If I multiselect 2 folders and copy them to a destination across the network vs select the same folders separately to copy to the same destinations (2 copies), the time difference is unbelievable. Sometimes I cannot always mutliselect them (different folders). Is there any way to make it copy faster?My guess is Windows 7 is throttling between the 2 processes making it like 5x as long.I know I can do one copy, then the next, but sometimes I want it to be done at one time (I'm not sitting there watching it).
I'm running Windows 7 64 bit. When I got up this morning a program (WinMHR) that scans processes and files for malware, reported 4 copies of explorer.exe as infected. I always thought there should only be one copy of it. I also did a search for explorer.exe in Everything. Here's a screenshot: 1305909911-clip-117kb.png clip. I actually shows 20 copies of it. I was running an online backup with Digital Lifeboat that I was concerned about, so I rolled back with Rollback Rx hoping to remove these copies of explorer.exe, thinking Lifeboat had something to do with them being there.
I have my default printer, an HP Laserjet 6P hooked up to a Sunix parallel port on my PC. I can print from this printer from any application just fine. The problem is that, over time, maintenance across printers has caused multiple copies of this 6P to appear in the printer drop down list - but not one of them shows up in Devices and Printers!Case in point: I installed the SP1 upgrade with no real trouble. I did find, however, that I had to reinstall my Canon Pro9000 XPS driver. This was painless, but when I did it it automatically made itself the default printer. So in wanting to revert back to my 6P I... could not go to Devices and Printers because it doesn't show up there. I had to Install a New Printer, whereupon it found my 6P just fine and used the available driver. But now it's Copy 4! And it and none of the others show up in Devices and Printers.How do I get this printer to show up in D&P (any of them!), and how do I wipe these "extra" copies from Windows 7?
I've recently put up Win 7 x64 as a clean install. Then I D/L V-PC and XP-Mode, all without problems (it's actually from IE in XP-mode that I am posting this).I have a couple of questions about XP-mode:Can I install several XP-mode VMs on my system?Can I run them simultaneously?Would I have to D/L each copy of XP-mode individually, or can I clone the copy that I already have? (that D/L was soo slow...)Note that I want to run the multiple copies on the one machine, not on several different machines.
Environment: 3 identical stationary printers and 1 laptop that's will use any 1 of the 3 given printers at different times.
Goal: to allow the laptop to be switched between the 3 printers without windows creating multiple copies of the same model printer
Problem: each time the laptop is hooked up to a new printer, windows creates another copy of the same model printer in the "printers" list.
I realize there is probably a s/n burned into the firmware of the printers that causes windows to see that it is a different printer (regardless if it's the same make and model). Is there a way to make windows think that all these printers are the same exact printer?
I hate to start with an apology, but I can't believe I'm the first to raise this point, so I'm sorry if it's already been done to death. But I've tried searching the forum, and couldn't find a relevant thread.My issue is this. When I'm writing a new email in Windows Live Mail, like most careful users I like to save the text every now and then. It's an instinct borne of hard experience of losing data, which can happen any time with any software. I just automatically click Cltr-S periodically without even thinking about it.Unfortunately, it appears to me that every time I do this in Windows Live Mail, the program creates a new copy of my current draft email in the relevant Drafts folder. If it's a long email, or one I'm phrasing with extra care, I can end up with maybe ten or fifteen nearly identical drafts cluttering up the folder!This behaviour seemed so bizarre when I noticed it that I trawled through the settings, looking for a way to override it, but I can't find any reference. Am I missing something obvious? I must be.
In Outlook Express (sorry to dredge up that familiar phrase), when you do what I've described above, the software behaves logically, and simply resaves the amended draft email each time over the previous version, so that you never have more than one draft copy at any time - which is how nearly all word processors also work. Surely that's how Windows Live Mail should behave too? I realise there might be occasional instances where you would want two different versions of a draft, but surely these instances are far outnumbered by the times when you just want to save a single copy incrementally as you write it?
Currently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
Is driving me mad, I'm running a Windows 7, 32 bit laptop and have been ripping CDs to copy onto my USB drive to play in the car, I got about 50 CDs copied tonight and transfered to the USB, I tried it in the car and it was fine, had my tea and copied the rest, tried it in the car and only the ones I'd copied before tea will play, plugged the USB back into the laptop and tried to get it to play using Windows Media Player, the message I'm getting on screen shows this-:"Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."
When I pop a DVD in my drive I use WMP 12 to play it and 2 interfaces of WMP 12 open to play it. One has the menu of the DVD on it and it's maximized ready to go and one is just WMP 12 minimized. The minimized one fades out, but that's not the issuue. Why do 2 of them open in the first place? Is it something to do with the fact that WMP 12 has both a 32 bit and a X64 when you're running Windows 7 HP x64? I do have the 32 bit as default with the Windows 7 codec package by Shark.
