I have Windows 7 Pro SP1 32 bit laptop.It's a ThinkPad Lenovo T60p by IBM.I've been searching google for ever and ever but I cannot find a fix.I found this via Google: forum.thinkpads.com - Stereo Re-mix thread (was T61/p Sound Recording?)And I have no idea what it means but it looks like it has some information on this subject.
View 2 Repliesi want to record speaker output but there is no stereo mix option when i go to recording devices, what do i do...i believe it may be to do with my drivers needing updated but this will cost me..
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4043 Mb
Graphics Card: Intel(R) HD Graphics Family, 1797 Mb
Hard Drives: C: Total - 237916 MB, Free - 186744 MB; D: Total - 238622 MB, Free - 224591 MB;
Motherboard: Intel Corp., Base Board Product Name
Antivirus: Norton 360, Updated and Enabled
After I reinstalled my computer I saw that stereo mix is not recording any sound, so I searched for a solution on other forums , but nothing worked.Than I found this forum and I saw the thread "Jack output reassignments (Fix)" and I changed the registry binaries, but still nothing. I got this version of my realtek driver: 6.0.1.6526.I downloaded it from guru3d.com , because I can't download from the official realtek site.
View 1 Replies View RelatedBack in the day, most mics sounded awful and your only alternative was usb mics. However, newer motherboards seem to have better onboard mic (less noise) and any old headset will do.the motherboard I have is an asus P5KPL-CM it's onboard audio is:
VIA VT1708B 8 -Channel High-Definition Audio CODEC
and its chipset:
Intel G31
Intel ICH7
In windows xp, audio capture was fine. I primarily use the mic with online gaming and was really happy with how well the onboard sound recorded. Very clean, little noise. In game people said my mic sounded great and tests showed that.Went to windows 7 recently, everything is great except the mic recording is also capturing what audio output is going on (ie. the game's sound as well) I played with the nixer settings to death and can't seem to prevent this from happening. All games do it, windows sound recorder, audacity etc.I noticed there is a stereo mix tab and it has it's own recording volume which I have as muted and its recording level down to zero. This is with the front mic port but I've tried the back and same thing. This isn't an expensive headset, but again it worked great in xp. If the cables were gone it would be scratchy, not pick up the audio output. But I have a backup of this headset and tried it but the same thing.I don't have the speakers plugged in, but thought maybe the headset was 'bleeding' somehow and the mic was picking it up, but with just the mic plugged in alone it still records the audio output of whatever is playing, so it's not somehow picking up what's coming out of the headset itself.
I realize the title happens frequently in general. I myself have had to go in and restore the device countless times on reboot. That's not the issue (default device, device enabled, etc).For some mysterious reason, my What U Hear is malfunctioning and picking up absolutely nothing as of last night's reboot. Prior to this for the last few years since being on Win 7, I've had no issues (other than the common restore the default, enable it, etc).
1. I had a power outage mid day yesterday. I'm pretty sure I didn't attempt to use my What U Hear after this outage, but DID use it just prior to the outage (but was not recording or anything when the outage hit, but SF 9.0 was open)
2. I have gone into the BIOS and disabled HD Audio (since my MOBO has onboard)... I really thought this second one was going to fix my problem, but no.
When I go to check my devices in the audio pop-up, it shows my speakers as the default playback device and the oscillator goes as I play something. When I look at the recording tab, with the What U hear device enabled & defaulted, the oscillator just sits there dead. When I go to properties and either select "default playback device" OR select my external speakers (both of which should be the speakers, WHICH DO oscillate and work just fine) it doesn't matter... What U Hear still does not pick anything up!
I want to share screens with my friend on Skype so that he can hear both what is on my computer and what I'm saying on my headset.Basically, I need to record from two audio sources. Is there a 3rd-party program or something that would combine two recording sources into one so that Skype can use that as the audio input?I know I can have my computer "Listen to" my microphone so that what I say comes through the Stereo Mix device, but then I hear my echo, which I don't want.I'm on Windows 7.
View 1 Replies View Relatedget my sound recorder reliably working. Each time there is a hassle to get it back running and sometimes it never finds a recording device although my laptop has a soundcard with stereo mix and an internal mic. I had both already working, recording from Stereo Mix and recording from Internal Mic., but I often have to re-estavblish a setting. Rt now although I select any recording device itll give me ano device found� warning. If I plaback a file everything works fine, but the Sound Recorder can�t record it today.
View 9 Replies View RelatedI have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View Relatedright, you know where you can adjust the sound volume, you know, in the bottom right corner by the time! well, whenever i go to change the volume, i often get a window pop up that says 'not responding'
View 4 Replies View RelatedI have some technical difficulty in fixing the Realtek Driver. I recently bought the ASUS P8P67 motherboard (BIOS version 1204) and installed the provided Audio driver that came with the box which is version 6.0.1.6196. Other specs displayed in Realtek info page is
DirectX version 11.0
Audio Controler : HD Audio
Audio Codec: ALC892
I am running Window 7 Ultimate on x64 bits with the Sandy Bridge i7-2600 core. Noise Suppression and Acoustic Echo cancellation are disabled.
