Transferring Fresh Install Windows 7 HDD To Another Machine?
Feb 15, 2012
For some reason, I cannot install Windows 7 onto this new gateway PC that I have, but am able to do it on my older PC. Both are capable of running 64 bit, both have new and working memory, hardware. Now I understand that when you do install windows for the first time, your hard drive "marries" your motherboard. Thus when I put the hard drive into the new machine after a fresh install, it gets stuck on "windows is starting" and refuses to boot (ClassPNP.SYS in safe mode).
I needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
I recently got a new PC and transfered all my old settings/documents to the new machine. First off, thats an awesome feature I wasnt even aware of! However, Im concerned about one thing; on my old PC, my wife used to have a profile that she used for work and had some confidential financial documents on. She deleted her profile some time ago when she got her own PC, but could it possbily have transfered her old/deleted documents onto my new machine? I only ask because I mainly use my new PC for work/presentations (in public places). While its unlikely, I just wanted to make sure no one would have access to those old documents should they gain access to my new machine.
I have window 7 home on my machine. I had a version of simply accounting that did not run on windows 7 so I install it on a vitual machine on windows 7. I have since bought a version that will run on windows 7 because I had some errors with my vitual machine witch will not run anymore. How do I get the data from the vitual machine. If I try to get it with windows explorer of windows 7 it does not see it.
I have a very close friend who is having pc issues, is short on cash, and needs her pc for work. Where she lives (Russia) PCs are insanely expensive and there really are not any decent ones available. I offered to build her a new PC from scratch to cut down on cost, but the cost of a new windows install is prohibitive. She already has a valid windows 7 home premium license with her old PC, and the old PC will be going in the trash after proper cleanup, or possibly being reused with ubantu or something. Either way, the old PC will not be running windows 7 anymore. I figured I could install windows 7 fresh on the new PC and use her old license key to activate it once she gets it. Is there any issue with my logic here?
Here's where things get complicated. There is obviously a lot of distance involved, so I will have to assemble the PC and then mail it to her. She is not PC savvy, so having her do really any of the installation work is out of the question. She needs her old PC to continue functioning, poorly as it may be, right up to the point the new one gets there. Mail takes 3 weeks or so, which means it is absolutely out of the question that I activate the new pc before mailing it, since I assume that would knock the old one offline and she can't be out of work for three weeks, or even 3 days for that matter.
I need the new PC to be as close to ready to go for her as possible on arrival. I would love to be able to install all of the updates, antivirus, core programs she uses for work, etc before mailing it off so that she can just boot it up, call Microsoft and get it authorized, but I am not sure if this is possible. I know you can use a thumb drive with a downloaded official copy of windows 7 for the install, which I already have, so that part is not the real issue. The issue is whether I can load everything up for her prior to sending it off, because if I can't it's a no go for her. She'd rather take credit and pay for an overpriced hunk of junk that wrestle with a windows install. Not rational, I know, but such is life and it is not going to change.
So what I'm really asking, is whether I could use an official copy of windows 7 home premium on a thumb drive, and get the system the whole way up to operational before I register it? If need be I have a disc copy as well. Usually it says you have so many days to register your product, but will it allow me to install the updates etc? I don't want her to have to sit around for a day doing updates and installing programs.
Later today I plan to follow this SSD - Install and transfer the Operating System guide to transfer my Windows 7 32bit operating system from my HDD to a new 60gb SSD.My only concern is that I don't have a windows 7 install disk, are they necessary for this method to work? I rashly purchased a windows 7 64bit upgrade hoping to do a clean install (using one of the work around methods for upgrade as full install) but after a few hours figured out you cannot use the upgrade download to go from 32 to 64bit. As a result I have no disk (old purchase) and the wrong upgrade download.
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
I've just done a clean install on a blank hard drive of windows 7 ultimate x64. I had this exact version of windows on another hard drive but I did something and now I can't boot into it any more. So I want to transfer all my files and stuff - I can link up and view everything on my old hard drive, it just won't boot - is there any software or any easy way to transfer my program files so that I don't have to reinstall them all? Also, I'm not sure how to transfer all my windows settings - is it just a file somewhere that I copy across? I've had a look at 'windows easy transfer' but it looks like it only works if you can boot into both operating systems - which I can't.
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all.. Ive also tried to change my PSU to a different brand, but all volts seems ok. I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
A few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
I installed Windows 7 Home Premium over Vista Business on a PC to see if it would run and tested it out for a few days. I used my installation CD that was good for only one PC. So to activate Win 7 on that 2nd PC I need to buy another copy of the OS. Can I just reinstall over the current version of Windows 7, or so I need to wipe the drive and install fresh?
