I'm having a problem with a dying hard drive freezing my pc after having it installed.
I'm trying to transfer the files on it to an old hard drive but can't. I initially was able to transfer for about 20 minutes when the whole pc froze. Things seem to work normally after a reboot though and the dying hard drive unplugged.
I really need the data on that hd but its 1.45 tb I need to transfer.
I'm having a problem with a dying hard drive freezing my pc after having it installed. I'm trying to transfer the files on it to an old hard drive but can't. I initially was able to transfer for about 20 minutes when the whole pc froze. Things seem to work normally after a reboot though and the dying hard drive unplugged.
View 1 Replies View RelatedRecently i installed Windows 7 Ultimate and got that activated. Every thing was working fine.
When i connect my 2nd Hard Drive and boot the system then the System says that : "Your Windows 7 is not Activated, only 30 Days left to Activate"
how do I fix this??... I tried downloading a patch from here [URL]
but I keep getting error messages when I try to install it
I'm using a decent Lenovo B560 laptop, and when playing games or running programs linked to the hard drive disk, it freezes intermittently.
Not sure what's causing it, but the whirring of the disk drive can be heard for about 3 seconds, at which point it slows down, and then the game freezes until the hard drive starts whirring again. It doesn't seem to be able to keep itself running in order to keep playback fluid; it just keeps spinning long enough to power 3-4 seconds of playback.
System is 7 64 bit, with Intel Core i5 CPU M480 @
2.67GHz
3GB RAM
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View Relatedmy computor speakers are hard wired together, yet only one of them has sound,why
View 1 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI recently purchased a OCZ Diesel 8GB USB drive and i plugged it into my computer and at first everything was fine then I tried to transfer some files onto it and kept hearing the "dadum...Dadum" as the drive kept connecting and disconnecting and now when I plug it in it wont stop doing that. Any suggestions on how I can stop this from happening or do I need to return the drive?I tried different usb ports on the front and back of my case and I put in my old USB and it worked fine. I also tried it on another computer and when installing the drivers it got hung up on "searching pre configured driver folders" and the same thing happened.
View 9 Replies View RelatedI bought a used hp tower with twin xeon dual core processors a few months ago. It was a great machime but only has dvd rom. I wanted to burn a disc but couldnt, so I tool my old ISE Dvd drive out of my old computer, bought new only about 1year ago. I insterted it and a screen came up say that my system configuration had changed and press F1 to accept the changes. I did this and then it faild to boot!
I have removed the dvd drive and tried again but the same, will not boot. I then removed the original dvd drive and you guessed it, still wont boot.
I have run windows repair but nothing. How can I get it to boot without reinstalling? I only have 1 hard drive (sata) and stupidly havent done a backup (doh!!)
On startup, I get the message shown below. If I open Explorer the network drive is shown with a red "X" through it. If I click the network drive, it connects and displays the contents without an issue. If I run any application that needs files on that drive before clicking it in Explorer, it will say the resource is unavailable.
What appears to be happening is Windows tries to reconnect to the drive before the network connection is reestablished. I believe this to be the case because the network icon in the system tray is still showing the animation for establishing the network connection when the message pop's up. There is no issue with authentication or password's, etc., as the drive connects as soon as I click on it.
My question is, does anybody know of a way to set the mapped drive reconnection farther back in the boot sequence or add a longer wait state to it so it doesn't time out before the network connection is reestablished.?
I have an issue where my computer makes the "ba-dum" sound randomly and hangs for a moment, but I haven't connected or disconnected a drive. It seems only to happen when I am moving the mouse. I noticed it for the first time after Norton 360 started telling me I needed to buy more online backup space. I also noticed that the Norton backup drive, which shows up as an "other" folder in my "computer" folder would pop in and out in time with the sound. I called Norton technical support. They were terrible, so I uninstalled Norton. I downloaded a trial of Vipre instead. When I installed Vipre, it said that Norton had not been completely uninstalled. I couldn't find any Norton programs in my program manager, so I installed Vipre anyway. The sound and hangups are happening less frequently, but they still occur. I no longer see a drive popping in and out on my "computer" folder.
View 3 Replies View RelatedI have found the reverse but have yet to find this exact problem. My computer, running Windows 7 64 bit, will recognize the printer but won't let it connect to the printer. The network drive is not even seen. Both the printer and the network drive is hosted on a computer using Windows XP 32 bit.
View 4 Replies View RelatedI have a FW800 external storage drive and only usb 2.0 ports on my laptop.Would it be possible to use a laptop ExpressCard with a FW800 port plugged into a USB ExpressCard adapter?If it does work, would I see any of the FW800 speeds or get capped by the USB 2.0 port?
View 3 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
i decided to bring over my big backup drive last night. after connecting it i was getting some strange happenings. icons in the taskbar to the left were missing and the clock moved up to October. i then noticed problems with web certificates for gmail and google and other sites as well. it was quite frustrating! i was glad to figure out it was the clocks fault. but i am still feeling the the effects. games i play on the net don't seem to be following that the clock is alright. they continue to complain about invalid certificates and whatnot. i'm having problems reinstalling flash too. it's amazing how much of a problem this caused and is still causing! i hate to be rushy but i want to get a hold of these things as soon as i can. but i know it takes patience too. i'm not sure what else to do. luckily the offline installer for flash seems to work.
View 5 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI am stuck trying to figure out whether or not an optical drive messing up could have some serious performance repercussions. This is because my computer is freezing pedantically and I took Windows' advice and assumed it was my HDD which was corrupt.i bought a new one, installed it and everything seems all right at the moment, the only problem is is that I am on a fresh install of windows and my optical drive is being temperamental - sometimes working, other times not even realising it has a disc in it. When it does realise it has a disc in it, the applications (such as driver installers) crash mid-way through their process - my computer locks up and begins to freeze again, but this time, I can just eject the disk and everything sorts itself out almost straight away.
View 9 Replies View RelatedI've spent my whole day trying to figure out what is going on with this to no avail What I've Done:Installed Windows 7 ultimate 64-bit OS on Crucial M4 drive that was acting up and freezing Continued freezing after installing drivers, stable for 10-30mins then freeze, requires hard reset every time updated FW to 000F as recommended, same deal swapped ports with platter drive, same deal took drive in to where I bought it from, they said all stress tests etc went fine Pretty much at my wits end. I'm fairly convinced its nothing else since I am running on the seperate mechanical drive fine.
Specs as follows:
Acer Aspire 8943G-5636
Intel Core i3-350M processor @ 2.26GHz, 3MB L3 cache
ATI Mobility Radeon HD 5650
8GB memory
500GB Western Digital mechanical HDD
128GB Crucial M4 SSD
I recently built my first PC three days ago...
Specs:
i7 bloomfield 960 processor
4x4 vengeance ram
crosair hx850 PSU
evga x58 ftw3 mobo
hd 6870 radeon graphics xfx
When I first installed windows it started to work just fine but I soon noticed that it would randomly freeze every 15-30 minutes of use, but not on a particular program or anything. I assumed it was drivers so I installed the latest drivers for my GPU and MOBO and keyboard. It seemed fine again until it started crashing again. I ran a GPU burn test and a CPU burn test it passed both. (I tried runing memtest86+ but it froze at like 12%) Then I tried fixing the registry so I downloaded ccleaner and fixed the registry problems. Freezes continued. I finally decided to re install windows so I did and the problems still continued. I am at a loss of what to do and can't think of anything else.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related