No Boot After TdssKiller Scan
Mar 22, 2012
I ran TDSSKiller on my Lenovo computer with windows 7 32bits on it and it has detected a Backdoor.Win32.Sinowal.knf. After the scan i removed it and it told me to reboot the computer to finalize the operation. The computer never wanted to reboot and just froze. I manually rebooted the computer and all i was seeing after the Bios screen is a black screen with the little "_" (underscore) on the top of the screen and nothing was happening. Tried to reboot and always the same thing. I plugged my hard drive on my other computer in a usb case and i was seeing all my files and the Lenovo system partition. I did a backup of my files. Then i made a booting usb with the recovery console on it and booted without problem. Tried to do a fixmbr and chkdsk and bootfix and nothing worked. Actually chkdsk found some problems and fixed it but still no boot. [code]
View 1 Replies
ADVERTISEMENT
Aug 21, 2012
Anyway, I'll get straight to the meat. I have in my possession a Gateway laptop running Windows 7 Home Premium. The person who owns this laptop ran TDSSKILLER, and deleted the TDL file system it detected (DR0). Now, naturally, it will not boot into Windows. To be more specific about the OS, it is Windows 7 Home Premium OA Acer Group. I do not have the original OS media. What can I do to get the system back up and running?
View 5 Replies
View Related
Oct 5, 2012
pls give me a link for avst antivirus 6 pro which can provide boot time scan facility for win 7 64 bit..
View 4 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Jan 8, 2012
My laptop is in a homegroup with my desktop to do printer sharing and also remote desktop. Not sure when it started but both systems are booting very slow. So I ran the sfc /scannow. The CBS.log shows the errors that couldn't be fixed. Is there anyone that can help me fix the errors?Because I did an anytime upgrade doing a clean install is going to be a real pain and I am hoping with the log that I can attempt a fix rather than doing a clean install or system repair which both will require hours of doing. Seems if I understand the log that one problem is a printer issue, maybe?I don't want to post the log here and am not sure which forum I should seek help on.Both my systems are running Win 7 64 bit, Norton IS 2012, Malwarebytes, and I use CCleaner on a regular bases. Everything tells me I am free of any problems like viruses, malware, spyware and the like.
View 6 Replies
View Related
Feb 22, 2011
On my old machine with XP, I ran the HP specific drivers without issue and these drivers could scan directly to multipage pdfs. On the new computer with Windows 7, the generic HP PSC 1200 driver that is part of Windows 7 will not scan to pdf. It does the bmp, jpg, tiff, and png. And not multi page. Any way to get back the pdf capability without having to buy acrobat? I legally had the ability before the "upgrade".
View 3 Replies
View Related
Jan 13, 2012
I need to print all incoming faxes to pdf automatically and unattended. I have selected a good pdf printer, and set the print option (Tools-Fax Settings-receive-more options). The fax come is, the print to pdf never happens.
View 2 Replies
View Related
Jun 10, 2012
I am trying to scan my system using SFC but it does not seem to work.
View 3 Replies
View Related
Aug 17, 2012
I have been having some issues with Indexing and my outlook. Upon searching for a fix, I attempted to run SFC. I get to 16% each time and it stops with an message - Windows Resource Protection could not perform the requested operation, I have performed virus scans and my machine is clean.
View 4 Replies
View Related
Apr 28, 2012
I just got my laptop from service. It is a Sony Vaio They supposedly restored my computer to factory setting but I can't update my computer.
The bar to the left is red and i see a red shield with a white x and it says most recent checks for updates: never
updates were installed: never i go to installed programs and nothing has been installed since early 2010.
