Performance Dropped Gradually After Upgrading To 64bit
Jul 21, 2012
I have recently upgraded my pc to 64-bit and Im having huge fps drops whenever I run the games that I used to play fine in 32-bit (Aion Online and Guild Wars 2). On 32 bit, I was running with 30-35 fps with highest settings, but now I'm running both games with 9-15 fps regardless of the visual settings.
I have tried reinstalling the AMD driver, as well as the chipset drivers using -overall and -overide. I have tried disabling my sound driver, and I still get the same result.
I have tried googling some fixes for my issue, but so far it has been fruitless. Aion has a 64-bit client which they say, would increase the game's performance gradually, but I have yet to try it since it's not working as of the moment.
What I'm concerned about is when I run Guild wars 2 client (just the launcher itself), I am noticing a drop on my computer's fps. I never tried to overclock my cpu nor my gpu since I have an old school mobo.
Here are my specs:
CPU: Intel Core 2 Quad Q8300 2.5 Ghz
MOBO: ECS G31T-M7
RAM: 4GB DDR2 800 (2gb x 2)
HDD: Samsung HD161GJ ATA (150 GB)
GPU: ATI HD 5770
PSU: Raptor R500
I have a Toshiba Satellite A300M00 Notebook and got it about a year ago with Vista Home Premium. I purchased the new Windows 7 Home Premium (Full) and did a clean instal.
Now they issues is this. When i was running windows vista my WEI (windows Experience Index) was at an overall 5.0 (knowing that vista's max is 5.9, my laptop was pretty powerful and ran games and other things beautifully).
So knowing that Windows 7 is supposed to increase computer performance, the opposite has actually happened on my system (both by looking at the WEI which is now 3.8 and the performance itself with games in particular being much slower).
I was wondering why this may be the case, i have installed all driver related to the graphics card which is an ATI Mobility Radeon HD3650 512MB Ram. My CUP is 2.5Ghz Dual core, i have 4GB Ram and a 400GB Harddrive.
The windows experience index is as follows. Processor went from about 5.4 to 3.8, RAM went from 5.0 to 4.0, Graphics stayed about the same at 5.2, gaming performance went from 5.5 to 6.1 and HDD went from about 5.2 to 4.9.
The lowest of those being the Processor is the subscore and not only is this rating system different but the performance is actually worse with games, Far Cry 2 i use to be able to run 1,024 x 768 with 2XAA at Very High Graphics nicely (just as an example).
So my problem is I use to have 5.74GB of ram usable out of 6.00GB. Since a restart of my computer there is now only 1.74GB out of 6.00GB.So I have a 64-bit Windows 7 Home premium SP1.The ram is 1066MHz with 1 x 4GB and 1 X 2GB.I only have 2 slots on the computer.
I've just bought a netbook with windows 7 starter edition its a HP mini 110-3500 which i was assured by the sales assistant has a good processor (intel Atom N550) anyway it seems to be quite slow respinding to commands i.e. opening up explorer etc. My first question is do all netbooks perform like this running windows starter and would upgrading the OS help performance?
Recently, going back over my quasi-gaming rig, I found out that my processor (Intel Pentium Dual-Core E5200) is 64-bit, not 32. I've been running 32-bit Windows 7 ever since I got it. When I bought Windows 7, I did so off of the Microsoft store, so I always have the option to go back into my purchase history and download a new .iso of either the 32- or 64-bit release. I did so, and ran Microsoft's USB/DVD tool for Windows 7 to put it on a USB drive (I didn't have any DVD-R's on hand) and it all seemed to work perfectly fine. But when I try to boot from the USB drive, it goes from the "Windows is loading files" screen to the "Starting Windows" screen, then gives me an unexpected error and forces me to reboot. I already tried redownloading the .iso, in case it was a corrupt download.