My problem with this driver is that from time to time, the volume on the Realtek mixer drops down immediately as shown on the screenshot.
Also, to certain programs that I am using, like Battlefield 2, the volume keeps resetting to very low even though I set it to volume level 28 before I closed the program. When I stop the recording or I closed the Midomi website (from screenshot), the tab drags back itself to 28 for iTune and the music played back at normal volume
How can I disable Realtek from keeping resetting my volume to low for the programs that I am using? Is this a bug? I tried reinstalling it did not fixed the issue. I tried putting the system volume to 28, and tried recording but the bug still exists.
I tried looking around the forum, but it seems to all point to the BIOS. My BIOS has been cleared which indicated clearing it again will not fix the problem.
Running windows 7 64-bit. Having trouble with opening my volume mixer. Does not open at all from taskbar or when i try from control panel>sounds. Ive tried looking up this problem on google, but I can never get mine solved. My speakers and headphones still work, but i need to take out the usb from the headphones each time i want to switch where the sound comes out from. Ive tried restarting my comp. Also validated files in sys32 folder from admin cmd. I just dont want to have to run a system restore to open this up.
View 3 Replies View RelatedMy sound mixer was working fine, then all of a sudden one day it stopped working. I have no idea why. i dont know if its a software issue or hardware issue. the mic is disabled and the sound mixer is enabled, i disabled it and reenabled it and it still didnt work, i went into the properties and everything is where it should be (volume, ect) i checked the actual mixer down by the clock and that sound was fine on everything to! the speakers are working video is working so i dont think its any of my cards and i hear the audio fine, theres nothing wrong otherwise. i feel like maybe its muted somewhere bc when i tried the mic that didnt work either.but i looked in every possible spot i even tried to update the drivers but nothing needed updating.
View 6 Replies View RelatedLine In doesn't show up in the Volume Mixer 99% of the time (if I reboot the machine it shows up, but its not always practical to reboot it)
View 9 Replies View RelatedI've searched around on the net for anyone else that might have this problem, but no luck. The program is a game called Shores of Hazeron, the sound works fine, apart from the fact it isn't showing up in the volume mixer, and the game doesn't have any volume controls in its in-game settings. Which can be a bit annoying when you have the rumbling of a starship in your ear when you're trying to listen to music.
View 1 Replies View RelatedMixer device free download?
View 1 Replies View RelatedI have a Toshiba Satellite A665-S6086 laptop which had to be re-imaged back to out of the box status. Before the re-imaging, the Realtek audio controller had a mixer panel in its device manager, and on the system volume control, that allowed me to record from the mix of audio going to the speaker (labeled "stereo mix" ). Now, I find that the ONLY recording device that EXISTS is the physical built-in microphone; I just recorded a streamed radio program, and it was basically recording the room noises and, very faintly, the audio from the speaker. That was how I discovered the change in software environment. I have tried downloading the driver from the recovery partition; it installs but does not correct the problem. I have tried uninstalling both audio devices and letting them reinstall on restart. I can play audio to the speakers, but not record the audio internally.
View 2 Replies View RelatedIt just happened out of nowhere. My sound was working fine last night, then this morning I played a video and there was no sound. I clicked the volume icon in the task bar to see if I could hear the 'ping' when you adjust volume but it repeatedly froze and crashed (it's still doing this now after rebooting). Sound in control panel also crashes first thing when I try to open it. I want my sound back.
View 2 Replies View RelatedMy computer has Realtek HD audio. In my previous installation of windows 7, the tray volume icon would show several audio outputs at once. For example, if I clicked the volume icon it would have have a volume control for the Speakers (rear audio out), the headphones (front audio out), and the HDMI audio that my GTX460 sends. Now, I can only get one of them to show at a time. What's going on?
View 1 Replies View RelatedUpon Windows startup, I hear music/noise/interviews (Sometimes two completely different sounds at the same time) Under the title "Windows Media Center Diagnostic" in the mixer.Just wandering how to get rid of it. It's getting increasingly annoying. I listen to music through the Line-in which is why the levels are the same as the "Windows Media Center Diagnostic".
View 6 Replies View RelatedHow can I use 1 sound mixer or level for all the applications in win 7. One master control volume sort of thing for every application?
View 2 Replies View RelatedMy sound mixer is not remember the settings I give to individual programs after they close and reopen. Say a game for instance, if I put the volume to 20% in the sound mixer and then exit the game, then go back on the game and check the volume in sound mixer.Instead of it saying 20% still and remembering it resets the volume to 100%.
View 8 Replies View RelatedI have been giving Voiceovers a go and have been told that I need both my Alesis Miser as well as an Digital Audio Interface. My Mixer has a built in preamp and plugs directly into my computer by the use of an USB cord. My Alesis Mixer also has two XLR ports for my Studio Condensor Mic. But I am told the outcome is not as clear as it would be if I now ran out and purchased an Digital Audio Interface and/or a better sound card. The Sound card I am using is merely the ON-BOARD sound card that came with the machine.
