I changed the 'open with' of my .001 file into shell32.dll (I went to system 32 and just typed it in). I did this by right clicking the file, went to properties, then at Open With, clicked Change, then browsed over to Windows32 for shell32.dll by typing it in the file box and clicked enter. Now I regret my actions and want to change it back to its default original (which was: Windows Shell Common DLL). Now the menus and stuff on the files' Properties is totally different. And what's more, the Open with change button and all is gone! How do I put it back to the way it was?
Auto-Hide will not take effect in Taskbar Properties when Apply button is used - even though Apply button grays out indicating change has been made. If Auto-Hide is set ON in Taskbar Properties and RESTART is performed, Auto-Hide may work one time but then TASKBAR will not hide again. This is on an HP Dv6 Notebook that came with Windows 7 installed. Auto-Hide feature used to work most of the time?
since I accepted the update to Microsoft Windows 7 Essentials 2011, the "fix" photo button has disappeared. This used to be essential to tidy up photos that I imported from my camera.I even uninstalled windows essentials and still no joy.
Yesterday I went to click on my photo file which has all my photos from as far back as 2006 and I clicked the mouse button fast and the file was gone. I hope I can recover it. It's all of my family photos. The file is on an external hard drive and not my computer.
I'm still not too familiar with Windows 7 that is installed on my laptand would like to know how do you go about changing the propertieswhen you put in a blank dvd or cd or a movie????There are certain programs coming up that I don't want towhen I insert blank media or movies. moranacus has chosen the best answer to his/her question.Click here to view the answer that was selected.
i have windows 7 home premium 64bit where im loggin as administrator. Im trying to access the properties of TCP/IP but i couldnt; when i click on TCP/IP and click on Properties; the properties screen just pops for blink seconds. Also uninstall option for TCP/IP is grayed whereas i can successfully uninstall/install other things like Client for MS Networks, File & Print Sharing for MS Networks.
I triend uninstalling network card driver and reinstalling it but still same problem. This problem is happening with my both Wireless Network Adapter and Wired Lan adapter.
have windows 7 home premium 64bit where im loggin as administrator. Im trying to access the properties of TCP/IP but i couldnt; when i click on TCP/IP and click on Properties; the properties screen just pops for blink seconds. Also uninstall option for TCP/IP is grayed whereas i can successfully uninstall/install other things like Client for MS Networks, File & Print Sharing for MS Networks.I triend uninstalling network card driver and reinstalling it but still same problem.
when I right click computer and click properties, nothing happens. Same thing if I try to run system.exe from the start menu or access it through the control panel. I've just recently re-installed windows and I'm trying to activate it with my key.
I have been unable to share files. Not only between two computers both running Windows 7, which I'm trying to sync some files in (OneNote), but I can't even change the properties.
I've tried everything, from going into advances sharing settings in the drive and giving full permission, to just the basic right clicking on the file, clicking Share With, and trying to click Homegroup, or going into specific people, and no matter what, it just keeps saying Nobody, with the lock icon next to it.I have gone into the firewall and made sure that's not an issue...it just seems that no matter what, Windows just will not allow me to share ANY files in my documents folders.
I can't open Mouse Properties in Control Panel. I click and nothing happens. I ran sfc /scannow but it didn't fix the problem. It found some corrupted files which it couldn't fix, but they weren't related to the mouse or control panel in any way I could see.
The probelm only happend on 1 Windows 7 PC, suddenly the PC slow to open some network printer properties that also makes slow to print.
1. On the PC nstalled 3 Network printer A,B,C open B properties is normal fast, but slow to open A,C.
2. Others PC also installed those 3 network printer and No problem.I have replace NIC, Reinstall/Repair Windows 7 but no success, How to trace/diagnose PC to Printer communication so I can figure out what the problem is.
I was trying to change a mp3 file properties > details, but it won't let me. There is nothing listed. When looking in explorer, it shows no album information or title. It does it with video files as well, so I am assuming all properties.
When I do change something from the bottom, it gives me error 0x80004005: Unspecified error. 'An unexpected error is keeping you from applying properties to the file' I used to be able to, so not sure what happened!
MediaMonkey can see the details, but every file on the computer, I can't see the details in explorer? Do I have to register some .dll? Regserv32 of some sort?
when I try to open a program It happend when I was associating a blank icon, one like in the photo, with the game it used to be, which I had re-downloaded but the icon showed as if the game was no longer on the computer. When I done this, all of the icons on the screen and on the 'start' screen when you go into 'all programs' turned to the game icon. I then deleted the game and restarted the computer as 'last known good configuration' or something like that and after it took an unusually long time to start up (about seven minutes), all the icons showed up as in the ones shown on the screen shot above.
In Windows 7, all the good icons are in %SystemRoot%system32imageres.dll, but we're still taken to the old SHELL32.dll when it comes time to change an icon.
Is there a registry key or something that we can change to remedy this?