I finally got Windows 7 and I was hoping I could finally switch to 64-bit (I took long enough to join the rest of the world) but I am having issues upgrading to it from XP.Now, I do know that I can't directly upgrade from XP to 7 without losing all my junk, I know everything is compatible (ran the Upgrade Advisor thing), and I'm following the process on the official site url...However, I can't seem to get it to boot from the disk. I've changed the boot order to the "DVD/CD" option being first, Hard Disk second and Floppy last but it seemed to just ignore the DVD. After that, I even changed the boot order so it would only try to boot from DVD/CD and set the other two settings to "Nothing" BUT it completely ignored that and somehow just started normally. I even tried opening to Boot Menu as well, going down to the DVD/CD option and pressing enter, but that didn't do anything whatsoever.
I'm planning to replace the 32-bit OS with 64-bit Windows 7 Ultimate. This laptop can support 8GB as mentioned in the catalogue. I guess the processor i5-430M is the first generation processor. I'm getting two 4GB RAM modules fairly cheap with same speed specifi'x.
I've no plans to trade off this laptop because its a rare "breed" - Made in Japan by Fujitsu and after 2 years of service it still runs extremely well.
I know that one copy of windows 7 can only activate one computer. I have two, one already with windows 7 32bit installed and one without windows 7. I plan on buying a new one, installing windows 7 on my second computer and upgrading windows 7 to 64bit on the other. If I upgrade, will windows use the old activation key or require me to enter a new one, because that computer came with windows 7 32bit so I don't have the disc.
I want to upgrade my windows 7 32 bit installation to 64bit so I can add some extra ram to my system, but I was wondering if I do a backup on my 32bit install, format the drive, and then install 64 bit windows 7 and recover from the backup will it work? Can you use a 32 bit backup on a 64 bit machine?
i have brought new desktop and installed windows 7 32 bit and now i would like to install windows 7 64 bit how to do that. is there any other patch should i download... or should i install new operating system itself....
I am wanting to upgrade from Win7 32-bit to Win7 64-bit. I am told this will require a clean re-install of Win7. That isn't a problem in and of itself. My question is what will happen to the other RAID 0 arrays in the box? Since they are "software" RAID 0 arrays that were created by WIn7 32-bit after it was installed will they survive intact when I install a new version of Win7 on the base drive? My base drive is not part of a RAID setup. Will the new Win7 64-bit install recognize the two separate RAID 0 arrays automatically? I hate the idea of having to try to backup a couple of TB of data from the RAID 0 arrays (and then restore it) just to install Win7 64-bit.
The reason on why i want to upgrade from a 32 bit to 64bit is because i have some extra ram that is not being used. Also i want my computer to be a little bit better when playing my games.
Processor : Intel Core 2 Quad CPU Q8200 @ 2.33GHz 2.34 GHz Memory(RAM) : 4.00 GB System type: 32-bit Operating system Graphics : NVIDIA GeForce G100 64-bit capable Yes Model : Aspire M5700
I tried looking online about this I need to know if there's a big difference between 12GB of system memory and 16GB of system memory. I don't play many games but I do convert HD videos a lot and these programs are a pig on ram. I have 8GB now and have ordered 2 4GB sticks and was wondering if I should stay with 2 4GB sticks and 2 2GB sticks(total12GB) or should I upgrade to 16GB.
I am trying to go from 32 bit Vista to 64 bit Windows 7. The 32 bit Vista was installed by mistake. My system can handle a 64 bit OS. Now I have finally found the time to upgrade. But the 64 bit installation DVD can't be read from my OS. I have tried setting up my CMOS so that I can boot from the DVD but I have run into some issues. First of all, when I look at my keyboard during the boot procedure, I noticed that the little light which indicates that one row of buttons are to be used for F1 - F12 keys, the little green led light goes on and off. Sometimes, during the boot process, it is on, sometimes it is off.
The CMOS procedure tells me I can hit F12 and set the boot order. I can hit F12 but when I go into that menu, I notice my keyboard is dead. The CPU does not accept any commands from me. So I need to power off and power on and try again. The CMOS procedure tells me I can hit DEL and that launches the whole CMOS utility. There I can set the boot order so that the DVD is run first. But when I save and exit, I notice my keyboard is dead again. This time, the screen is showing things being set and loaded and I am prompted to hit any key to show I am sure that I want to boot from the DVD.
