Multiple Networks Results In Loss Of WAN
Aug 14, 2012
Lost my WAN. I am troublshooting router/ modem issues so I am direct connected to my modem bypassing my router. but to maintain my LAN for sharing I am using a wireless dongle as I only have one ethernet port. as soon as my wireless is connected Windows 7 drops internet from the ethernet. even if I have net then merge the connections. I just had a fresh install a few weeks ago, nothings been tweaked cuz for the most part it works.
h/w:
Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
Asus USB-N53(drivers installed only, no utilities)
Asus RT-N56U Router(not the one with issues but a temp LAN router for future replacement)
s/w: Win7x64
View 1 Replies
ADVERTISEMENT
Jun 28, 2011
just came over from XP Pro...had to get a 64-Bit machine; & went w/ an ASUS running Win7 Home...which I upgraded to Pro.I began to lose my internet connectivity, intermittently & noticed that, when it happened, the Network icon in the task bar showed TWO networks...(???).one labeled 'Network - No Internet Access'& the other labeled: 'Unidentified Network - No Internet Access'.Sometimes the problem would go away if i rebooted, but eventually it became a permanent dilemna.Verizon checked my modem...said it was fine, but sent me a new one anyway. Same problem continued. Took the PC back to Best But & swapped it for a new one...& it's been fine 'till this evening. It denied me access once.I rebooted; & got it back. Obviously, something is amis w/ Win 7 Pro in the way the network connection is set up.can't be two modems or two computers.I noticed it seems to happen right around the time that the OS goes looking for windows updates not in the same category.
View 1 Replies
View Related
Nov 13, 2009
I recently have a problem with my network connection. It shows me sometimes that i have mutliple netowrks, one of them says Unknown network.. When those 2 are togheter in my network and sharing center, my internet connection is lost. If i disable and enable my network connection the internet is working and that unknown connection is gone. Anyone can help me with this one? It is kind of annoying to do that thing everyday.
View 4 Replies
View Related
Dec 21, 2011
I would like to be able to use 2 networks at the same time, one is a wireless internet connection through my USB adapter, and the other is a wired Ethernet connection to separate router, which i use to connect to a Playstation 3 with Playstation Media Server. Frequently I am wanting to download a video from the internet while watching a different one on the PS3. he problem is when I connect both networks, I am unable to use the internet.nd what I have learned.
1. I made sure that the two networks have very different IP addresses and Default Gateways.
2. I have tried to change the priorities of the networks through Control Panel>Network and Internet>Network and Sharing Center>Change Adapter Settings. Then right clicking the connections, clicking Properties, clicking both Internet Protocol Properties (one at a time), clicking Advanced, un-checking Automatic metric, and placing my own values. Obviously i set the wireless to the lowest priority and the wired higher.
3. Also in the Network Connections list, pressing Alt, clicking Advanced, then clicking Advanced Settings; I set the order of the connections, wireless first, then wired.
(Also I did reboot the system after trying each thing)Going to command prompt and typing "netstat -rp", under Interface List I am shown the metric priorities of network devices.It seems no matter how I try changing priorities or access orders or anything, those values do not change. I am thinking if the priority of the wireless adapter was first, I would be able to use the internet while connected to both networks, and still be able to stream to the PS3 through the wired connection.
View 2 Replies
View Related
Feb 24, 2010
i'm running Windows 7 on my laptop and i am using mobile 3G modem as an adapter to connect to Internet. The problem is when i am connect the NIC to my DLINK router, the Internet connectivity become lose where Network and Sharing center stated that there is Multiple Networks with no Internet access. FYI, my DLINK router is not connected to Internet but Mobile 3G modem does connected to internet.This is my result of ipconfig /all
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersai>ipconfig -all
[code]....
View 4 Replies
View Related
Aug 23, 2009
I'm running Windows 7 64 bit on a computer I built with an i7 920 CPU on an Asus P6T motherboard and 6GB of DDR3 ram. Every time I try to connect via Cat 5 wired DSL connection it adds an additional "Unidentified network (public network) and lists "Multiple networks under the middle icon on the Network and Sharing Center with a red X between that and the Internet. I have tried everything to get rid of the extra network but nothing has worked. It initially worked fine, but after getting a "critical update" it began to do this intermittently, now it does it all the time.
View 6 Replies
View Related
Jan 15, 2013
I had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."
Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.
How can I lose my Windows activation?
