptop Meldon E6882, running windows 7, to a LED TV HD. From a cold boot both the laptop monitor and HDMI screen show the windows starting screen .. But the HDMI screen goes blank when the login screen appears. I have tried different screen resolutions. No Luck. I have tried from the 'screen resolution' page to get automatically detect the HDMI - No luck I have tried from the 'screen resolution' page to manually select HDMI. Only offers VGA or component, no HDMI.
I think this maybe a disabled driver as I did a manual disabling of these some time ago in order to try and reduce the boot time. I cannot recall the names of the drivers I have put into manual start (some time ago), nor have I found any info on what drivers are needed for the HDMI. The screen driver is an Intel(R) HD Graphics 3000. I'd like to look at some video on the larger screen...
View 4 Replies
View Related
Mar 25, 2012
I've had this problem for a while and it drives me nuts. Every time I shut down my computer it will crash the next time I power up and try to boot windows 7. I can go in and out of sleep or hibernate without issue but if I ever shut down my system it will BSOD during the next power on. After this initial BSOD there are usually a series of BSOD (usually they report different error codes) in subsequent restarts. Eventually the system does seem to stabilize and stop crashing. Once things are working it will run for literally months without another BSOD.
Win 7 Ultimate x64 (retail)
8gb DDR3 ram
i5 750 @ 2.67ghz
RadeonHD 5770 1gb
system is less than 2 years old and OS was last installed ~18 months ago (c: partition reformat and clean install)
View 5 Replies
View Related
Sep 9, 2011
We are just rolling Windows 7 out as we update machines. so far we have a dozen or so HP's (not my choice)with Windows 7. We are using Win2003 server as our File and Print.The printer causing issues is a RICOH Aficio MP using the latest C5000 PCL 5c driver.Our issue is on every cold boot on *most* machines first print of the day we get Error Message: "Do you trust this printer? Windows needs to download and install a software driver from the\servername computer to print to PRINTERNAME. Proceed only if you trust he\servername computer and the network, and then restart the print job."You add the driver, everytime, but makes no difference. Everything works fine for the day, if you hibernate the laptops and bring back to life, its fine.. but its only on a cold boot.Anyone got clues, it seems to be very common when googling,
View 1 Replies
View Related
Feb 9, 2011
I have installed windows 7 on my computer about a year ago. I've never had any problems to the point where I would need to reinstall the OS, however, I've noticed that on cold boots the system runs painfully slow, it will boot up fairly fast on a normal restart tho, like 20-35 seconds. On a cold boot it can take about 1-2 minutes to load in windows, and then once that happens its not so much it going slow as that there is a point during which I cannot click anything or else it will take forever to accomplish.
What I mean by this is, it will load to my desktop and for a period of about 3 more minutes I will try to right click on the desktop and it will do the circle thing for like 20 seconds before giving me the drop down menu. If I right click again right after, it shows up instantly. Same with trying to open up a file within those first couple of minutes. It will take like 45 seconds to open a picture. I have tweaked my windows 7 to startup only necessary drivers and turned off search index along with Aero.
My HDD isn't fragmented and I've got about 120gbs out of 450 available. So its not that bad. Now some of you may say, well its just loading the processes. But I only have catalyst control center loading up as a startup item. And even after it loads. It goes through a wierd 3-4 minute phase in which everything is slow as hell. Then works perfectly fine.
View 5 Replies
View Related
Mar 5, 2011
Is there any registry hack that can allow me to shutdown windows after "x" mins whenever I click shutdown (or press shutdown button) my system?
View 9 Replies
View Related
Nov 12, 2009
I'm using Windows 7 x64 Ultimate. I have my power options set to turn off the monitor after 20 minutes and the computer is not set to sleep or hibernate. When over 20 minutes has expired, the monitors do not turn off. On rare occasion they do, though (by 'they' I am referring to dual monitors).
I Googled this issue and tried disabling "Allow this device to wake the computer" on the properties page for that network device in device manager. This didn't work. What could be preventing my displays from automatically turning off? Note that during this time I have torrents running, so I'm not sure if it is indeed still the network connectivity that is causing this issue. I never had this kind of problem in Windows XP.
View 6 Replies
View Related
Feb 23, 2011
I have come over to the UK to visit family and my work laptop cannot browse for more than a couple of minutes at a time. Chat clients all work without issue, Dropbox doesn't have a problem. The Cisco VPN client connects happily when it needs to. Just the browsers stop being able to resolve IP addresses.I am connected to wireless correctly, I get an IP (192.168.0.6) from the router (192.168.0.1). DHCP provides the DNS without issue. I can ping the router and the ISP DNS servers...but still no joy.I managed to get some joy when running ipconfig /flushdns everytime it stopped. But this is inconsistent.Firefox, IE and Chrome all work for a couple of minutes after a reboot and then just stop being able to browse. As I said, when it stops, I can still ping everything listed above comfortably..but no host names resolve.My Android phone connects seemlessly and doesn't drop out. I am typing from my parents laptop at the moment..no issues, my brothers laptop, no problems.
