I've just bought an Acer Desktop with Windows 7 Pro, my MS mouse scroll wheel works on the internet, but I can't scroll down my Favourites/Bookmarks, nor will it work on saved pics etc. where before the scrolling would zoom in/out. It worked ok on my HP/XP set up.
View 4 RepliesI've recently installed windows 7 ultimate and now the scroller on my touchpad isn't working. I've tried updating the driver but it says I've got the most recent update!!
View 3 Replies View Relatedwell the USB selective suspend option I have set to "never" and it dont care, it turns off the drive all the time
I can sit there and the drive will spin up and then turn off every 30-45 min, it spins up and then spins down pretty fast as if it was just work up by me and then it is going back to sleep - I cant figure out what on my computer is waking it up but I dont care I dont want it to even go to sleep in the first place
I dont want the USB drives to ever, ever, EVER! spin down no matter what I dont care about power useage or drive life, I cant effing stand this, when I boot into Linux no problems at all the drive will stay running for hours at a time but stupid effing Windows dont work
I wanted to know if their is a way to disable Mouse Properties to all clients using Windows Server 2008?
View 1 Replies View RelatedI can only wake my PC from sleep using the keyboard. How do I get it to do it with the mouse? My Logitech mouse does not have a power management tab under Properties.
View 9 Replies View RelatedI can't open Mouse Properties in Control Panel. I click and nothing happens. I ran sfc /scannow but it didn't fix the problem. It found some corrupted files which it couldn't fix, but they weren't related to the mouse or control panel in any way I could see.
View 9 Replies View RelatedI have vista 64-bit installed on my dell laptop and hope this is the right forum. I installed it a couple days ago after formatting everything on the hard drive. Now when I right click on my computer in start menu the properties don't pop up. I dislike vista already but is this vista-related? or infected? I don't think so, since I installed it a couple days ago after another virus had infected the system
View 8 Replies View RelatedI think I accidently changed a setting as I was customizing things. When I right click on a program and select properties, I'm no longer getting the window that normally comes up to let you change settings. If I hover my mouse over the Explorer icon on my taskbar, I can see the thumbnail view of that window. But I can't get it to expand.
Any ideas?
I have a USB mouse which works fine when it is plugged in at boot time.
When I then (when Win7 is already up) plug the USB mouse out and 10 seconds later back in again then it is not working any more.
Another USB mouse on another Win7 computer does not have such problems.
i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
View 9 Replies View RelatedI got a new laptop recently (Windows 7 Home Premius SP1), and but there were several dozen updates that wouldn't install. After looking around online a bit, I eventually decided to go to msconfig and change the startup to only boot with windows programs, which solved that particular problem.Now however I can't change it back to normal startup.If I change it back and click apply, then when I go back in the setting is as before. If I just click "okay" and restart with new settings, then it does a selective startup anyway and reverts the settings.
View 8 Replies View RelatedWhen I try to make a selective backup on a plug and play it loads all my files and refuses to let me choose,how do I bring it to heel.Running Windows 7 64 bit on a laptop.
View 2 Replies View RelatedI just upgraded my HTPC and so built my first Windows 7 PC (never had a need to upgrade from XP, believe it or not). So far I am quite impressed but I am having a number of issues with power management. I'd love some help tying all these together so I'll start at the beginning.I've had the machine running for two weeks now. It's an Intel DH77DF mobo, all the newest drivers on it, fresh from Intel's site. At first I noticed the keyboard would become unresponsive after a while -- not even the lights for caps/num lock would turn on (MS Wired Keyboard 600). So I figured it was shutting off the USB ports and so I went into Device Manager and hit the properties for all USB ports and unchecked allowing Windows to shut them off to save power. I then went to power management and turned it on to maximum performance.
Next morning, I wake up and go to hit the PC to put on some music and the keyboard is unresponsive again. (Aside: I have two keyboards connected, the MS one mentioned earlier and a Logitech diNovo Mini for HTPC stuff. There's also an old MS wired mouse attached (which has never lost power, oddly enough).) I restart to bring the keyboard back around -- because unplugging it and putting it in any USB port won't bring it back -- and when I restart, it takes FOREVER. I'm talking 15-20 minutes (when boot after POST takes like 30 seconds). The restart eventually craps out to a BSOD: power driver state failure, error code 0x9F.So I researched that error and most of the advice seems to come to "run sfc scannow" (done, more than once, no issues) and "update your drivers" (already done). I looked in the event viewer for evidence of that crash but don't think I found anything.
