I have 5 computers connected to my router on a gigabit LAN. Two of the computers are WINDOWS 7 machines, one is a Windows Vista Ultimate machine and the other two are Linux. Everything works fine and always has worked fine until yesterday. On one of Windows 7 machines I can copy a very large file from the machine onto other machines and get 27 Mb/s transfer speed. On the other hand, transferring a file from any other machine (Windows 7, Vista, Linux) on to this "broken" computer I only get up to 10 Kb/s.
So, for example, transferring a 500 mb .avi file onto the broken machine will show as requiring 3 days to complete. Here is the perplexing thing... running Fedora 14 in a virtualbox (with a bridged network adapter) on this broken computer allows me to transfer a file onto this broken machine at normal speeds. So, the exact same 500 MB .avi file that Windows 7 says will take 3 days to transfer will completely transfer over the same network with the same hardware onto the same machine within seconds.
Also, this machine dual boots into Linux and everything works fine under Linux... I tried updating the driver with Hardware Manager in Windows 7... but it says that I already have the latest driver. I don't know where to start with troubleshooting this as it seems pretty obvious that it is something wrong at the level of Windows 7 on this machine and I do not have this problem at all on other machines.
I have a Windows 7 64-bit Professional machine connected to the internet through a Netgear N300 Router. I also have a small Linux based camera that does Ethernet over USB. When I plug in the Linux device to the Windows 7 machine, it takes about 50-60 seconds to obtain an IP Address on the 10.XXX.00.X network from Windows. In Windows XP with the same configuration, the IP Address is obtained almost immediatelyAfter the minute of waiting, everything is fine. I can ping and otherwise use the connected Linux device anyway I want.
Why does it take so long to obtain an IP Address for the device under Windows 7 and how can I troubleshoot or fix this? Is there some sort of priority setting neededNOTE:sing Microsoft Network Monitor when I plug in my device I immediately receive the following:[CODE]
i been using my router for network sharing but its limited to 100mbit, so i want to take advantage of my giglan's on either setups. i went and bought a cat5e crossover cable today, but i am doing my head in trying to get the setup working.
network & sharing centre shows the internet connection on port 1 (modem router) with home group joined but port 2 (crossover cable) is showing up as unidentified network.
i only want the crossover cable to share the network not the internet, so no ICS. just plain old file transferring is what im after but with gigalan speeds. im running x64 7600 on both pc's, my main rig is in my specs and the other is my spare parts (e8400,xfx 790i ultra ect) that i whacked together as a HTPC.
so is there a way to use ethernet for plain file sharing and not ICS?
p.s. sorry if this has been posted b4 but my bandwidth is over and am down to 7kbps so its very painful loading a single webpage.
When I delete a file in a directory, of any extension, it takes about ten minutes or more to ask if I wish to delete this file.When I delete a working file from within a program, say Excel 2007, the screen presents a transparent whiteout and the program hangs. Some times Windows ask if I wish to terminate the program or wait for the program to execute. Again, if I wait, it takes about ten minutes.
I've just installed Win 7 Home premium in my PC. OS on SSD and attached a 1TB WD hdisk for storage. File access, eg .. transfer, copy, delete to and from the hdisk etc... are really very slow. My previous PC running on XP no such problem. However,there is no such issue with the SSD. I'm very new to Win 7.
i have bought a notebook with vista 32 bit home basic and didnt like vista so i upgraded it to windows 7 64bit after 1 day usage. Generally i found new os fine but i have a problem with file copying from my desktop (running xp sp3). My transfer speed is only 1.5 mbyte per second. Notebook has atheros 5007eg (54mbit) wireless lan and desktop has realtek gigabit lan. And my router is airties rt-205 with 125mbit wireless signal. I have done the following things but it's still same.
*netsh int tcp set global autotuninglevel=disable. *Turn off Remote Differential Compression. *Disabled Remote Assistance. *Unchecked ipv6.
Recently my compaq presario CQ56 has been running alot slower than usual, I have scanned with Spybot SnD, ESET and Free Malwarebytes, none of them found any viruses. I have a lower spec computer and it is faster on the same internet connection so I know it isnt the connection. This has only been happening for a week, I havent downloaded anything in that time.
