I have hundreds of backed up files on my D drive, nearly 100gigs of them over the course of a year or so. (which is just a partition of my hd)I have lost everything on my computer somehow, and when i attempt to restore these files , the computer states "There are no backups on this computer."
View 3 RepliesMy laptops stuck in a startup repair loop. Start up repair is unable to fix the problem and sends me to recovery manager. However, before I move on to getting my computer back under control (wich will be on another thread on another day)Theres tons of websites and stuff on there that id never ever find again if I lost them now. I used the file backup program in recovery manager to back up stuff like music, pictures, documents, and among other things, internet settings.What I want to do now is go into my flash drive and find where all my favorites are. I went to the only other computer in the house besides my hp, a mac, and plugged in my memory stick. What's in it is nothing I understand.ow Im sitting in front of the mac, typing out my situation on the sevenforums.com and just wishing there was a simple way to get my favorites up on the screen...Or at least understand enough of whats inside the memory stick to be able to extract them once my laptop is fixed.
View 1 Replies View RelatedI had to completely restore my laptop due to a virus. I have an HP and was able to back up my photos through HP recovery mode. However my three backup discs have tons of .wim files and I cannot open these. How do I convert them back to files that I can actually open and view? I am a newbie to computers but when it comes to converting .wim files- I have NO idea where to begin.
View 6 Replies View RelatedOk, so my laptop pooed its pants and decided to break after numurous half successful attempts to fix it, as i had established it was a harddrive problem, i backed up my files onto 3 disks and system reset my laptop.I automatically backed them up, what i mean is i let the computer do it for me it scanned them and put them onto the disk and what not. So it got reset and i booted it back up did all the hoo haa and eventually got back to the main bit. it never explained to me how to re add all my backed up data and even though it recommends using disks whenever it mentions backing up data, when you look around the help pages all it talks about is internal backing up, so it gives you no clue of how to re-add all this data, which is very frustrating.It has all saved as .wim files, don't know why.
View 2 Replies View Relatedthe storage disk in my server went bad (after 3 months!) and when I got the new one I copied everything over but some of the files aren't working right now.Specifically the video files that we stream over serviio. They look right, they're still the same size, if you go to properties it still shows them as .avi files, but they won't run.Is there someway that I can repair these files? I tried an .avi repair tool but it doesn't see the files as .avi.
View 9 Replies View Relatedcan i still retrive my files? I can not open my files when i reformat and backed up my files, files became on a shorcut modes all files.
View 1 Replies View RelatedStarted using robocopy to do my backups. In my command lines, i can specify directories on a external drive to backup to.Some directories show up and i see everything. My most important directory " my documents" DOESNT SHOW UP. I have confirmed a backup is occuring, via log file and properties on the backup folder. I edited it down to a backup of only that folder. Log file shows good, external drive shows the "backup" root directory and properties ( size, number of files) match log file. Open up the backup folder, NOTHING LISTED. I have to run the script as adminstrator , my user is admin also, but if i run it as myself, it cant access the folder. I think im dealing with a rights issue, i have edited security on the external drive, even reformatted it , still nothing shows up?
View 5 Replies View RelatedSolution Needed: OLD machine was dying, bought a NEW WD 250GB HD, partitioned it into two 125GBs, installed it into an Ext Enclosure & SAVED ALL MY STUFF ... When I backed-up my files to ext HD, WinXP decided to use the WORTHLESS Windows_LDM format, which OF COURSE the new machine cannot see - recognize - acknowledge ... My APPLE sees it as a Windows_LDM Volume, but the G4 PPC MDD 10.4.11 can't do anything with it EITHER: I am NOT PLEASED: Where is the ANSWER FOR THIS?!?!Now running Win7 Ultimate (SP1)on a Compaq, AMD Athlon 64 3500+, 2.2GHz
View 2 Replies View RelatedIs There A Way To Get Win 7 x64 To Recognize x32 Files & Programs
View 2 Replies View RelatedI have an external USB drive attached to a Windows 7 Ultimate box. The USB drive has video files that I stream to my Samsung TV using DLNThe setup works except last night when I copied over .MP4 files to the USB drive. For this file extension, the files did not show as playable over DLNA. Is there a way to enable the setup to recognize this file extension?