I found a page on a registry entry you can make for disabling selective suspend in USB completely, and I've done that, and it says it's disabled under the advanced settings in power management, but, I dunno...my peripherals still die. I noticed something during this morning's restart. I had my work laptop on and it's a Mac, and Finder always shows the devices on the network. During the long shutdown that goes to bluescreen, the HTPC is not on the network before restart, comes on to to the network five minutes or so into the long shutdown, hangs out on the network for a few minutes, disappears, and then BSOD about a minute after that. It's not just USB shutting down, I guess (if I had a SATA device I'd test that too).
Is it possible to command line disable disable USB selective suspend setting? or even regedit it?
[code[]...
I went to check my msconfig today and I noticed my "Startup Selection" was set to "Selective Startup". I certainly do not recall doing this and have been having no problems with my computer so I was wondering if it's meant to be like this? Should I leave it alone or change it back to normal startup?
View 1 Replies View Relatedwhat Hardware to upgrade my system with. But I got a unrepairable error and had to re-install Windows.Basically, I re-installed Windows 7 Ultimate 64 and then loaded a System Backup Image that wouldn't load in System Restore and I was back to square one, with a nice new registry, that was totally EMPTY. I have ALL my files from the last install, in addition to the Windows.old folder.But what do I do with them? How do I get all the right bits in the right places without totally researching every pre-installed app?Or better yet, is there any software that can help me do this? I'm a graphic artist, so all my 2d/3d design & web developer apps need to have their special configs replaced, or I have a year of configuring down the drain (3DS Max is totally different that stock, for example). Also, theres my "Fallout: New Vegas" and other game saves and my special Web Development Browser plug-ins. Oh, I forgot about all my FTP site logins and passwords.Fortunately, I had installed KeePass the day before the crash (when I made the Backup Image too!), so my other Logins/PWs are intact. I recommend all you guys with lots of passwords to manage get this great app. Just don't match the PW file to your current install's User account. I'd be screwed if I had done so.
I guess most the stuff can just be replaced with new versions and I can tinker with them to get it all as it was.I just couldn't find any threads about this particular subject, beyond the basic "How to Load a System Image Restore Image", etc.I was just wondering if there were any options other than dealing with each software install individually.
I have a strange problem I can't get to the bottom of. I have replaced my father's wired modem (he's with PostOffice.com in the UK) with a Belkin Surf+ (F7D2301uk) router running firmware version 1.00.16. When he tries to access the network from his Tosh C660 Win 7 Home Premium, 64bit laptop the network connection between the laptop & router disconnects after a minute or so. The only way to reestablish a connection is to Disconnect and Connect again in the Wireless Network section of Networking panel. But here's the weird bit. My own Mac Book keeps connected fine without any problems as does my Sony Ericsson X10 phone.
View 1 Replies View RelatedI tried to disable a couple of startup programs by checking Selective startup and disables some programs on startup. Now my computer is running funny. When I tried to go back into msconfig and check normal (under general tab) and click apply, it won't save and automatically goes back to selective. I've tried running as admin...still can't change it.Tired restore to an early point....what happened? I'm running Windows 7
View 5 Replies View RelatedI have main PC [office_PC]. On that PC is basically everything. music, pics, videos etc. It is the primary computer but I also have a laptop and a tablet that access that data too. I need/want full access to everything on the office-PC read/write. no problem easily done and I have had no issues currently until today. (64 bit win 7 system)
My daughter saved up and purchased a netbook [Morgan-Netbook] (OS:win 7 starter). I got her on the network and when connected it asked about homegroup so I said yes and now I see her and she sees me. BUT she has full read/write access to everything on the PC. I can access everything I would expect via the homegroup but then under the "network" icon I can see all my shared folders and she has way more access.
I would like her to have read access to pics, videos and specific folders but not necessarily everything else. I have tried adding her as a user in the sharing permissions but my Office PC only wants to see Location as "office-PC" so I cannot choose her from a list to restrict her access specifically. If I limit the access globally then I lose it for me as well. How do I limit access to just her so that she can see the folders we want but she only has READ access?
I've searched the forums and found some similar situations but none of the possible solutions worked for me.
My problem is that my usb mouse is correctly recognized by Windows 7 x64 (no exclamation points in device manager) but it refuses to work, the mouse arrow doesn't moves...
The curious is that the first time I booted into Windows 7, the mouse worked but in the next boots I had to "Deactivate" and "Activate" the mouse in the device manager.