It's like whenever i try to click check for updates button it's like something is blocking it from connecting and scanning is the best way I can explain it. I desperately need help to update all my software and security patches etc
View 1 Replies
View Related
Jan 22, 2012
I have installed windows 7, and connected it the my printer: (Brother DCP-135 C)
after connected it without install the software as I did before with Windows XP, it can printer, but cannot scan, I tried to install the software, it tells me I have to update
View 1 Replies
View Related
Dec 2, 2012
it's been weeks and I've tried everything I could: system restore, disk check, disc fragmentor, safemode scanning, etc My problem is that for some reason, all of my scans (superantispyware, malwarebytes and avast), all start to freeze during full system scans. Quick scans are completely fine, but when it's system scan, for example, superantispyware would hang when it gets to system32
View 3 Replies
View Related
Aug 25, 2011
scanning document with hp 7313 officejet all-in-one but problem attaching it to email
View 2 Replies
View Related
Sep 10, 2011
I'm trying to create a scheduled task that will wake my computer weekly to run a Security Essentials full scan. Apparently, the MSE scheduler does not wake the computer for scans but DOES put the computer to sleep during a scan if the sleep timer is set for less time than the scan requires (mine is).I have created a new Win 7 (64-bit) account to run the task because of apparent conflicts with doing so in the other user account. The main problem I'm having involves the "details" column of the "Actions" tab in the task properties; I don't know what to enter as the path for the MSE full scan so I can't tell Windows what program to start.
View 9 Replies
View Related
Jul 12, 2012
I have disconnected one of my HDs for audiorecoding. Windows seems to try to boot from it from time to time. Sometimes when I cant boot, the windows installation cant be found at all. Win keeps telling me to change the wireless USB to a faster one, and somtimes it drops out.I have updated all drivers lately, run chkdsk and scf / scannow : it finds files damaged, but cant repair.Even when I bought the PC it could not find the one of the HDs, I changed the ASA-connect-cables and it worked till now. most of the time the PC runns ok.
View 4 Replies
View Related
Dec 2, 2009
I have tried the suggested fixes but I cannot get Epson Scan to open. I have Windows 7 Priemium 64 bit and Epson Perfection Scanner V300. The software that came withe the scanner has no driver for windows 7 but I have the updated software from the Epson site for Windows 7.
I have uninstalled the driver in the device manager and loaded the updated software but Epson Scan still will not open.
Can guess I not doing something in the correct order.
View 4 Replies
View Related
Oct 6, 2011
I just bought a new WD 2TB ext. HD.Scanned for bad sectors (COMPUTER - PROPERTIES - TOOL - CHECK NOW): took me about 6hr, then I quick format it (of course very fast). Should I need to do normal format?In this case since I already scanned the HD, no need to do full format.
View 1 Replies
View Related
Sep 29, 2009
Does anyone know if you can use the Windows 7 Windows Fax and Scan with a shared printer? I got my computer to print via the shared printer, pero when I attempt to preform a "New Scan," it says no scanner is attached to my computer. Any insight?
View 2 Replies
View Related
May 6, 2012
does windows run disk scan on startup if necessary?
I have a problem that causes my laptop to freeze after it is idle for 20 minutes and I have to power off. But during restart disk scan don't run so I've manually scheduling it and restarting again. Do I need to do that?
View 1 Replies
View Related
Jun 26, 2012
I have been having intermittent OS problems on my PC, so before they managed to get any worse, I ran the sfc/scannow check.It ran without a problem and when it was done it reported it had completed 100%, however "Windows Resource Protection found corrupt files but was unable to fix some of them."So, I go into my windows (yes I am logged in as administrator) to read the log file and access is denied. I went into the security settings for the main Log file to change the security settings for myself to full control, however it didnt change anything. I am unable to get to any type of security measures for the file itself going the regular route via its properties.I am not all that knowledgeable with these types of things, (but know enough to get myself in trouble now and again! ) and would appreciate knowing if there is something else I need to do in order to gain access and read this file? I also tried to get to it going through my Administrator Command Prompt but I was denied access in this attempt also.