Is there any way to do a fresh install without a disk that my key is for? I have a pc with no backup copies of Windows 7 Pro OA that came on it. I only have a Windows 7 Home Prem disk that I bought for my laptop. Is there anyway to make it work? Will my Pro OA key from the site of the box work with the Home Prem disk I have? Or is there somewhere at Microsoft that I can download a copy of Pro OA that I have paid for?
I have never purchased a laptop before, only built my own systems at home. Before I make my purchase, I have a couple of questions.
Do most laptops come with an OEM Windows 7 disc? I'd like to be able to do a fresh install and wipe all of the junk that will inevitably be pre-installed on the laptop. I've even heard of junk software that is somehow intertwined with the Windows installation that forces the user to update drivers, etc. only through the software itself; sometimes it doesn't even allow the latest drivers. I'd like to avoid all of this and work with the barest possible system and build it up myself.
If Windows 7 discs sometimes do not come, I'm assuming that I will have a valid OEM serial that is tied to a plain copy of Windows 7 (that is, not riddled with laptop software). Would I be able to download a copy off of Microsoft's site and input that serial when I'm prompted?
I just ordered a P8Z68-V PRO Motherboard w/ Intel Core™ i7-2600K Processor with 2 60GB SSDs (SSD 60G|OCZ SLD3-25SAT3-60G RT). I also have 16GB of RAM (2 X Patriot Viper Xtreme 8GB 2X4GB DDR3 1866MHZ PC3-15000 9-11-9-27 1.65V XMP Ready Desktop Memory Kit)I plan on doing a fresh install of Windows 7 and I need some advice on the best approach. I hear a lot about SSD caching but most of what I read talks about just adding an single SSD to a system that has Windows already running on a spinning disk. If I were to do a fresh install, I would like to make it as fast and stable as possible. The main purpose of this machine if for heavy photoshop and lightroom usage, including filters and image processing. My mobo and processor maybe overkill for these programs but when I spend 10 hours per day in front of the computer, I want it fast! I also wanted the flexibility to move into video editing if I choose. I'm not much of a gamer, so leave that out of the equation for now. I am assuming that both PS and LR will preform better if they are installed on the SSD(s) while the photos themselves are on traditional drives. Here are some of my options:
1. Raid0 - install windows and photo software and over both SSDs. I am assuming the cashing would occur on this drive as well (but I'm not sure how to set it up, or if it happens on default).
2. Raid1 - install windows and photo software on 1 SSD and keep the other as a mirror. I am assuming the cashing would occur on this drive as well (but I'm not sure how). Not sure if the mirror would be a bottleneck.
3. No Raid - install windows and photo software on 1 SSD and use the other for SSD caching.
I am doing a fesh install of Win 7 from a pre-SP1 DVD.The last time I did this, Windows update dowloaded and installed literally hundreds of patches before and after SP1, taking hours.How can skip to SP1 and avoide downloading all of those unnecessary patches?I am installing to SSD, so in additional to saving time, I also want to minize space
Yesterday I attempted to install a few new components in my computer and have been having issues installing windows
New components Asus M5A97 Mobo AMD Phenom X4 965 3.4 Ghtz Samsung 830 128gig SSD
In the system I have my previous working
Samsung DVD drive 500v power supply Radeon HD 6850 graphics card
I do not currently have my 1tb Samsung drive connected I have the SSD hooked up in the first 6b/s SATA port and the DvD drive in port 2.BIOS finds the hard drive and the setting in BIOS are ACHI When I get to the windows setup screen where it asks me to pick the drive to install windows on I choose the SSD which shows 120g unallocated space,At this point I get a Windows cannot create partition error. I have gone into Diskpart and created the partition and set it to active and again tried to reinstall and get the same message?The first is Disk Read Error press cntrl alt del to reset and the second (which I only had happen once) the windows login screen came up, then flashed blue and reset the pc.I built a PC for my brother in law 3 weeks aho using an Asus mobo with the same BIOS screen, that install I had a fresh HDD and a SSD and it allowed me to install windows without a problem to his SSD (again from a burned ISO disk). I did not have to do anything out of the ordinary.
Can I download the iso from digital river and use my new coa on it? I'm trying to install it on a usb using the win 7 usb tol and I can't get it to accept the disk to iso file.
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