View 4 Replies
View Related
Nov 13, 2011
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies
View Related
Feb 13, 2013
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
View 2 Replies
View Related
Dec 13, 2012
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
View 5 Replies
View Related
Sep 7, 2012
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
View 2 Replies
View Related
Sep 28, 2012
Brand new computer, upon installing Windows 7 could not boot into windows due to missing file errors. The HDD I am trying to install onto is a SSD, I will provide system specs at the end of the post. Anyway I unplugged my secondary SATA hard drive and then I was able to install Windows 7 and boot into windows.Now after all my drivers have been installed I am recieving error messages when logging into Windows. I ran SFC.exe and the log output gave me hundreds of lines saying Cannot repair member file. Here is an example:
2012-09-27 20:28:38, Info CSI 00000116 [SR] Cannot repair member file [l:24{12}]"fpcmbase.sys" of avmx64c.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
[code]....
I have tried re-formatting again only to have the same issue. Maybe it has something to do with me trying to install onto the SSD drive? I have not yet tried installing windows onto just the SATA HDD I have and disconnecting my SSD.
System Specs:
Intel Core i7 3930k Processor
ASUS P9X79
32GB [4GB x8] DDR3-1600 G.Skill Ripjaws X
NVIDIA GeForce GTX 670 - 2GB - EVGA Superclocked - Core: 1046MHz
240 GB Corsair Force Series GT SSD
2TB Hard Drive 7200rpm
View 1 Replies
View Related
Oct 29, 2010
I tried to run this simple copy batch file and get no results. copy "c:aquariumaqrabases*.*" "N:"
View 4 Replies
View Related
Nov 24, 2011
i have a homebuilt computer, ASUS P6T6 mobo with 6x2 GB of RAM, Intel Core i7 CPU. i ran memtest86+ 4.20 and observed the following: although all 6 2 GB memory sticks are seen and listed on the memtest screen, it says i only have 8 GB of total memory. yet, when the tests were run, instead of going up to 12 GB, or stopping at 8 GB, it tests up to 9216 MB and then goes on to the next test, in every case. also, given that no errors were reported up to 8 (actually 9) GB, can i assume that the problem is in sticks 4 or 5 (or the corresponding slots on the motherboard)?
View 1 Replies
View Related
Jan 8, 2013
I build my own PC's, desktops anyway. This isnt my first try at burning DVD's.This started about 10 or so days ago. I drag and drop the avi to Win DVD Maker . I can watch "Preview" and get sound everytime. Hit "Burn" and when everything is finished , I play the DVD to test it and NO SOUND ! Almost all the video files I burn to DVD are avi. I have done this hundreds of times. This is a new and recent event. I tried to google this and I see a bunch of the same trouble back in 2009 but nothing recent. Im running Windows 7 Pro 64bit. Im tempted to run system restore. Before I do this I wanted to see if anyone has any answers. Please dont suggest imgburn or Nero or any other software. I want to know what happened to my system as it sits. [code]
View 4 Replies
View Related
Oct 20, 2011
i have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results.
View 9 Replies
View Related
Sep 15, 2011
Can't see how to sort the results of a "Windows Search" - the search you launch from the Start button, not the search you do in Windows Explorer. I've tried menus, and right clicking everywhere.
View 6 Replies
View Related
Dec 14, 2012
When searching in windows 7 libraries (in pictures, music etc) the results shown are only arranged in date modified clicking on drop down menu show all other choices (top results etc) greyed out Im using windows 7 build 7601 acer aspire 5332 4gb ram
View 10 Replies
View Related
Sep 29, 2011
I went thru this with Vista, don't remember what the solution was..when search for a file by typing file name (or partial file-name (or extension)) in search field in folder window.. the results don't tell you where the files arewhat is the purpose of a search functionality if results don't display file-locations???I think in Vista I was able to tell it what cols to display in results (and I think there was one that displayed locations.. why it doesn't default to this I cannot fathom, but well...;-) but don't see how to do this in Win7
View 1 Replies
View Related
Sep 30, 2012
I've been having this issue for 2 days now, and it is happening on IE9, FF, and Chrome. It does not happen with every webpage I navigate to, but it sure is a lot of them. (freelancer.com and techguy.com are prime examples). Sometimes they will load. Sometimes it will show up "Web Page Not Found". Other times it'll pull up the Yahoo! Search page as if I were searching for it (which i clearly typed in Freelancer.com - Hire Freelancers & Find Freelance Jobs Online). Things I've tried so far: Resetting my router. Resetting my modem. clearing all cache and cookies on all 3 browsers. Clearing any registry errors. Running CCleaner. Flushing my DNS settings again. Nothing seems to be working. I have my internet (cable modem, running 18-20mbps) direct connected to my Playstation 3, and I have 2 desktops connected, issue does not seem to be happening with the PS3, but both desktops are experiencing the issue. Both running Windows 7 Ult 32bit OS.
