When I deleted my Microsoft Mouse driver, the screensaver came back on. when I installed it, the screensaver turned off after a while. It may also be stopping me from hibernating my computer as when I click on hibernate, it blacks the screen and then locks the computer
View 1 RepliesWindows 7 x64 vx-6000 initialization error
Final windows 7
Tried everything found in the searched topics, reinstall drivers, use another webcam (logitech) manually load the inf file (from the Lifecam 3.0)
Nothing
black screen and Unknown error Skype says
black screen and initialization error Microsoft lifecam says
I think the problem for 32bit is solved but not for 64bit !!!
I want the screen saver to load after 20 minuets. But currently after 20 minutes the power saver of the screen is loading instead...
View 5 Replies View RelatedLately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View RelatedHow do I adjust the Time between Mouse Movement, and Start of Screensaver, requiring Password??
View 2 Replies View RelatedHow do I adjust the Time between Mouse Movement, and Start of Screensaver, requiring Password??
View 1 Replies View RelatedI don't know if it's a file error, or what. But every time I click on the Disk Cleaner, my mouse says something's loading but nothing ever comes up. I've tried running the Disk Cleanup location (C:WindowsSystem32cleanmgr.exe) and other ways to try and open it. Yet, it's the same thing every time I click, nothing comes up. Is there a solution to this? Do I have to re-download the file?
View 1 Replies View Relatedmy mouse loading animation (the blue circle) keeps randomly appearing at 30 second intervals for no reason. Is there any way to stop this or disable the animation? Its rather annoying when im gaming and it randomly appears.
View 3 Replies View RelatedI like to use my mouse on the left side even though I'm a rightie, so I have the primary buttons switched. Unfortunately, Windows 7 loads that config almost at the end of the boot up process, which of course is annoying if you're trying to click on a few things while the boot finishes (and not knowing which button to use
View 2 Replies View RelatedAll of a sudden I cannot open CCC. The mouse flickers like it is loading it and then nothing occurs. I have uninstalled ATI 12.4 fully and drive sweepered it and reinstalled and still have the issue.
View 9 Replies View Relatedi cant click on my desktop. i had downloaded something to do with dj-ing and then clicked on it. but it started loading.. (my mouse) and it hasnt loaded. i cant click on anything on my deskptop.
View 3 Replies View RelatedJust upgraded to windows 7 ultimate and when i restart, my normal microsoft usb mouse works in the bios until windows starts loading all the drivers from sys32. I used gpedit to disable auto install and uninstalled all of the usb drivers also gives me a code 19. where can i just find a generic usb driver or something.
View 2 Replies View RelatedI have a Microsoft Habu mouse and although I have the most recent drivers and Software installed it just doesn't feel smooth even when not running a game.
View 8 Replies View RelatedMy microsoft sidewinder mouse suddenly stopped working, it will not respond to anything. It lights up and shows the dpi counter and everything else but doesn't work on my pc or any other pc I have. The drivers I could find are installed but still no response. It shows the device but doesn't work.
View 3 Replies View RelatedRecently a friend of mine gave me a Microsoft Basic Optical Mouse v2.1 because mine broke and I was in need of another mouse.The first day I used it everything was ok but then Windows 7 started giving Unkown device message and errors.I can fix it but only temporary by plugging out the battery for 15 minutes after boot the pc the mouse will work but if the cable will be moved a bit,I will get unknown device message.
My System Specs
Acer Asprie 5738G
Intel Core 2 Duo T6400
Nvidia GeForce G105M
Windows 7 Ultimate x64
250GB HDD
Can't believe what you read nowadays anymore. I bought a Microsoft Wireless Mobile Mouse 4000 to replace an ailing optical laser mouse that's on its last legs, and on the package it said that one "AA" battery would last for one entire year without replacing. What it meant was, it would have took until the next spring before it's time to replace the battery.Apparently, the mouse doesn't think like that, it appears, and when I was looking down at it, there was a red warning light indicating that the single battery had already been exhausted from use. Between surfing the web and playing some Team Fortress 2 now and then this is more than just a "mobile" mouse.
View 3 Replies View RelatedI have lost my usb dongle of wireless mouse and keyboard.
View 1 Replies View RelatedI was surfing on the net with my laptop when suddenly the cursor didnt move. I tried to unplug the mouse's usb and plug to an other usb gate but it still didn't work. Then i tried to plug it in my desktop computer and it worked!!! Any idea what happened to my laptop?
View 1 Replies View RelatedI just bought a Microsoft Bluetooth Notebook Mouse 5000 and it works fine when connected but it disconnects when my computer is idle. Once disconnected it is not recognized again when I start using my computer again. To get my computer to connect to it again I either have to restart or delete the drivers and reconnect the mouse. Is there a way to change the bluetooth settings so that it doesn't "sleep" after a period of time? I dont know if that is the problem but I cant think of anything else. I'm using the mouse on my desktop outlined in my system specs.