I've already uninstalled/reinstalled the mouse and connected it to the other USB ports (wich I'm sure that works because I can connect pen drives that work flawlessly).
An additional note might be that this same mouse works fine under Vista (is there a way to use Vista generic drivers in Windows 7?).
my laptop mouse isnt working on my emachines.windows 7 so now im using an actual mouse in the usb port.
View 1 Replies View Relatedive recently changed my mobo and CPU and in the first boot the mouse work. Then it suddenly stopped.ive tried moving settings with the bios disabling/enabling legacy support for USB. Ive tried using PS2 mouse and it doesnt work but when the keyboard is plugged, its working..same with the USB, mouse not working but when speaker is plugged, its working[CODE]
View 5 Replies View RelatedMy keyboard on my laptop is not working, as well as the mouse. I pluged in a usb keyboard and a usb mouse so that i may use my laptop. how can i fix this. i ran a system report and this is the outcome.Error Symptom: Device is not present, not working properly, or does not have all of its drivers installed. Cause: A device has a configuration problem that prevents it from working properly.Details: The device, PenMount Keyboard Device Filter Driver, is reporting "tv_ConfigMgrErr24"This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPIPNP03034-75450AE-0Resolution: 1. Verify the correct driver is installed. 2. Try updating the drivers using Windows Update. 3. Check with the manufacturer for an updated driver. 4. Attempt to uninstall and then reinstall the device using Device Manager. Related: Explanation of Error Codes Generated by Device Manager Manage Devices in Windows
View 10 Replies View RelatedI reformatted my computer recently and ever since my Dell BT Travel Mouse is not working. Bluetooth is turned on in the BIOS, and I used driver genius to get all of the drivers needed. It is connecting to the mouse and I can see it in the Devices. That being said I can't actually move the cursor with the mouse.
View 1 Replies View RelatedYou normally left click to access something on the internet but all of the sudden my computer won't do that. I have to right click then go up to click on OPEN and then it works. Using windows 7 pro and this just started over the weekend. How do I get it back to left click to open?
View 3 Replies View RelatedYesterday I got on my computer everything is running fine. Today got on it for awhile and suddenly the USB keyboard and USB mouse lock up. I've tried restarting it and I can't get past the first screen. It says keyboard not present or something around those lines.I plugged in a ps/2 keyboard and it works but my USB mouse will still not work. I've tried going into BIOS and making sure USB was enabled. Tried a system restore but for some reason it wont complete.
View 1 Replies View RelatedI do not understand this. I've been buying and returning 'defective' wireless devices for my media center for the last few months. I bought a logitech wireless mouse (v220) a few days ago and it works on my E6410, E6510, Thinkpad T500, NC6230, and custom amd gaming machine.However, on the machine it is intended for use on, it does not work. It seems to work fine (as far as I can tell) in windows. In media center, bridge, firefox, ect... it just doesn't work. You move the mouse, nothing happens, or it moves very spotty.
View 7 Replies View RelatedI recently had the top cover replaced because of damage done to it during a tuneup and cleaning. Now my right mouse key, on the touchpad does not respond. Using a wired mouse everything is normal. Is there a setting in Windows to correct this, or is it a ribbon not properly connected or similar problem?
View 1 Replies View RelatedI have a Dell Zino HD. After some Windows updates (may or may not be relevant) the mouse and keyboard have stopped working completely. They work for the BIOS and for F8 options but once Windows has started to boot properly, they stop. I therefore cannot log on.
View 1 Replies View RelatedOkay so not to long ago my laptop's touch pad left click stopped working my left click but I didn't care because I used my wireless mouse for games but 1hr ago I restarted my laptop and now my left click works but my wireless mouse doesn't work so now I'm mad since I hate using the touch pad for games since it's harder and it suckswith this problem I think it's going to be a simple fix.I clicked on Devices and Printers, then I see the mouse and I click troubleshoot and it doesn't find the problem it says it's working fine. I tried the FN + F9 and it disables the touch pad and I do it again and it enables the touch pad but not the mouse does nothing the my problem.
View 4 Replies View RelatedI've looked in several forums but didn't find the solution, my mouse was working perfectly (touchpad still working), until I installed a joystick driver, and then it didn't work anymore, it is detected, the mouse emits the light it usually does, and when I go to Device manager, it's there, driver up to date, and "the device is working properly", it says.
View 8 Replies View Related