View 9 Replies View RelatedThe sound card I am using is a SupremeFX-X-Fi that came with the Asus MB. I am running a dual boot system with Xp Pro SP3 and Windows 7.As per Ulrich's on the Asus forum I d/l'd the 64 bit sound driver set for the Rampage Extreme MB. I unzipped them and used the "AsusSetup" icon to install. After the installer ran it wanted a reboot so I did that. Then I got another message asking if I want to run (x86)analog devicescoresmax4pnp.exe to which I agreed. Nothing happened and there was no reboot required.Then using the MB CD I installed all the Creative Stuff. NOW I have the "SoundMax Integrated Digital Audio Volume Panel" in my tooltray as I do in XP but it doesn't do anything.
When I choose MIXER I get " No Supported audio device App will close"When I choose Karaoke Player "Audio device for this app not detected."When I choose Console Launcher " No supported audio device available close app."When I choose Audio Console " Device supported by this app not detected close app."So in effect, I am no further along than I was with the default Windows 7 driver settings.I don't know why I had to register the SoundMax card or software if it won't function!I even tried a re-install of the drivers themselves after I had all the Creative stuff installed and that did no good. I am back to square one with it all <sigh>What to do now? The SoundMax HD soundcard shows up in Device Manager so it clearly knows it's there and yes I have sound but only at the most basic level. I need control of the bass and treble at the very least.
The Volume Mixer in Windows 7 is supposed to show applications that are running sound, right? Well, mine shows some applications,like Firefox and Guild Wars 2 and Mozilla Thunderbird and KMPlayer. But it doesn't show volume for other applications that use sound like Winamp and ePSXe (playstation emulator). I'm playing Final Fantasy VIII on ePSXe and the game doesn't have a volume control itself for, say, music and/or sound effects. And I'd like to be able to turn down the sound on the emulator game so that the game volume doesn't intermingle with my music in the background played by Winamp.Is there a way I can add these applications to the Volume Mixer? Or, alternatively, is there a freeware/opensource program that will allow me to adjust the volume of individual programs?I am new here so hopefully I have done everything right. I was going to try to list my system specs here in this thread but I followed the link at the top of this Post New Thread page and filled out my System Specs according to the walkthrough.
View 1 Replies View RelatedIs there way to adjust treble/bass globally in win 7?
Other than volume, I can't seem to find a something similar to iTunes which can help fix my sound quality.
I have cheap desktop speakers and a mini subwoofer -- the bass needs to be turned down.
Conexant High Definition Audio my sound's driver...
my laptop : ACER aspire 4253
So i got a problem and i cant reslove it. its about the stereo mix .the problem : i think (not sure) that i enabled the stereo mix by Fraps (recording program) where there was a recird Windows 7 sound > stereo so i checked it and then i couldn't talk anymore on the mic that i have. I knew that my problem is stereo mix because when i open the ts and try to talk they hear waht my computer is doing (playing music .. etc...) I tired to put show disabled divices and show disconnected devices but it didn't show up to disable it Tired to install the latest version of my sound card which is : High defenition audio but it didn't show up tooTried also to unistall then install .. the same didn't show up..
View 4 Replies View RelatedFor some reason, awhile back, I used to be able to record with Stereo Mix on Audacity, Hypercam, even to other people on Skype. But all of a sudden, out of nowhere, it just stopped working. There was a time where it said it was unavailable, but now it says it is working, but when I try to record sound using Stereo Mix, it either doesn't record the sound, or the program doesn't recognize that Stereo Mix exists.I have "Realtek AC'97 Audio for VIA (R) Audio Controller" under my Stereo Mix properties (I'm guessing that's like the driver or audio device name). When I try to record in Audacity, I get a message saying "Error while opening sound device. Please check the input device settings and the project sample rate." The input device (the Realtek AC'97 I'm guessing) says it's "working", and the project sample rate is the exact same as it says in my recording settings. My guess is that Audacity doesn't see "Stereo Mix" or "Realtek AC'97" as a device currently on my computer, which doesn't make any sense, cuz my computer says otherwise. It also doesn't make sense, because I'm able to select "Stereo Mix" as a device for recording IN Audacity itself.
I've read other posts about this problem, and none seemed to be of any help (I've tried the solution posted but didn't fix it). Is it because my "Stereo Mix" isn't set up to my speakers or something? Is it because I have Realtek AC'97 and not the HD one? Could it have something to do with my current USB Microphone (which that seems to work just fine for recording)? I dunno, like I said, it "used" to work, but just suddenly, out of nowhere, didn't work anymore.By the way, It is set as the default device, and is enabled and says it's "working". It also does not have any green bars next to it (or lack thereof), and in the properties, I do not see a "listen" tab.
Ive tried all the methods to make it available ND NOTHING WORKED.
View 9 Replies View Relatedi have Toshiba Satellite L635-S3020BN notbook. i have latest amd high definition audio device driver but still i dont have stereo mix . my stereo mix is not disabled i checked it. i only have microphone Conexant CX20671 SmartAudio HD as my recording device.
View 3 Replies View RelatedI just bought ASUS Xonar DS to make my HTPC connect to Samsung HT-Z210 Home theater System via Optic cable (TOSLINK).I can Play DVD with out any problems with sound.
View 9 Replies View Related