View 1 Replies View RelatedIm using a microsoft wireless mouse wheel to scroll through web pages on IE9 and win 7. I set its speed to the lowest possible in control panel and it works fine.
When i restart my laptop, the speed is back up to full when i scroll, but when i check in control panel >mouse settings, the speed shows that its still set to the lowest setting. I move the slider, click apply and it works again.
how i can get my mouse wheel speed to be consistent between reboots?
I have an issue with my P8P67 PRO (Rev 3.1). Mouse but mainly keyboard (both Microsoft) are not detected during the cold boot from time to time, i suspect the BIOS is the one to blame i have the latest version, what can i do?Both are USB.When i turn on the PC from time to time a long beep takes place and a message during posting (no keyboard detected). Sometimes happens sometimes not. PS/2 ports didn't work for me, when im using them NOTHING gets recognized (and yes i turned off the PC before plugging them).
View 9 Replies View RelatedI just bought a Microsoft wedge mouse and I can't connect it to my laptop dell latitude D630 with windows 7. My android phone can connect to the laptop (the laptop can't see the phone, tough), and the mouse can connect to an android tablet. But the mouse it's not seen by the laptop...what should I do ? to update some bluetooth drivers ? they seem up to date.
View 3 Replies View RelatedI'm doing some audio work, editing drums, which involves taking a few audio files (7 or 8) and splitting them into hundreds, one for each drum beat.
My problem is that when I do this, my computer completely locks up. I've noticed that as soon as I do this, Windows 7's RAM Cache jumps up to 1.7gb. And I've only got 2gb of RAM, so it leaves only 300mb for my audio program to run, and I think this is the problem.
Is there a way to temporarily or permanently disable Windows 7's ability to cache your RAM? Because it doesn't seem to be disabling when I want it to.
I'm running the Windows 7 RC Build 7100 atm, with an Intel Core2Duo (2ghz) and 2GB of ram.
I was having trouble with the printer spooler stopping, finally got it fixed after 4 stressful days, went to Administrative tools, print management and deleted the print jobs that were waiting to be printed and it worked. you may have to go to services and restart your printer spooler first before it will recognize your printer.
View 1 Replies View RelatedI am trying to install Windows 7 RC into to different machines. Both are self built machines. Both are running Win XP w/ sp2.
On one machine I have tried everything to get past a CD/DVD Driver request. The first DVD driver is a NEC ND-2500A. I found what I thought were the drivers, but whenever I get to the point of selecting the drive (with the drivers in it) they don't appear within the DVD drive.
I even went as far as to load the driver onto the HDD I am installing Win& to. After may attempts, with no luck, I installed a plug and play CD/DVD player. Now, I have never had driver's for this unit, but it still wants drivers for it.
What am I missing here? Why won't it get past this point. I have even gone as far as disconnecting C drive and tried loading directly to D drive (second HDD drive).
On the second computer it mentions something about an I/O shield problem and wont even let me get into the setup stage.
I have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
View 9 Replies View RelatedI'm running Win 7 Ultimate x64 on a desktop with the OS loaded on an Intel 160GB G2 SSD as C:. I've noticed that Defrag is happening on the SSD drive. I've confirmed this in two ways: First, looking at the Last Run date in the Disk Defragmenter UI. The date associated with the SSD drive C: continues to move forward. Second, I've looked in the event log and have confirmed that there are messages stating the successful defragmentation on the C: drive.
I have 3 drives in my system. The SSD drive is C:. I have 2 WD 750GB drives as D: and E:. If I look at the Defragmentation Schedule UI, only drive D: and E: appear. Just to be safe I turned off Scheduled Defragmentation and Defragmentation has stopped on D: and E: but continues on C:.
Looking at the event log, there seems to be no discernable pattern as to when the defrag happens on the SSD:
I can't find any place to stop Defragmentation from happening on C:. Any suggestions?
Verizon will not let me log in. When I type in user name and password, it comes up that I have used a wrong procedure. I'm typing the correct items in their boxes.
View 1 Replies View RelatedAm using Hp Probook 4720s with window 7 32bit OS. A couple of days ago i shut the cover of my laptop while updates are being installed and since i cant get to start the window. it keep stopping and starting in circles. I have done system recovery several times and sometimes it gives an access denied to message "c:windowssystem32configsystemprofileDesktop is not accessible" messgaes. i can not access my files to do any work.
View 2 Replies View Relatedhow to stop the print size from changing when I click on a link within a web page? At the moment I have a 150% print size but that changes to a very small 100% when I open a new link. This happens nearly every time I click on a link or open a new webpage. How can I prevent this from happening at all?
View 5 Replies View Relatedthe comp stops at random points it happens in all os's xp, vista and 7 i have tryed everything i can think off the on;y stange thing is that when in safe mode it works perfectly fine but as soon go onto the normal mode it hangs for 2 to 20 mins at a time. there is no mouse or keyborad movement and no movement on the screen at all. no networked devices or drives. brand new instalation on the os's, full delete, partition and format.
View 9 Replies View Related