View 1 Replies View RelatedI am trying to install windows 7 64 with a new M3A79-T. It keeps freezing at expanding files with error 0x80300001. I figure this might be due to missing sata drivers but when i click load drivers during the installationwindows doesn't recognize anything. I tried with the mobo support dvd and i tried burning drivers from the mobo website and using that dvd. In either case i can browse to the dvd but all the foldersin it are empty, so nothing to install even though the driver are definitely there. when i click on scan
View 7 Replies View RelatedI notice that one of my backup programs has selected all the folders in my User folder to be backed up. Among those selected is the hidden folder AppData, containing 8800 files. Since there are files in there that seem to change daily, it slows down the daily backup. I am wondering if there is really anything in there that I need to back up. I've read that some older versions of Outlook and sometimes Windows Live Mail put data in there, but in the past I've restored computers and I've never copied anything from AppData. It does not seem to be the stored emails, perhaps it is confuguration data? So my question is, can I remove AppData from my backup job and what might I be losing?
View 9 Replies View RelatedWhat is backed up in the backup program that comes with Windows 7? Also, is it an incremental backup? I can find nothing about the backup online, that gives specifics about the service.
View 3 Replies View RelatedWell I used clonezilla to backup my c drive before I moved from Win 7 rc 7100 x64 to Win 7 Rtm x64 7600. Back up worked fine.
When I went to restore the c drive it failed. After numerous tries at restoring my c drive and d drive where erased.
I only have a back up saved of my c drive and would like to restore it using anything but clonezilla. Something very user friendly if possible.
Any recommendations and or guides would be great. Free or paid software.
Doesn't matter.
I got a new SSD drive so in installed it into my computer and unplugged my other 2 internal drivers one with Windows and the other with Files on it, so i installed windows 8 fine so i shut down and disconnected the SSD just to be safe and unplugged my other two back in so i can copy all my data off my Win 7 to my Files drive. So i copied all my data (600gb) to my other internal drive into a folder called [backup] so when i was done i shut down and unplugged my Win 7 drive booted into my win 8 drive and was going to copy all my data back over but the folder [backup] isnt on my other drive! its gone, but it says the space is still used up on the drive it used to have 1.7ishTB free now its only showing 900ish GB free but i cannot see any of those files. Im freaking out because its everything i own and cannot loose these. How can i get access to my files? I tried searching on the drive for the files because i know some names but nothing came up, i even made it show hidden files and everything. I tried booting back to my win 7 drive to see if they show up there but they are still now showing up either. I know when i restarted it and booted it asked to do a check disk on all my drives but i skipped it to make sure it didnt mess anything up but i just retried it on that drive with my files and it started saying "deleting index xxxxxx.file" scrolling really fast so i restarted really quick.
View 3 Replies View RelatedI want to do some partitioning of my hard drive and ideally would like to reclaim the space used by the recovery partition. If I copy my recovery partition (20GB) to an external HD or other media and restore it later if necessary will that work? Is there some hidden something I should know about that will come bite me in the a** if I do that?
View 1 Replies View Related"Error 1606. Could not access network location %public%Desktop." when uninstalling a program:I have a windows 7 x64 machine and just recently I started getting error 1606. I looked up the previous threads and followed instructions. They worked for others but not for me. I tried the Fix It patches but still my problem is not fixed. Just today I noticed the following:My Op Sys was resurrected via an image that I had saved a month ago. If I try to uninstall any of the programs that came with the Image, I get error 1606. However, If I install a new program it will uninstall just fine.
View 3 Replies View RelatedMy PC does not recognize rw cd, but my friend's pc does
View 1 Replies View RelatedWe are running a small network with a NAS and networked PC's. The PC's are all running Windows 7 Ultimate. One PC will open files already open by others and does not notify that the file is in use. This user enters information into the file, saves and closes.When the original user (accessing the file first, sometimes adds information) saves and closes the file, the changes from the second user are lost.