View 1 Replies
View Related
Aug 9, 2012
I had the google redirect virus.. tried removing it myself through different methods.. still remained, so I decided to back up all my things and just reformat and reinstall. yesterday I did a dell factory image restore though, instead of doing a OS re-installation using my windows 7 disc, entering my product key etc (probably should have...)long story short: my mouse is lagging. i should note it started to lag before i did the factory restore also. at that point i figured it was just the virus/malware.but it's still here and driving me crazy. i googled and poked around the forums- following different advice to no avail. i performed all of the dell hardware diagnostic tests- passed them. i've done sfc /scannow 3+ times. tells me there are corrupt files but are unable to fix them. log shows:
2012-08-09 15:48:26, Info CSI 00000200 [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS,
[code]....
View 4 Replies
View Related
Jan 13, 2013
I have Window Seven family on my laptop.It goes quite well. but doing some maintenance, I noticed that SFC scannow detected a problem.
From the log (sfc detail below) it seems to me that it is autotchk.exe is corrupted, both in Windows and in Windows backup store.I can however do a checkdsk which go fine, and do not detect problem (it seems to often be the case when the autochk.exe is currupted). So it goes well.As suggested on many thread, I redid many sfc scans, reboot and retry (seven times at least) without change. O course I did also many virus and spyware scan, both software and online, an the PC is clean, so it don't seems to be the problemI would like an easy remedy, as I don't want to spend days reinstalling Windows, software and settings, and as everything else seems fine.
1 -I was wondering it the autochk.exe is really to be changed, and if this is the only SFC problem. (I posted scan details)
2 -And if so, is this a way I can just copy Autotchk.exe from another PC running window (32 bits as the laptop, in Ultimate or Starter version (both at hand) and replace it in Window.OR to take it from a friend PC that have Seven Family (exactl like the laptop) And also should I change also both autochk.exe.mui which are in the same file or is it pointless ? Or, if not possible, where and how can I get an clean autochk.exe ?
3 - Or is the whole thing unecessary, and am I better to leave things as they are ?
View 6 Replies
View Related
Apr 28, 2012
I just got my laptop from service (they replaced a new hard drive and installed windows 7). It is a Sony Vaio.i own it now but it's a slightly used rent-to-own type of deal so no windows dvd or system restore or anything.They supposedly restored my computer to factory setting but I can't update my computer. The bar to the left is red and i see a red shield with a white x and it says most recent checks for updates: never updates were installed: never i go to installed programs and nothing has been installed since early 2010.It's like whenever i try to click check for updates button it's like something is blocking it from connecting and scanning is the best way I can explain it. I desperately need help to update all my software and security patches etc.I found something online where it says to type services.msc and stop it and go to c/windows/software distribution and delete the files and then start the service so then windows updates still won't scan (windows 7)....says service is not running but it is.
View 2 Replies
View Related
Jun 30, 2011
my wireless printer wont scan
View 1 Replies
View Related
Sep 3, 2011
how Can get Benz scan drive
View 1 Replies
View Related
Oct 24, 2011
I have an old apparaat which is not compatible with windoms 7 home premium.what can i do
View 3 Replies
View Related
Dec 8, 2011
I have some old files that were created with an HP DDeskjet scanner. They are on my PC as an application when I try and open them in Win 7. I can not see the extension, but I think they are .jsd if my feeble memory is correct.I can not find any reference in HP,how I can get the fix to open these files and view them?
View 2 Replies
View Related
May 3, 2012
I have an HP Deskjet F4400 printer. And am using the scanner. My problem is I cannot scan to pdf since the file type support is only BMP, JPG, PNG and TIF. Is there any way on how to add PDF as file support in this scanner?
View 2 Replies
View Related
May 28, 2012
My Computer cannot scan from ir2018. It can only can print. Even though I have tried, but in vain.
View 2 Replies
View Related
Jul 6, 2012
scanned pictures 2 days ago, no problem now it won't scan at all. I've turned off computer and unplugged everything on scanner, still won't scan
View 1 Replies
View Related
Jul 23, 2012
I have just installed the Epson CX3650 all in one device on my new Windows 7 laptop. During the install process it said that the device was not compatible. It allowed me to install it anyway and the printer part of the device works. When I try to scan a document, however, it doesn't work and I get the error message that the scanner is not ready or another application is using it
View 3 Replies
View Related