I got a HP computer that had win7prox86 on it and i want to format it and install the same copy of windows onto different partitions, are there any restrictions with that?
Not sure exactly which forum is best suited for this, but I am using win7 Starter,The past few weeks my netbook has started locking up and needing the battery removed to get it started again. It most often happens in Firefox when writing to the HHD, but not always.I have cloned the HDD to a new Seagate and installed that and the problem continues, so it is not the HDD. I have all current updates for everything here.So, I am thinking it might be one of two things. I have picked up a Virus/Trojan/Worm or it is a hardware fault.I am thinking of buying a new netbook and give up on this one. If I do that, and it is a Virus/Trojan/Worm, there is a good risk of transferring it over to the new netbook when I copy a bunch of data files from my backup USB HDD.Any thoughts on how I can copy stuff to the new netbook without risk of bringing malicious stuff with them?I am thinking maybe copy the files to a Cloud Account then copy from there back to the new netbook. The thinking there is that unless the actual files contain the Virus etc, any other sectors etc on the backup HDD that may contain the Virus code will not be transferred.
My computer crashed several months ago. I have 2 hard drives so I reinstalled windows 7 on my D drive. I also reverted back to an earlier version of the OS which corrected the problem on the C drive. How can I remove the OS from the D drive now that I don't need it. Whenever I boot up it asked me which OS I want to use. I actually reformatted the D drive but it is still asking me which OS I want to use. How do I correct this problem so it only sees the OS on the C drive. I couldnt find anything in the Bios to correct it. I have a Dell Inspiron 570.
I use Windows Live Mail 2011 essentials. I really like the plain Jane Windows Live mail but got ropped into this type in auto windows update. Originaly i just removed it thinking that the Plain Jane mail program would be re-instated but it was not, could not find just windows live mail so had to put it back if I wanted to use email not web mail.Above tells you where I am at as far as email is concerned.Now my problem.I have setup several groups of email messages that I send messages to, as well as to just one person. Suddenly in the last month or so I have been getting reports of some addressees are getting as many as 50 of the same message, orther not. Sometimes they are sent to one of the groups some are not, some are forwards. I have communicated with Cox, my high speed interent access, they tell me use only web mail not Windows Live Mail. I really do not like web mail, but will start using it if I have to. I ALLWAYS send BCC for a message with more than 3 addresses because of emails containing lots of addresses for capturing the addresses for spam.
I recently bought a new Dell machine just before Win 7 was released so it came with Vista. I have not yet installed any other software on the machine other than what it came with. I bought a standalone copy of Win 7 to upgrade from Vista but when I install as an upgrade on my machine I get 2 copies of IE8 appearing in the programs menu listed as:
Internet Explorer
Internet Explorer (64bit)
They both will run independently but I am worried about the future stability of my system and really don't want them both on there.
I tried to Google to find anyone else with the same problem, but the only references I can find are to hackers who for some reason actually want to have two copies running. I do not know why I seem to be the only person with this problem.
I presume that I need to UN-install one of them - can anyone advise which one please and how to do it - my pc IS 64 bit by the way and I used the Win 7 64 bit CD to do the upgrade. I tried a factory reset of the machine and tried to upgrade to Win 7 a second time to check i was doing everything correctly but the same thing has happened.
Also, under control panel I seem to have 2 copies of Java:
Java (TM) 6 update 13 and
Java (TM) 6 update 13 (64-bit).
Is this the same issue - which one should I delete please and how?
I transferred about 300 GB of files onto my EHD - I thought that would free up that amount on my computer but when I go into my computer and click on C drive it is still saying I only have 114 G available out of 582 G which is what it was before I transferred the files onto my EHD. It appears that the files are still somewhere on my computer and need to be deleted, I just don't know where to find them?
How do I select a file and locate all shortcuts/copies of it? I have a personal file on a shared network drive at work. I created a shortcut to my personal file, in order to assign a Keyboard Shortcut to open it. I need to delete the shortcut I created, but leave the original personal file that I have on my shared network drive.
my printer is only printing 1 copy of a document, webpage, excel file, etc.
It doesn't matter what I print, when I select to print, I get the box to change the quantity, but no matter what I put in there, it always just prints one copy.
It will print all the pages of a document, but just 1 copy.
I just downloaded all of the Google Web Fonts and they were each downloaded into their respected folders, so instead of clicking on folder after folder and right clicking after right clicking and finally installing each and every font;
How can I create a command prompt (batch) file so the prompt can search the main folder where all the font folders are, grab any and all TrueType Font files and move or copy them into another single folder?
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 3 RAM: 8191 Mb Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb Hard Drives: C: Total - 476837 MB, Free - 246483 MB; Motherboard: BIOSTAR Group, N68S3B Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