My customer has a small business with 2 x HP Proliant ML110 G6 servers installed ith VMware ESX 4.1.He has 7 Windows 7 64-bit workstations in a domain. He has a Windows 2003, 32-bit Domain Controller and 5 of the machines are in the domain. The other two are in a Workgroup and have DNS and DHCP on Windows 2003 Servers also 32-bit. All of these run as VMware Virtual Servers on the Proliants.The workstations in the Domain are all Windows 7 Ultimate 64-bit. Everything has been working well for almost 3 years. A few weeks ago, they setup an extra server but decided that the VMware Server that the DC was on, was running low on memory, so they Cloned the Windows 2003 DC to the other VMware server. They say that everything was fine until they discovered that the shared printers no longer worked and various other problems.That was when I got involved. When I checked Control Panel --> System --> Advanced System Settings --> Computer Name, it shows the Full Computer name (plus domain), the Domain BUT...
The Network ID is greyed out but the Change Button is OK. If I click the Change Button, Member of Domain shows the domain name, but it's greyed out.I shut down the cloned Domain Controller and started up the original one, but this didn't make any difference.I tried taking one of the workstations out of the domain, but when I tried to put it back, the Domain stayed greyed out, so no way to put it back in. Netdom is also missing from all the workstations.They had a backup of this workstation, so I restored the backup and Voila! the computer was back in the Domain. Unfortunately all the backups of the other Windows 7 Workstations are WAY out of date.
This will permanently remove or change the Start Button "Start" balloon tip.I'm using ResHack v3.5.2 Beta for this tutorial.GoTo C:Windowsen-US and Take Ownership of and then copy the explorer.exe.mui to somewhere safe.If you are running a 64 bit system you should also modify the explorer.exe.mui which is located in C:WindowsSysWOW64en-USNow open your explorer.exe.mui(s) in ResHack and navigate to String Table 34, line 533. Modify / delete to your liking.
Before: Code: STRINGTABLE LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US { 530, "Unable to run command. The folder '%1' has been removed."
[code]....
Now go to your original folder(s) again and rename your original explorer.exe.mui(s) files (explorer0ld.exe.mui ?) then copy and paste your modified explorer.exe.mui file(s) into place.After a re-boot your start button balloon tip will have changed / disappeared.
I recently upgraded my FF 7.0.1 (or whatever the most up-to-date version of 7 is/was) to 8.0 and am noticing an issue. The problem I am experiencing is that when I launch FF (regardless if its done via the start menu or the button pinned to my taskbar), it adds a separate taskbar button (a la previous versions of Windows) instead of how Windows 7 normally handles such things. In addition to this, it also does not reflect having multiple tabs/windows open on the taskbar button (the attached image shows how the button for IE(9) displays the different tabs I have open in it, as well as the vertical lines next to the button which represent the number of tabs/windows open; however, the Firefox button does not function in either way, but you can see in the image that I have 3 tabs open in the browser window).Are these compatibility bugs between Windows 7 and Firefox (that the Mozilla devs need to address)?
I searched all over the web including this forum and nothing, sfc /scannow didn't work. There has to be some registry key that is missing or i need to modify.
Yesterday, the task bar and Start button mysteriously disappeared.I've also found that the "Taskbar and Start Menu Properties" windowdoesn't come up. There are two places to click on in Control Panelthat should bring up this window, but it doesn't. The Control Panelborder changes color as if something is starting to happen, but thennothing happens, possibly indicating that some program starts to runbut then finds something wrong and exits. I didn't see anythinginteresting in the error logs. The desktop icons appear normally.The problem exists only when logging onto my son's account. When Ilog on as administrator, the task bar and Start button appearnormally.The usual tricks don't work: Ctrl+ESC, or bringing up Task Manager andtrying to rerun explorer.exe. I tried sfc to check for corruptedfiles, but none turned up. I ran an AVG scan and it did find one fileit considered a threat, which it removed, but that didn't solve theproblem.
I found a web site that referred to the registrykeyHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorerwhich has a NoSetTaskbar value that can be used to disable the"Taskbar and Start Menu Properties" window. On the administratorlogin, the Explorer subkey is there all right, but doesn't haveNoSetTaskbar. (It does have NoDriveTypeAutoRun.) But when I log ontomy son's account, the Policies key had no subkeys at all. I triedadding an Explorer subkey without adding any values, but this didn'tsolve the problem. I haven't yet tried adding a NoDriveTypeAutoRunvalue, but since this seems to pertain to AutoPlay it didn't seemrelevant to this problem.Any thoughts as to what might be going on or what might fix it?
i would like to know if it is possible to change the behavior of show desktop button in the lower right from its default winkey+d and change its behavior to be similar to winkey+mi always use the show desktop button however im using a rocketdock and pressing the show desktop button will also minimize the rocketdock
I am facing problem in my Window 7 display due to my kid accident click the setting change (I don't know how they change) that cause the "start" button change from icon to the word "Start" with window image, also my font seem to be smaller than previous, did any senior can help me to restore to the normal view
i have windows 7 x64 in my dell precision notebook.i have administrator user and tommy user.tommy user is in admin group. but not able to execute any program but its account type is standard.then i logged in as administrator and went to UAC there i try to change the account type of tommy user from standard to administrator.....as soon as i click the administrator's radio button. the "change account type" is disabling...its not enabling.