I have a Dell XPS 15Z with gigabit ethernet port, have dgs 1005d gigabit switch and WDTV live hub also with gigabit "capability"... The network cables should be fine...
The issue is that the file transfer (these are usually HD movies) from my laptop to WDTV are rather slow having in mind it's a gigabit network connection... The speed tops 15 MB/s. Same thing if I connect WDTV directly with my laptop.
The switch indicates (green light) it has set-up a gigabit connection both with WDTV and my laptop.
I have disabled autotuning, RDC, AV software etc. Tried with jumbo frames, disabling flow control - EVERYTHING
issue: file transfer from/to xp from my laptop very slow while PC is turned off. as soon as i turn pc on all gets good. this looks really weird to me, all of these 3 are connected with cable not wireless, i also have tried changing the port of the laptop cable on the router but didnt change anything.
I'm connected to my work network using a PPTP VPN connection. The browsing of files on the remote server is extremely slow in Windows 7. I have another computer that has Windows XP on it, and there it's fast as always.Local network file browsing works fine.
I'm moving from an XP machine to a Windows 7 machine and have transferred my project files (engraving files as well as .bmp). When I try to open a project folder in any of the programs I use it takes 2-3 minutes for it to load all the filesThere are just over 10,000 files in the folder, they are all small files (nothing larger than 100k), and on the XP machine it loads in an instant.I have done everything I can find online (turned off indexing, changed the folder prefs, etc) and nothing works. When I open the folder within Windows it loads in an instant, however when I try to open it within a program is when it dragsDoes anybody have any ideas of what else I can try outside of threatening the computer with physical violence?Also as you can tell by my screen name I'm a mac user that has to use PCs at work.
My ISP is Orange FR and until a recent shut down of internet activity whilst Orange were performing repairs to the system, gmail worked well in Windows Live Mail.Now I can't get it to send or receive emails in Live MailMy OS is windows 7 and I have 4 accounts in my windows live mail set up, one being the main ISP of Orange
How to prevent my Windows Live Mail in which I have two email accounts, receiving triplicate e-mails. In particular from Geocaching. I get one in one account, but two in the other, thus three in a row in my inbox! Its most infuriating as I have to delete two each time.
I have two email accounts. One is MSN and the other is Verizon. I view both on emails on Windows Live Mail or on my MSN account. I get the emails OK, but on my Verizon emails I received the email messages on both my Verizon address and my MSN address. I do not want my Verizon emails to come to my MSN address. I am using Windows 7.
I started getting a popup on my desktop yesterday saying my windows installation is invalid, with a link (which I have not clicked) to resolve the problem. I have not upgraded or replaced anything, the only oddity in the last few months is windows update would not install some patches, they successfully installed earlier this week.I purchased W7 x64 ultimate from the microsoft employee store in 2011, it is the version I am running. It was installed, registered, validated. When I checked on the microsoft site last night if it was valid, it forwarded me to a purchase windows page and wanted $199.99 for me to buy a license.
I recently set up Win Live Mail, after buildiing a new computer with Win 7 on it. I use Comcast as my mail client and with xp never had any issues. I set up Live w/ Comcast and all SEEMED well. Today I am away so I used my laptop to log into comcast.net and have 144 new messages, some dating back to two weeks ago. Some of these messages I have received in Live, read and deleted but most haven't made it to Live. Any ideas?
I have an odd problem with Windows Live Mail. As soon as I installed it, I unchecked the following options under Options -> General:Check for new messages every ... (30 minutes) and Send and receive messages at startup. So these options now DO NOT have the check mark next to them.Despite this, my Windows Live Mail checks for new email messages on all accounts (both for my ISP, my hosting as well as on Gmail accounts) every 30 minutes or perhaps every 1 hour and downloads any new email messages, even when I don't tell it to do so. I am not sure about the exact time period but it certainly checks for new emails even when I don't tell it to do so. If I leave the computer overnight I always find new emails downloaded by tomorrow morning.