I hit the Y key and I hit the spacebar, but it becomes clear that my input is ignored since my keyboard is being ignored. And the ol' Vista OS is loaded. Is there any way to set things up in the VISTA OS to force a boot from the DVD? I guess I can load the OS in save mode and format the C drive, but if I do that I might risk having a dead computer since the CMOS does not seem to be trusting enough to boot from the DVD drive even if you tell it to.
Microsoft has this page of links: [URL] And then there is this link: [URL]
And the Notes section specifies that I need boot off the DVD drive: "To install a 64-bit version of Windows 7 on a computer running a 32-bit version of Windows, you'll need to start, or boot, your computer using a 64-bit Windows 7 installation disc or files."
I just preorded the windows 7 upgrade and I'm wondering, is it possible for me to "upgrade" (Clean install) my windows xp 32 bit to 64bit windows 7? I've read the windows 7 FAQ and it said of your upgrading from XP, a clean install is required to upgrade but does the upgrade offer allow for xp 32bit to be upgraded to w7 64bit?
My OS is XP Pro 32-bit. Using Easy Transfer 32-bit saved selected files to external HD. After installing Win 7 64-bit, can I use the resident Easy Transfer to reapply/import the earlier saved files?
I'm about to do a destructive install to Win 7 64bit, to upgrade my existing Win 7 32bit installation. I already have a partition in my hard disk ( K: ) where existing User profiles/data are stored. Luckily there is only my profile and one for a guest user. I've read through some of the Tutorials on this site on how to create new users on a different drive/partition at the point of installing Win 7, and I've read how to change the User Folder Name of a profile.The fear I have is that the newname user in the 64bit will obliterate the oldname at the point of being used for the first time.
I have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?
I am running Windows Vista Home Premium on my Dell Inspiron 1721. Can I upgrade to windows 7 Ultimate 64 bit software. I have purchased Windows 7 Ultimate and received both 32 and 64 bit software discs.
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
I installed Win 7 fine and about a week later I dropped the DVD. There is a scratch on it that is noticeable. I then copied the DVD to a folder on my C: drive to see if there was an error on it. I got a message when it completed "Copied Successfully". Would you say that would mean it copied with no errors and the DVD was not harmed by the scratch?
Am in deep trouble again - my WLM password has failed yet again and I don't know how to recover it. I have tried everything that I can think of even going to the length of creating a hotmail account which also I cannot access. SIW shows up the saved password but it will not work.I rely on WLM for contact with just about everyone including SF and it is truly getting me down. Is there any recovery apps that anyone knows of to get back the WLM password that is so important?
I built this PC a couple of days after windows 7 came out. I've been very happy with it, and with windows 7. It's all been running great.
I was shocked when my graphics card (an XFX ATI 4850) scored 7.3 in the WEI tool, but pleased at the same time.
Earlier today i updated the drivers to the latest ATI Catalyst drivers, something i hadnt bothered to do before, then ran WEI again. This time it wasnt a pleasant suprise i got, as my score plummetted to a measly 6.0.
I wonder if these drivers are actually making my GPU perform worse, or wether, without the latest drivers, WEI just wasnt sure of my graphics card and so tried to make a rough estimate the previous time i ran it.
What do you think? Should i roll back the driver change? I cant see any difference at all in the games i play but i'm not playing anything particuarly hardcore to push this beast anyway.
I have a Wireless Trendnet TEW-432BRP router. My wireless internet connection keeps dropping every 30 minutes. After it drops it usually reconnects by it self in like 1minute. This is getting to be annoying since this occurs a lot while I play online games. This router has been perfectly working fine before. It is connected to the computer using an Ethernet cable
I have a Samsung Laptop and it was in hibernation mode when it was knocked off of an ottoman and fell about a foot and landed right side up on the floor. When I opened it there was nothing but a black screen with a cursor on it. So I turned it off by holding down the power button and then turned it back on the sumsung start up screen came on and then the screen was black except for a Little flashing white bar on the upper left hand side and then it just stays that way, I have also tried taking out the battery but it did not work. One time it came up with an error saying your computer can't come out of hibernation anything not saved previously will be lost and at the bottom it says enter=continue but when I hit enter nothing happens.