What I wanna know is the best way to format my HP G60 (Win 7 Home Premium) to remove all the extraneous programs like HP Dashboard, etc, and get it running at its peak again. I'm currently working at my school in our "Connection Assistance Room", but that's mostly configuring WiFi, etc. I don't have any experience in formatting.
View 1 RepliesI am giving Fedora (Ext4) the boot from my 150G VelociRaptor and replacing it with Windows 7.What is the difference between a 'Quick' format and a 'Full' format. Does a quick format simply rewrite the FAT and a full format write 0's to the sectors? The reason I ask, is that I am concerned that the Linux Ext4 formatting may leave artifacts which I can do without. So, bite the bullet and go the long route, have lunch and a nap or take the quick way out?
View 7 Replies View RelatedI just bought a new WD 2TB ext. HD.Scanned for bad sectors (COMPUTER - PROPERTIES - TOOL - CHECK NOW): took me about 6hr, then I quick format it (of course very fast). Should I need to do normal format?In this case since I already scanned the HD, no need to do full format.
View 1 Replies View Relatedthe thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
View 8 Replies View RelatedWhat happens if you secure erase ssd to remove all data but dont quick format before installing widows 7 ? Will widows 7 format the drive during installation ?
View 3 Replies View RelatedI'm sure i dont got any bad sectors, therefor is "clean" not "clean all" sufficient? with a quick format, to delete any malware/virus etc?... like a mbr virus..?
View 4 Replies View RelatedIf I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.
View 2 Replies View RelatedWindows 7 cannot format memory card message appear window was unable to format
View 1 Replies View RelatedCan I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 Replies View RelatedI have a few questions and one of them is, what is the difference between an unconditional format and a diskpart's Clean All in the command prompt. When I read their definitions online I don't know what they differ in.
View 9 Replies View RelatedMy drive passed SMART extended self test that scans the entire disk surface. Is the full format with command FORMAT FS=NTFS overkill?
View 4 Replies View RelatedI'm used to chrome, shortcut Ctrl t = new tab. Windows Explorer internet options says Ctrl q for a new tab. It does not work for me.
View 1 Replies View Relatedi've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.
View 9 Replies View Relatedhow i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
View 1 Replies View RelatedI had read in one or another Win 7 forum how to activate quick launch. Now something has happened and I no longer have it.
View 1 Replies View RelatedI want to add My Docs to the Quick Launch bar but it refuses to go. I only get the option to add to Windows Explorer which I don't want. I'd like to see my customised containing folder on the Quick Launch instead of the basic brown folder.
I've tried a few of the options suggested elsewhere in the Forum but they didn't work as I'd like.
I have added the quick launch to the taskbar on 1 pc but on the second one when I click on toolbars - new toolbar it opens with Libraries showing and I cannot get rid of it to insert the text for the quick launch bar. Does anyone know how to get it to open without the libraries bar showing?
View 2 Replies View RelatedThe HP buttons on laptops above the keyboard, for me play, ffw, rewind, volume, and mute; do not work with Windows 7.
I went to HP and downloaded the Vista 32 bit drivers hoping they would work on Windows 7 but they dont, at least not by simply installing them.
Im running Windows 7 32bit.
Im not talking about the Quick Play buttons, I dont care about those.
Any ideas?
This is my second day with Windows 7 and I'm very impressed with it. With Vista, I had the 'My ISP' icon in the Quick Launch bar which was very handy. Now that I've managed to enable the Windows 7 Quick Launch, can anyone tell me how to put the My ISP icon there so that I can connect with just one click as with Vista?
View 5 Replies View RelatedIm looking at just testing out how a VPN works, a quick overview is i have a vista laptop and a windows 7 desktop along with a billion 7800n router. Both the laptop and desktop have static lan ip address asaigned to them. I would like to dial into my desktop machine from my laptop.I have setup my desktop to recieve in coming connections but when i am setting up the laptop to allow outgoing connections im a little bit unsure on one aspect. When it asks for the internet address i want to connect to which is my desktop machine, do i have to type in the lan address of that machine or do i have to put in the wan address?
View 3 Replies View RelatedI have my Realtek Audio device connected to my home theater receiver through s/pdf and to my monitor through the green jack on the back of the pc.
When I am surfing the forums or what not, I have sound set to analog through my monitor. When I switch to Media Center, My output is moved to the s/pdf by right clicking the little speaker and selecting playback devices, and changng my default device, then starting Media Center.
However, sometimes. I forget to do this and I have to close Media Center and make the switch.
Question is this. Is there a hot key or software appy that can do this for me when I launch Media Center? Perhaps a Batch file, witch I have no experience with.?
i have Verizon internet service and i have a new wireless computer. i want to get on lin with the wireless computer.
View 2 Replies View RelatedI had wireless fios connection, but have a new computer and need set up?
View 1 Replies View RelatedI, like many, many people here have experienced this error message coming up on the bottom right of the screen.There are many closed topics on this with some very long-winded answers and a lot of confusion.Try reactivating your copy of Windows 7 first by doing the following (It worked for me without even needing a reboot!)Open your "Start" button.type or copy and paste this slui.exe When you see it as an option to click, right click and run as administrator.Came up for me as "Activation complete" straightaway.Not suggesting this is an alternative for the larger threads but definately something to try before you go too deep (or in my case out of my depth lol)
View 1 Replies View RelatedThe icons in the quick-launch bar (or whatever it's called now, since it works differently after all) frequently change image. For the first few days it was all normal, then the WMP and IE(32-bit) icons swapped image, and now the WMP image has turned into my C drive's image (and IE(32-bit)'s back to normal. The 64-bit icon hasn't changed yet, by the way). They still work normally though. How to stop them from switching image?Interestingly, this also happened on Windows XP (which was 32-bit, not the 64-bit unlike this Windows 7). However, this is a different HD, so it's definitely not a HD issue (well, unless both happen to have the same problem, but what's the chance?).
View 3 Replies View RelatedI have just received a new computer running 7 home edition, occasionally I get a blue screen stop error but have no chance to read it before the system reboots. How do I keep the blue screen on screen to read it?
View 4 Replies View Relatedi have problem with quick launch keep disappearing after every reboot
and i have to unlock toolbar and click on new toolbar and choose quick launch folder and customize it and so.
Windows 7-HPx64 offers easy changes from small to large icons in the Taskbar but QL icons seem to have one size only - small.In trying to set up / maintain Windows 7 for an older person I want to offer her a QL with large icons, just like the Taskbar.Do I ditch the QL and just pin apps to the Taskbar?
View 1 Replies View RelatedI still use the quick launch bar in Win 7 and I'm wondering something: is there a way to make a folder on that bar appear as a pull-down (or, pull-up) menu?I mean similar to the way Chrome allows you to make a folder on your bookmarks bar, in that clicking it brings a pull-down list of those bookmarksSo in this case, I'd like to click a "games" folder on my quick launch bar, and have it open a menu similarly, rather than just open a folder of links.
View 1 Replies View RelatedI added a Quick Launch toolbar to my taskbar on my desktop. It works fine.
I added a Quick Launch toolbar to my netbook and it works fine but it goes away every time I shut the computer down.
I've tried everything I can think of. Any suggestions?
I have driver problem with Win 7 and HP NX6310 WI FI do not work. I can not use the button to activate the wi fi while HP drivers for quick launch button are for Vista and do not work.
View 4 Replies View Related