View 1 Replies
View Related
Aug 13, 2010
When I go to start. and type something in the search box nothing comes up. If i click on see more results i get this message " Windows cannot access the specified device, path, or file. You may not have the appropiate permissions to access the item." When im the administrator. It was working fine just a few days ago. Just happened.
View 5 Replies
View Related
Jan 22, 2013
I've been having issues with the speed of my computer, it isn't a virus, I know this. So I've been looking into it and on CPU-z my ram is at 665 MHz and my cpu is at 3392 MHz My ram should be at 1600 MHz and CPU should be at 3200 MHz?
View 4 Replies
View Related
Jan 18, 2012
When I switch my laptop on lots of Window Search Boxes appear, which say 'Search Results', 'To begin, type in the search box'. It doesn't happen every time I switch the laptop on just sometimes. I've had a look at the keyboard and no keys seem sticky. I've done various virus scans etc. I've also done a system restore to a few months back and still nothing.
View 7 Replies
View Related
Jan 19, 2012
When I switch my laptop on lots of Window Search Boxes appear, which say 'Search Results', 'To begin, type in the search box'. Any idea why this is coming up? It doesn't happen every time I switch the laptop on just sometimes. I've had a look at the keyboard and no keys seem sticky. I've done various virus scans etc. I've also done a system restore to a few months back and still nothing.
View 2 Replies
View Related
Jun 29, 2009
I'm not sure if it's a W7 issue or not but I never had this problem with XP.
Alt tabbing to desktop from a running game is causing the black screen problems since my install. I am unable to get back to desktop or to the game after doing this. It happens in these games:
Crysis
Farcry 2
CountersStrike Source
Team Fortress 2
Anyone got a solution for this problem?
View 9 Replies
View Related
Sep 12, 2011
A few days ago the search function in the Start Menu stopped working. Following instructions on a post on this site, I changed the value of an HKEY (can't recall which one any more) and it started working again. However, the results are now always incomplete. For example, I might type "ABC .xls" in the Start Menu bar to search for an Excel file called ABC. The immediate search results would be empty. However, if I click "See More Results", a window opens in Explorer and the search returns a hit.Because the search function in Explorer works fine, I think the indexing function is working properly. However, I rebuilt it anyway and the results are the same. why the search in the Start Menu produces incomplete results
View 5 Replies
View Related
Mar 31, 2011
I don't know why Microsoft made this so difficult in Windows 7 / Server 2008..I use the Windows Advanced search to find files containing a certain word, it pulls up a list of results... I can "select all" and I can do things like copy them to another location, but I CAN'T find a way to delete these files!!If I click the DELETE key while they are all selected, nothing happens. It's not allowing me to drag the files into the Recycle Bin.Am I missing something here? It seems that all options that are normally available when right-clicking on file(s) are present in the right-click menu (open with, send to, create shortcut, etc) EXCEPT for cut or delete.
View 2 Replies
View Related
Nov 4, 2011
I am experiencing some problems with my WINDOWS 7 64bit system, it begun last night by FREEZING at random (e.g. surfing web, watching videos or playing games) fallowed by the all mighty windows BLUE SCREEN. I tired to view the minidump files using Win-Dbg but there is some problem with the SYMBOLS reading.......I can roll back my OS with SYSTEM RESTORE but......
View 4 Replies
View Related
Nov 5, 2012
i have recently had a crash dump file appear in c:windowsminidump.i am uploading it here, for those who my wish to review it.however, i cannot specify what the cause of thes problem my have been.
View 3 Replies
View Related
Dec 10, 2011
I just started having BSOD's very common once a day. I haven't changes any hardware, so I believe it is software related.
21011-26301-01.dmp
View 9 Replies
View Related
May 8, 2012
Under Windows XP I used a program called Piky Basket which had a right-click feature that allowed me to copy the full paths of selected files to the clipboard. This feature worked on multiple files, even in search results from e.g. Windows' own search utility and e.g. Voidtools' Everything. I want to be able to do the same in Windows 7.Sadly, Piky Basket does not work on my system (Windows 7, 64), and the version of Piky Basket that does work on my system doesn't have this feature anymore.The built-in "Copy as path" in Windows does work on multiple files, but only if those files are all in the same folder (which is not the case in search results). The same applies to SendTo Toys -- can only copy multiple paths if they're all in the same folder.
Dengdun's OpenXX works fine on search results, but copies a maximum of 15 paths (why???). Jarle Aase's CopyPath copies only one path at a time... and this applies to many of the nameless similar utilities floating about the web.Ninotech Path Copy insists on installing the 32 bit version of it (even if I remove the previous version), and does not add anything to the context menu that I can see.
View 3 Replies
View Related
