Possible To Install Mac OS Lion On Windows 7 Machine?
Mar 4, 2012
Can I install mac os lion on windows 7 machine. What are the system requirement for mac os lion. I have intel dual core (2.5ghz) processor, 2 gb ram, 320 hard disk. And if I fulfill the requirement of mac os lion then how do I install it.
View 1 Replies
ADVERTISEMENT
Jul 27, 2012
I would like to know if there is a way to reformat a PC from Windows 7 OS to the new Apple Mountain Lion OS?
View 4 Replies
View Related
Dec 17, 2012
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies
View Related
Aug 28, 2011
I have been trying to install OSX Lion on VMware with the help of [Working Method] Install Mac 10.7 Lion on VMware - Windows 7 Intel PC The installer gets stucked at Boot screen, and OSX logo automatically changes to grey color no-entry sign.What should i do..?
View 1 Replies
View Related
Jan 10, 2012
seen this (item number 140663914284) heatsink for �19 for my AMD Phenom X4 9850 Black Edition. the heatsink is old?
View 5 Replies
View Related
Oct 15, 2011
atm i dual boot XP and windows 7 Ultimate (full retail, not OEM). i want to remove 7 from my machine so i can install it on a new machine. have read various posts how to do that, but the posts are all old and a bit of messing about involved. i dont want to mess up so what i wondered was if i used windows 7 manager to change 1st boot option to XP, then formatted the partition (same hdd as XP) that has 7 on it, would that save all the messing about trying to repair boot failures in XP and the boot option screen, making XP boot correctly? i could then format the old partition where 7 was afterwards.
View 4 Replies
View Related
Feb 6, 2012
Back in October my wife's machine had a malware infecion (http://www.bleepingcomputer.com/forums/topic423457.html). After much work by Gringo and me, the machine was declared clean. However, even at that time the Service Pack install would not complete. It would churn and try to install and reboot and certainly act like all was well and completing, but eventually it would say something like "Service Pack failed. Resorting to previous cnfiguration". With the holidays approaching, solving this issue was pushed to the back burner. Now that I have some time, I'd like to get the machine fully updated.
View 2 Replies
View Related
Sep 1, 2011
When I bought my Maingear machine, It came with an OEM copy of Windows 7 Professional. I have an old Dell in the other room I'd like to run Windows on. Can I use the disc that came with my Maingear machine to install Windows on the Dell? If I need to re-install Windows on the Maingear at some point, is that license going to work on the re-install or are these licenses a one time/one machine type thing?
View 4 Replies
View Related
Oct 18, 2011
When i put a Windows 7 installation Cd in my Hp laptop,the notice i get is Hard drive not found
View 1 Replies
View Related
May 1, 2012
Can i install Windows 7 on Xeon 2.66 machine?
View 2 Replies
View Related
May 3, 2011
On Friday I attempted to install windows 7 ultimate x64 My existing machine is a XP Pro SP3 machine and it meets the system requirements as per Windows 7 upgrade advisor I booted from DVD and followed the steps up to selecting where to installl windows 7
This list showed me
Disk 0 Partition 1
Disk 1 Partition 1
Disk 1 Partition 2
Disk 0 is my C drive where my windows xp is installed - 300GB disk Disk 1 is where is store my files: pictures, music, documents etc - 500GB disk Partition 2 of Disk 1 is unallocated 9GB I selected Disk 0 Partition 1 Then selected Disk Options Format Drive Clicked Ok to the message about destroying data And allowed the install to proceed What i intended / expected to happen was that windows 7 ultimate would be installed on drive C: (Disk 0) and that drive D: (Disk 1) would remain intact and untouched by the process The Windows 7 install completed successfully I logged on to my user account, activated my windows 7 copy I then looked at my disks and what i see is that: Drive C was formatted and windows 7 was installed there BUT The install process formatted drive D and copied the windows XP installation to that drive So i have lost a lot of data that i did not expect to, and, of course, had not backed up in ages. For now, anyway, thats beside the point.I then removed the windows 7 DVD from the drive and rebooted the PC When the disk was removed the machine booted to Windows XP - running from the copy taken earlier on Drive D However, when i replaced the DVD to try to boot to windows 7 again, it began the installation process from the start?I dont remember selecting a dual boot option during the initial install, but maybe the steps i took led me to something like that by some default?
View 9 Replies
View Related
Feb 15, 2012
For some reason, I cannot install Windows 7 onto this new gateway PC that I have, but am able to do it on my older PC. Both are capable of running 64 bit, both have new and working memory, hardware. Now I understand that when you do install windows for the first time, your hard drive "marries" your motherboard. Thus when I put the hard drive into the new machine after a fresh install, it gets stuck on "windows is starting" and refuses to boot (ClassPNP.SYS in safe mode).
View 3 Replies
View Related
Apr 12, 2011
I have Windows 7 x64 Ultimate.Loaded numerous x64 apps including Office 2010 x64......but had to uninstall Office x64 in order to load another app that requires Office 2010 x86.Uninstall of Office 2010 x64 seemed OK but on reinstallation (using Office 2010 x86) it refuses to load on an x64 system.How can I get x86 to install? Can't find a WOW64 key in the registry.
