I would like to put a bootable (obviously) Windows 7 ISO file to a flash drive and have the my netbook boot the the Windows 7 flash drive. I tried the software that MS released, but I didn't have any luck with it. It tells me that it isn't a valid ISO file.
Is there any software that can do something like this?
I need to add an .iso file for Windows 7 onto a flash drive so I can install it on a netbook. I tried formatting it with PetoUSB, but it gave me an error of the partition being in FAT32 instead of FAT. How do I change this?
View 6 Replies View RelatedWhen I try to burn a file on my USB flash drive, it says the media file should be empty, even though the USB flash drive is brand new and there are no files on it.
View 1 Replies View RelatedMy computer is running Windows 7 professional. It is a fresh install. I have a blu ray drive installed (LG BH12ls38) that works fine. However, when I put my computer to sleep and wake it back up, the drive is gone. When I go to device manager and try to scan for hardware changes it still doesn't recognize it. The only way to solve the problem is to shut down the computer. Restarting the computer doesn't work. If I restart, the computer stays on the motherboards screen for a longer period of time then it normally does (about 30 seconds). Also, it seems that this drive is affecting the computer when I shut it down. After having this problem of not being able to find the drive it seems my computer takes longer to shut down.
I have installed all necessary updates for Windows and the driver is provided by Microsoft driver version - 6.1.7601.17514 and date is 6/21/2006. I called LG and they have not been able to find a solution. It seems they do not provide/have a driver and rely on microsoft's drivers. I also updated my BIOS to the newest version. I went to my local store and tried another LG drive which was older and not blu ray and it worked fine so it's not a motherboard or power issue. My computer is running in IDE mode. The reason I state that is because I saw some posts about people switching from IDE to AHCI mode. However, I talked to the technician at my local microcenter and he said this wouldn't be the issue. Sounds to me like firmware issue?
I recently turned my usb into bootable usb in order to run chrome os,everything was ok untill i needed my usb to transfer some files so when i plugged it in while running windows 7 a box popped up to format it i clicked ok,then i noticed the usb from 8 giga showed up as 1 giga in my computer.I opened disk management and saw that it was cutted down in many partitions, i deleted some of them so i would expand it in one partition,at that point my trouble began,the expand option was greyed out,i tried diskpart and delete the partitions there.After that the drive lost its assign letter and showed up as one partition in disk management but in my computer it was invisible,i tried other guides that use diskpart and i download some programs to fix this with no luck.when i tried to format or assign letter from disk management i get this message "the system cannot find the file specified usb format".I tried to plug the usb in my roomates laptop with the same resaults so i dont think its my drivers or laptop problem.
View 2 Replies View RelatedI'll warn up front that this is a duplicate of another forum entry, but although that other entry is now closed, the solution was never postedI recently turned my 8GB Sandisk usb into bootable usb in order to run chrome os,everything was ok untill i needed my usb to transfer some files so when i plugged it in while running windows 7 a box popped up to format it i clicked ok,then i noticed the usb from 8 GB showed up as 1 GB in my computer.I opened disk management and saw that it was cut into many partitions, i deleted some of them so i would expand it in one partition,at that point my trouble began,the expand option was greyed out,i tried diskpart and delete the partitions there.After that the drive lost its assign letter and showed up as one partition in disk management but in my computer it was invisible,i tried other guides that use diskpart.when i try to format or assign letter from disk management i get this message "the system cannot find the file specified usb format".
View 1 Replies View RelatedHow can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
How to save a file from online flash player [URL]
View 1 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI have Windows 7.i copy entire flash drive to a folder (Call it "RemovableDrive" folder under My Document) from flash drive (USB).In "RemovableDrive", folder, I right click and select Properties, then I uncheck READ ONLY, and select Apply to set all files and folder/subfolders to uncheck READ ONLY.
In the "RemovableDrive" folder, I opened a file, and edit it. Then I try to save it.it would not let me. I also set the property of the file to READ ONLY, but still has the same problem.
I recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies View RelatedI have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies View RelatedDownloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
View 3 Replies View RelatedI just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
View 14 Replies View RelatedI unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
View 1 Replies View RelatedI tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
View 7 Replies View Relatedi have a question looking for the best light Win7 version and if there is chance someone to explain me how to boot it on my USB flash drive.
View 2 Replies View RelatedHow do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
View 9 Replies View RelatedIs there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
View 1 Replies View RelatedIf I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
View 4 Replies View Relatedabout my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
View 2 Replies View RelatedI know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
View 1 Replies View RelatedI have never needed to do this before, so I have no knowledge on the subject. I have a user who will be taking data home once a week, so I want to encrypt or at least password-protect her flash drive. It will contain regular, typical Office documents.Now, the tricky part is, she has a Dell PC running Windows 7 Pro in the office, and a Macbook laptop at home (not running any version of Windows). Does something exist, especially free, that will allow me protect her flash drive, and make it accessible to her on either computer?I need to do this for now, temporarily. I'm trying to convince my CEO that DropBox and others are just as safe and roughly the same process....but for now, I have to make the flash drive work.
View 4 Replies View RelatedI installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
View 1 Replies View Relatedexplicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
View 6 Replies View RelatedHave a Sandisk 32 GB USB Flash Drive that I use for selective storage of certain files.If I purchase a Sandisk 64 GB to make a complete backup will I have to configure each one every time I swop usage.Why I ask this is that when I tried to introduce the new Sandisk to my laptop it could not be recognised as my computer was still configured to my old Verbatim 4 GB USB.
View 4 Replies View RelatedI have a 8 GB USB Flash Drive which shows up as "Disk 1" in Disk Management but never comes "Online". I tried changing the drive letter and double-clicking in Explorer. But it says "Please insert a disk into Remove Disk (I". When I try to format, it says "There is no disk in drive I:. Please insert a disk and try again."I tried HP USB Disk Storage Format Tool but it says "There is no media in the specified device."
View 7 Replies View RelatedI have had 1000 issues, but i'm going to try and narrow it down. it seems like everytime I try to fix a computer, nothing ever just does what it is supposed to.At the moment I created a boot drive out of my flash drive with windows 7. I set it to boot first on my bios and it loads but hangs up on the first background screen after the windows logo and nothing happens.This info may help. I have two hard drives plugged in (IDE). the master is the one I want to do a clean install of windows. The slave drive already has windows and if I boot from it I can get to the desktop, but the problem is when I try to run the install from it and the computer restarts after the second step in the install for the main HD, it doesn't try to continue the install. Ive been working on this for a week.
View 2 Replies View Related