View 1 Replies View RelatedI have a pretty old Compaq Pressario that was running 2 512 MB sticks so I added 2 1 GB sticks today but it still shows it only utilizing 1 MB. I put the new sticks in the original slots and moved the old ones over so it is not an issue of installationI ran CPU-Z and all four sticks show up in the SPD tab but the 2 new ones only have values in the timings table under JEDEC #1, the 2 old ones have JEDEC #1, 2, and 3.
View 8 Replies View Relatedi want to ask. My windows cannot recognize my CD-R files. i put in my CD-R and windows recognize it as blank CD-R. while there's file (an autorun files and software installer) in that CD-R. i have pc and laptop, i try putting my cd-r on my pc (win xp sp2) my windows recognize the file, but when i try putting on my laptop (win 7 64bit) it recognized as blank cd-r.
View 1 Replies View RelatedI have two drives by seagate 1tb and 500gb. The 1tb drive is highspeed but when i plug it into the 3.0usb ss it does not show up. Im stuck using the 2.0 drive.
View 6 Replies View RelatedI am running Windows 7 Ultimate on a Macbook Pro, and I would like to use the laptop screen as well as my ASUS 23" lcd monitor. When I open the display > screen resolution window, it shows that I have only one display, and gives me no options for multiple displays. The same image is displayed on both screens. My 2nd monitor is hooked up through DVI, and worked just fine with Windows XP. Does anyone know what my problem might be?
View 1 Replies View Relateda few days ago i have connected my racing wheel. it worked well, but 2 days ago iv'e connect the wheel again and suddenly it says "USB device not recognize"?
View 9 Replies View RelatedI was gfiven some external hardrives with enclosures and was told they all work. I cant get a single one to be recognized in computer. any tips or workarounds to get windows to recognize these drives. I am now using an acer 64 bit laptop.
View 1 Replies View RelatedI want to install a HP printer HP laserjet 1020 on a PC with Windows 7 32, When I plug it, I receive a message like USB device not recognize. I did try the USB port with a USB memory stick, and the USB port is functioning. This printer had worked few time with the PC. Now, never connect. I uninstall the printer driver then re-install, same problem
I did try the printer in another system and it work Is it possible the the USB port is no sourcing enough current for the printer?
does it recognize it as general how much ram, or does it go specific. sorry if its a confusing question..but i have a gig ram on this laptop and i have some used for video ram..so total is a little under 1 gig, how will windows 7 recognize this, as "your pc has 1 gig ram" or "your pc has 9** ram".
View 8 Replies View RelatedI have been pouring over countless threads on issues related to this. Yet none of these solutions seem to be working for me, and I am fairly certain that I am implementing them correctly.Xbox and PC do recognize each other and I can access the libraries on my computer via xbox.I have setup the Windows Media Center on my Xbox.WMC on my computer shows the Xbox is setup as an Extender. It also states that it is ready for use. Every time I try to run WMC on my Xbox it enters the black screen that says Windows Media Center and has the load "bubbles" underneath with the word Contacting... after a period the screen times out and gives me the message:"Connection Failure.The Xbox could not connect to the Windows Media Player PC. Turn the console off and and back on again, and try again."
View 1 Replies View RelatedI have just found to my irritation that iTunes _will_ check CD info such as song names etc. ....however....
Every now and then it fails to find info. It almost seems as if it does not even try. Usually when I insert a CD, it tells me it's checking with Gracenote, and in short order the details pop up. Then suddenly it will just not get details. I have read the instructions and reasons why.
What does not make sense is that in two instances, Disc 2 of a double disc set will register, but disc one will not. This has happened with Physical Graffiti, by Led Zeppelin, and a Best Of by Faith No More. Of the maybe 1/2 doz CDs that have failed so far, the others were single disc. The failures have failed in spite of repeated attempts, restarts and even a reboot. All the failures were pretty popular, and what I thought were far more obscure stuff worked fine.
EDIT: I now have three double CD sets that have had the first disc fail, while the second gets info. So that is over-represented, but not exclusive: that is to say I have had double CD sets that worked, and single CDs that have failed to supply info from the web.
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7.
View 2 Replies View RelatedMy Windows 7 does not recognize my Overclock CPU-Z says all is oki but at windows it shows 3.07ghz/3.07ghz even it should show 4.02ghz/3.07ghz.
View 3 Replies View Related