View 5 Replies
View Related
Apr 29, 2012
I needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
View 3 Replies
View Related
Jan 11, 2013
I currently have vista 32 and ordered a full version of windows 7 professional sp1 64-bit. The disk that came in the mail says "Reinstallation dvd windows 7 professional sp1 64 bit". Will this Reinstallation DVD allow me to do a clean install of windows 7 64-bit on my computer?
View 1 Replies
View Related
Nov 16, 2011
I am getting ready to put a clean windows 7 op sys on my dell machine. I wanna make sure I have all necessary drivers I need. Is there a quick way to do this? Or do I go in device manager and get driver and go to manufacture website to get updated drivers for windows 7 one by one?
View 1 Replies
View Related
Nov 16, 2011
i am getting ready to put a clean windows7 op sys on my dell machine. i wanna make sure i have all necessary drivers i need. is there a quick way to do this? OR do i go in device manager and get driver and go to manufact website to get updated drivers for windows7 one by one?
View 2 Replies
View Related
Jan 4, 2012
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies
View Related
Jun 2, 2012
install a bt paperjet 50e fax machine
View 1 Replies
View Related
Sep 22, 2010
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies
View Related
Dec 28, 2011
I'm about to try and get a hackintosh running. And this needs to be OSX Lion since my graphics card is not supported in Leopard Snow. Problem is, to my knowledge, Lion is only installable from within OSX Leopard Snow. But since I can't run Leopard Snow, I'm sort of stuck.
My question is, would it be possible to install an operating system on a HDD from within a virtual machine? Such as VMware or virtualbox. Because then I'd be able to push the OS into the harddrive and then just boot of the harddrive?
View 2 Replies
View Related
Jan 20, 2011
I purchased a new computer with Windows 7 Professional 64 bit. I read that it's recommended re-installs the operating system after receiving a new computer from the factory.
View 9 Replies
View Related
Apr 13, 2012
I have had Adobe Premiere Pro CS4 and Adobe After Effects CS4 in the past, but recently upgraded last year both to CS5. I have no problem running AE CS5, but PP CS5 is giving me problems when trying to add transitions. Something about it can't add until I remove some parts of the footage from the A-B roll for I had no handles, which means removing some delicate footage. It will either add at the beginning or the end, but not in between like I need it too. I don't like the new way, so I removed both of them. Really, I had no choice since I had to do a clean install of Windows 7 Ultimate x64.
What I want to know is, can I install both CS4 and CS5 onto the same machine? I know it want take trying to install onto the same drive, I believe; but can it be done by installing CS5 onto the main master hard drive and the CS4 onto a secondary slave hard drive (or vice versa)?
I just want to compare the two to find out why they are so different. Also, my Red Giant Suites, NewBlue FX and Pixelan SpiceMaster Pro, etc. plug-ins don't show up in PP CS5, but they work fine in PP CS4.
As far as the plug-ins, would they be installed into the Common folder rather than the application plug-ins folder?
View 6 Replies
View Related
Feb 26, 2012
I had originally installed Window 7 and have been running it with no problems at all. I thought some experience with Ubuntu would be advantageous to my overall computer knowledge and as a result attempted to install Ubuntu. The install process went horribly wrong and as a result my machine will not even let me load Windows 7 from the installation disk. It goes to the black screen where the Windows is loading files and upon completion the cloudy Windows stock image comes up with the mouse pointer and does nothing further. I have the hard drive hooked up in an alternate machine in preparation for data recovery but before I proceed into these untested waters I thought I should get some advice. I have posted problems on this site before and received invaluable advice.
View 3 Replies
View Related
Jan 30, 2012
I have an old machine running Windows 2000 professional which I use as a printer server for a peer to peer network. My XP machine can see the computer and has the printer installed with no issues.Initially my Windows 7 (Home Premium) machine could detect but not access the 2000 machine. I found the fix (creating/setting the LmCompatibilityLevel key to a Dword of 1) and now I can sign on to the 2000 and access its files. (I ran the refreshpolicies commands on the 2000 also).When I try to instal the printer as a local printer it appears to instal. The existing driver is recommended (and accepted). When I print the test page it does not print. On the windows 7 the print queue eventually shows the page as having an error, while the print queue on the windows 2000 machine is empty throughout
View 1 Replies
View Related
Sep 23, 2011
I have a laptop running licensed Windows 7 Pro 64bit (sticker on the bottom for same version with key etc.). I would like to reinstall the OS but have only Windows 7 Pro 64bit upgrade media from another PC. Can I just use that Upgrade Win7Pro64 DVD to reinstall OS on laptop (using that key from laptop..)? AFAIK it doesn't matter what Windows 7 DVD to use (except Home editions), OS will determine what it is meant for by S/N, right?
View 6 Replies
View Related
Jul 25, 2011
unable to install windows vista as a virtual machine as it says its not compatible with my laptop which is 64 bit so should be.I get an error saying that something ive recently installed needs to be removed. The only thing i could think of was VMware which i have got rid off
View 1 Replies
View Related
Feb 20, 2012
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies
View Related
Feb 6, 2011
ive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
View 4 Replies
View Related
Jan 23, 2012
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies
View Related
Jul 31, 2009
I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
View 9 Replies
View Related