Every device seems to work without issue except my work laptop, which I use wirelessly at home, in hotels, starbucks...you name it, I can use it no problem.I have removed the connection and re-added.I have connected via standard WPA2 key and last night tried via WPS. Each time, the laptop connects without issue, all of my messengers connect...2 minutes into browsing the web...DNS stops resolving. I even added Google DNS servers and set a manual IP...same issue each time.I found the Winsock Fix for Windows 7, applied it and restarted. So far so good...obviously, I will come back if it fails again
View 1 Replies
View Related
Aug 10, 2010
- Windows 7 Pro in a workplace.When a unser logs to a machine for the first time, it takes around 3 minutes to create the profile, it hangs at "Preparing your desktop". After the initial logon, the time is more normal, around 10-25 seconds.What could cause such a long delay to initiate the profile?
View 6 Replies
View Related
Aug 13, 2010
Running a brand new HP desktop machine. I've been using it for about a week with no problems ... until today. Certain programs are acting like they aren't launching, but at about 5-10 minutes later, they finally launch. Even the Recycle Bin took about 5 minutes to come up. However, Firefox launches immediately.
4GB of RAM
AMD Athlon II X2 250 Processor @ 3.00 GHz
64 bit
View 9 Replies
View Related
Aug 28, 2012
I have BSOD problem only when computer is "cold". example: After night when computer was turned off.
After a few restarts the computer starts normally and I can reboot, turn of and on with no problem until is "warm". When switching off for a few hours BSOD comes back.
View 7 Replies
View Related
Oct 3, 2012
Wife was playing Lord of the Rings Online on the PC while I was at work and got a BSOD twice within 20 minutes. In the past month I have installed an SSD and upgraded my RAM, but I'm REALLY hoping that's not the culprit. Could I get some help making sense of the minidumps (attached)? I'm currently posting from the affected computer:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, Intel64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 6074 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 60954 MB, Free - 18691 MB; D: Total - 715402 MB, Free - 123497 MB; E: Total - 715402 MB, Free - 233996 MB;
Motherboard: Intel Corporation, DP35DP
Antivirus: Microsoft Security Essentials, Updated and Enabled
PSU: LOGISYS Computer PS650U12 650W ATX12V / EPS12V SLI Ready CrossFire Ready Power Supply
View 10 Replies
View Related
Mar 20, 2012
Getting this BSOD when starting it up in the morning. Afterwards the computer runs normally.I've tried to enable creating minidumps, but 3 days in (and 3 bsod's) it hasn't created one yet.I've copied info from the BSOD and Event Viewer below. Please let me know if any more info is needed.-Technical Information from the BSOD below: Code: *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA00E399B30, 0xFFFFFA800E399E10, 0xFFFFF80002F935F0)
View 9 Replies
View Related
Jun 11, 2012
Windows 7
4gb ram
gforce 470gtx
I tried to install Max Payne 3, but in the ending of installation my PC just freeze and restart. I didnt know what is wrong, so i tried to install new DirectX, newest GPU drivers and so. But problem was still same. After that all, my pc just start freezing after a few minutes on desktop and begin autorestarting.I tried to uninstall GPU drivers in Safe Mode, but theres same problem. Also I tried to use "last good known condition" but problem is same.I also used MemTest, 2x pass, no errors, and also no errors in HD Tune..
View 1 Replies
View Related
Jun 20, 2012
I have recently been experiencing a BSOD everytime i startup (in normal or safe-mode) around 40-50 minutes after startup. It seems to just shut down every program then go to BSOD while is able to create a dump file but never automatically restart.I've also used spy-bot and Malwarebyte to find any corruptions or viruses and nothing fixed the problem. I've google'd and couldn't find anything to my predicament from other BSOD's. I personally think it's the RAM going bad (this is a built computer by a friend about 8 months ago, top of the line gamer computer, windows 7 ultimate).
View 7 Replies
View Related
Jul 16, 2012
Windows 7 Home 64 bit2010 original software on latoI keep getting the BSOD in normal mode after a few minutes of starting my laptop. It is giving me the error PAGE_FAULT_IN_NONPAGE and it is saying that it is caused by driver "ntoskrnl.exe" I have attached the dump and system report
View 1 Replies
View Related
Jul 22, 2012
Happens no matter what I do, tried a fresh windows install and I still get it. This started happening after a lightning storm so Im guessing they're connected
View 1 Replies
View Related
Aug 6, 2012
When I tried logging in this morning I got a BSOD saying "PAGE_FAULT_IN_NONPAGED_AREA". It kept happening after rebooting so I used system restore and that went away. But then I got a BSOD saying "a clock interrupt was not received on the secondary processor". This happens either right when I log in, or within about 10 minutes. I've been in safe mode for about an hour and it's been okay. I ran memtest86 for a few hours but there were no errors. I also cleared the CMOS.
View 1 Replies
View Related
Aug 28, 2012
I am facing this error after every 5-10 after restarting pc.I am attaching files created by SF Diagnostic Tool - Using for Troubleshooting..
View 1 Replies
View Related