I have recently bought a new pci wifi lan card (Ralink rt61 turbo) and have plugged in and installed drivers. Initially the drivers the company I bought it from told me to install didn't work, but after some googling found the correct drivers and downloaded from Ralinks website. However these didn't work either.
When using the Ralink wireless utility it says that the card is disconnected, however in device manage it is both connect and the correct drivers installed and everything is perfectly fine.
I ignored the wireless utility and hoped that windows 7 would still be able to use the wireless card as past experiences have shown to be true. This case however I get nothing. Windows 7 says that the wireless card is experiencing problems, it doesn't show any of the routers that should be shown.
So my friend just came over to my house today to use his fancy totally brand new MSI GE60 that he got from Newegg. This was the first time he was using his brand new laptop with a wireless network, and I need to specify that nobody else who has ever visited my house before has had problems with my Wireless network, including this very same friend, back when he was using his old laptop.So we tried re-entering the caps-sensitive 15-character-long password several times and we still managed to get the same problems--the computer constantly switches every 2-3 seconds between being disconnected, having limited access, and being connected to the router but still being unable to access the internet.
His installation of Windows came with a program made by Intel, the guys who make his wireless card, that allowed him to run diagnostics, and it claimed that his ipv6 was not receiving an IP address from my router. We've tried disabling and re-enabling his wireless adapter several times and we've tried restarting my house's router twice...everyone else in my house can connect totally fine, but he is still having these strange issues.So I downloaded Connectify and set up a network on my laptop and had him connect to it--and it worked just fine.Everything is set to DHCP and we even went through each and every single settings panel of all of MY laptop's wireless stuff and just copied it down onto his computer--it's just not working. We tried rolling back the drivers and disabling all of his firewalls/security applications, and it didn't work.
I have an Asus laptop with Windows 7 Home Premium. Last night it started having a problem where it cannot boot and gives the following error on a blue screen:"STOP: c0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem."I've found some threads linking this error to AVG, so I've already followed these directions:url...However, I'm still unable to start the computer without receiving this error.The computer has also attempted to run "Startup Repair" but it just says it "cannot repair this computer automatically."
Having recently installed an update to my Norton Security package I can no longer access the internet from one computer but can receive and sent emails via outlook. We have several laptops that all work ok and can access the internet. It is the host computer that has the problems.
This is what my system is set up like!
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersSteve>ipconfig/all
I am attempting to test deploy a Windows 7 image to a VMusing VMware Workstation. I have Windows Server 2008 R2 installed as a DomainController with WDS. All network services, such as AD, DHCP and DNS have beeninstalled and configured as well. Both the install.wim and boot.wim files are stored on a separate drive (E)on theWDS server. My problem iswhen I try to PXE-boot the VM to send the image, I get the following error message: CLIENT MAC ADDRESS 00 0C 29 64 E4 5A GUID: 564D90FE-71D7-4F36-3893-38ACA864E45A PXE-E53: No boot filename received PXE-M0F: Exiting Intel PXE ROM. Operating System not found
A quick hunch would leave me to believe that both image files werent stored onthe server, but I double checked and both files were present. I have the network adapter on the serverconfigured with a static IP address (192.168.1.10), as well as DHCP configuredwith a 10 IP address range. (192.168.1.11-192.168.1.20). Ive heard that WDS shouldnt be on the same DC as DHCP and DNS. Does this really matter? Ive checked all of my configurations.
For the past few days now, I have been receiving blue screens (my computer would have restarted by the time I wake up).each time, the caused of the error reports has been "ntoskrnl.exe".
I have installed MS Office 2010 on a new windows 7 laptop and set up outlook using the same info as on my old xp pc, I seem to be able to send emails but am not receiving them. I have also set up outlook connector for my hotmail account and this is working fine.
I have a toshiba hard drive in my laptop that Windows 7 says "Windows detected a hard disk problem." I've backed up my personal files, and now I'm trying to figure out if it can be repaired or if I'm going to have to buy a new hard drive. I tried to run the Toshiba hard drive diagnostic, but the tool isn't allowing me to select my drive and can't run without being able to do that, even though it is my only hard drive. I've checked for viruses and malware, and it says there are none. I've defraged as well
