I need a little help trying to diagnose my daughters computer problem while I'm deployed to Afghanistan. She just recently has windows 7 home premium 64 bit installed. It's been working great for over a month now, but yesterday she said she tried to install a game and she got an error saying she doesn't have enough memory.
I had her bring up the system box in control panel, and it showed her score of 5.2 but next to memory installed it was empty. now we know memory is installed because she's able to use the computer. I know for a fact there's 2 GB of memory. I'm sure it's just a windows thing, but I'm unfamiliar with windows 7.
i have a new samsung laptop running windows 7 64bit.when i first set it up the 1tb hard drive partitioned. that was ok, everything worked fine. a couple of days later i couldn't start windows, no idea why. as it was new and not a lot of files on it yet i reset it to when i first recieved it. now the hard drive shows 2 partitions ,one of 360gb and one of 54mb.
If I place a single 4GB stick in my machine and run memtest, I see it's testing only 3.7GB. I assume this is the PCI memory map taking 0.3GB. Does this mean I'm not actually testing all the memory or am I missing something?
This is a copy and paste of my problem.I haven't messed with ubuntu in a long while, because of this problem. what happened was i had ubuntu dual installed alongside my windows 7. I had grub as its main boot loader. I can't remember if i did the partitioning myself that time or not, pretty sure I did. However, for whatever reason, my grub loader failed once and it caused me to have to reset the mbr via a windows 7 disk. after I did this and ever since, the partitions I had set for ubuntu (a whopping 50gb) have been invisible to me. I KNOW they are there because my windows 7 says that my HDD says it is only like 418 in size. Clearly the memory is gone SOMEWHERE, but the partitions are not visible in either windows' partitioning tool, or when I load up a boot disk and use something like gparted.
My 8GB Kingston Data Traveler is missing 6.09 GB! I used HDD regenerator to make a regenerating flash to repair an external drive, and I hadn't used it since. Now it tell me its only 1.91 GB in capacity , I formatted it with device defaults and nothing it still remains the same.
I have 6GB of ram installed on windows 7 64-bit ultimate. For some reason I'm noticing that the usage will rise past 50%, but I am unable to find all of the used resources. From what I found, I'm using roughly 3.2GB of RAM when I add up all the memory usage under the processes tab.
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100 os: win 7, processor: i7 2.8 ram: 16gb (max it will take) video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
Win 7 x64, all updates. intel core 2 duo E8800. 8gb ram in 2 pairs. Nvidia 9800GT.2x HDD with lots of free space. ESET antivirus + Outpost firewall Every time I shut down the computer, I get an error like this:The instruction at 0x72f151d3 referenced memory at 0x72f151d3. The memory could not be written.Sometimes they will auto close, others I will have to force the shutdown.The thing that seems interesting is that there's a pattern to the memory addresses.When it's a software exe crashing, it's always 0x7xxx51d3.When it's explorer.exe crashing, it's always 0x7xxx87bc.
Ok i have windows 7, Recently i have found out that i have a full list of errors that happened pretty much overnight:Here's the list 1. I can't go onto Control Panel It say's " This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator" I AM THE ADMIN.. I am the only account too. 2. My Task bar is missing, When i go ctrl-alt-del i see no option to open up my task bar. [FIXED] 3. I cant RIGHT click on anything on my desktop, as well as my folders and stuff. Although i can right click while playing games or browsing the internet, so my mouse is definitely not broken. So u must be thinking, this guy has a virus for sure... Well if i do have a virus it must be made by ******* Bill Gates. Because i can't find it.I have the FULL version of Trend Micro Cillin as well as Norton 360, I've just recently downloaded Malvare Bytes, and that couldn't find anything as well. I've done a full system scam on both anti-virus programs, i see no viruses. I did get a virus a week ago, but Norton quickly picked it up, I'm thinking it may have changed a few settings in my computer before i managed to delete it.
So i have 32x Windows 7 I also have 8GB of memory.
My question is how much memory can this architecture actually see? its 32bit, so shouldn't it only see a max of 4? in the my computer properties, it tells me i have 8, but a bunch of programs tell me i have the 3.25.
Do i need to move to 64x? and what happens with the drivers for my custom built pc? will i be able to find them? (most of my disks wont install 32 bit drivers on Windows 7 beta) i cant really do the vista driver backup with driver max, because i use XP
any help? ideas? suggestions? Thoughts? Comments? Wize cracks?
My setup had an MBR issue a few days ago after installing Skyrim. I was unable to repair it using the windows 7 instal disc. I tried the automatic fix as well as bootrec.exe. After giving up and reinstalling a fresh windows 7, my rig has not been starting up properly. It insists on waking up from sleepwhen it was shutdown, i.e. Not sleeping. Well after a few days of this with no other problems, bootmgr can't be found again. Now, when I load the repair disc, it can't find my OS to even try a bootrec.exe on. But, when i go to load drivers the explorer window allows me to browse my c:/ drive and the installation is there. I would prefer to fix rather than reinstall due to a symantec DRM issue.
Windows 7 is on a 60 gb raid 0 setup (I know, i know, i deserve this for running raid 0)
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
i'm using windows 7 ultimate x64 with a galaxy Geforce 9600GT.
i have 8GB of ram .
on dxdiag under display tab
it says approx total memory: 4096MB.
WOW!!
my GPU is only supposed to have 512MB not 4GB!!! Is this for real?does it actually work and would i notice any improved graphical performances? also is it possible to reduce or increase that number?
I currently run 2 x 4GB DDR2 800MHz RAM in my Windows 7 64-bit PC (C2Q 9450, Asus P5N-D).
I have come upon another 2 x 4GB DDR2 800MHz RAM (of different brand) and was wondering if I add it to ake a 4 x 8GB config, will I see any significant improvement in what I do?
What I do is:
Play World of Warcraft (including the upcoming expansion) Play Dragon Agerigins (occasionally) Download newsgroup files using Newsleecher app Multimedia on the web (surf)
For the past few days, my computer, which usually performs well, has started becoming very slow and freezing. When I open Task manager, I notice that the user SYSTEM always consumes a lot of memory (about 1000 MB), slowing my system down to a crawl. The guilty process is nearly always svchost.exe (service-SysMain; PID-1948;Description-Superfetch).
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 3893 Mb Graphics Card: Intel(R) HD Graphics, 1722 Mb Hard Drives: C: Total - 59898 MB, Free - 5671 MB; D: Total - 138978 MB, Free - 119817 MB; E: Total - 138978 MB, Free - 132177 MB; F: Total - 138980 MB, Free - 64663 MB; Motherboard: Intel Corporation, DH55PJ, AAE93812-302, BTPJ045000ZM Antivirus: Kaspersky Internet Security, Enabled
I have a problem at hand. Use Windows 7 Ultimate 64bit on a pc with quad-core 2.4, 4gb ram, until so good, but when I go in the properties panel, my windows says I have 4gb but I can only use 3.24 gb why does not he is using it?
I am getting the error message " out of memory" whist in some programs. the explorer now and then shuts down and re starts . all sorts of funny things I have 6gb ram the hard drive makes a running noise far to long on stratup yet the start up files are minimul