MSI Afterburner Crossfire Fan Speed Control Issues
Jun 20, 2012
Hey people, I am having some trouble with MSI Afterburner and its fan speed control function. I have a custom curve setup and I have it where it synchronizes both GPUs in settings and it works great when I first boot and play a game for a while but then when I let it sit and go on the internet for 10 mins or so or put comp to sleep then come back, the custom curve only applies to the main GPU, and nothing that you do in Afterburner will change the second fan speed. I tried restarting the program, putting it on manual control, changing the curve and re applying it, but nothing seems to work on the second GPU fan speed until I reboot the whole computer again.
My specs if needed:
Crossfire XFX HD 6970s
Intel Core i7 3770
ASUS P8Z77-V Mobo
16GB Ripjaws 1600MHz
1100W ABS Majesty PSU
Windows 7 64-bit
P.S. I have already tried disabling that ULPS thing in registries, which did not work.
View 6 Replies
ADVERTISEMENT
Jun 30, 2011
Ordered a new XFX HD5850 Black edition which is being delivered tomorrow , for the nice sum of 111.Will be running it in crossfire with my current 5850.Do I just plug it in and enable crossfire in the catalyst control center or will I need to install drivers for this card first?
View 7 Replies
View Related
Dec 29, 2011
I just want to be able to increase the speed of my fans beyond their spec, and have complete manual control over their RPMs without a care about the temps. I have a liquid cooling setup and the fans on my radiator as they are right now simply aren't cutting it. I have them hooked up to the motherboard in hopes of finding something to just boost their speed via software, but SpeedFan is the only thing I could find and it simply sucks for that purpose.
View 5 Replies
View Related
Jan 17, 2012
I have a ZXDSL 531B router from ZTE. Now here's the setup for the DSL router with 4 LAN ports, which all are connected to different PCs. And this happens to be the ONLY source of internet to all of us. Here's my needs, I want to control EACH LAN port speed, as it can be shared equally & not one stealing most / all bandwidth & rest left begging . Every computer uses Windows 7.
View 3 Replies
View Related
Dec 24, 2011
When I use vlc media player to play mp3 files on slow speed the sound cuts out . It is a toshiba netbook and windows 7 starter operating system. What can be the problem.I really need the slow play to listen to language course
View 1 Replies
View Related
Jan 17, 2012
Generaly i know PCIe3 is supposed to be an all around bug fix to pcie 2 however, i already have a 6970 and dk how to afford a 7970 at this time, would 2 6970s (i already have 1, add another) costing me around 250-350, ultimately running post cross fire at 4 gb going to be more ore less powerful than a 7970.
View 8 Replies
View Related
Dec 6, 2009
I have an Asus M4A785TV-V Evo motherboard. It has an integrated Hd 4200, but that is not used. It also has two PCIex16 slots, one of which has my HD5770 in.
If I get a second HD 5770 and put it in the other PCIe x16 slot, will I be able to run Crossfire?
The motherboard manual says that it supports Hybrid Crossfire between dedicated and integrated cards, but nothing about Crossfire between two dedicated cards.
If it doesn't support crossfire, can I still put a second graphics card in and use it in the same way?
View 6 Replies
View Related
Dec 18, 2011
I just recently bought another card to xfire for my rig. Since ive done this however my games randomly freeze or bsod, or freeze with a loud buzz until i shut my rig down.. i think its a driver issue, because it used to do it when i had 1 card and i bumped it down to like 11.10 and everything worked fine.. but when i got the new card, apparently 11.10 didnt support xfire.. so i had to update to 11.12.
View 9 Replies
View Related
Feb 12, 2012
BSOD After 10minutes While Playing Crossfire
View 9 Replies
View Related
Oct 25, 2009
I Installed CrossFire Having played it before i upgraded, and it gave me a blue screen. I though " oh i did something wrong " So i unistalled and reinstalled, you know, the stuff you usually do.
Anyway, i've been reading around the forum and i've found other people are having this problem too, " Getting the bluescreen " Now i was wondering if their any fixes that could make the game work, Any help would be useful and much appreciated!
View 2 Replies
View Related
Jan 30, 2012
I've been having longer then normal windows load time after getting my second 6950 in my comp. I noticed that it starts up then goes into black screen with cursor then takes another 5 seconds to completely load into windows. Im thinking its something to do with adding another video card as i haven't experienced this before adding it.
My Windows is installed on my Intel 320 80 GB SSD. Game performance stays the same. just the load up time for windows has slowed down a lot and there's always a black screen with the cursor before it fully loads in now. I have the latest CAT
View 9 Replies
View Related
Jul 20, 2012
The crossfire is freeze when i get username and pass
View 1 Replies
View Related
Aug 4, 2011
I use Apple Mac Pro 3,1 (2008) with the following specs:
Windows 7 Ultimate 64-bit
2x Intel Xeon E5472 3.0 GHz
32 GB DDR2 FB-DIMM Micron/Hynix
2xATI Radeon HD5770 1 GB DDR5 XFX + Apple genuine
Realtek High Definition Audio
Apple Cinema HD Display 23"
[code]....
I would like to enable Crossfire in Catalyst Control Panel, but it do not work on drivers newer than Catalyst 10.11.I got BSOD on atimkdag.sys. How to fix it ?Tried Driver Sweeper but no luck, even installing fresh system didn't worked.
View 9 Replies
View Related
Dec 27, 2009
I just built a clean install of Windows 7 Ultimate (RTM x64) and have the system running great with one ATI 5970 video card. Upon adding a second card (in the correct x16 slot per my MB manual), rebooting shows the "starting windows" screen, proceeds past this to a black screen with a movable mouse cursor (occasionally I get an hour glass for a moment and then back to cursor).
Here's what I've tried to troubleshoot:
- Combed through the Seven Forums and couldn't find a similar issue
- Ensured BIOS was latest and chipset drivers were installed (MB = MSI x58 Eclipse SLI)
- Tried with and without the Crossfire interconnect
- Tried the new ATI hotfix drivers
- Tried Win 7 Startup Repair - no luck
- Let the machine sit overnight to see if it would eventually come up to Windows - no luck
- Tried safe mode and the machine displayed same behavior
- Removed original card to make sure card was seated in the slot correctly and power was properly connected (I have a 1KW power supply). Removing the original card, the machine booted fine on card #2.
- Removed all other cards (only other was an XiFi card) - and with two cards in, same behavior
- With one card in, uninstalled the ATI drivers, rebooted into Safe Mode and ran Guru 3D Driver Sweeper (in Admin mode) and removed any other residual driver stuff. Rebooted to ensure it was all gone (it was), and inserted card #2, same behavior
I can get it to boot to DOS boot and it passes BIOS fine - so I think it's a Windows issue or a hardware resources issue - just can't tell what it is hanging on...
View 2 Replies
View Related
Jan 30, 2012
I've been having longer the normal windows load time after getting my second 6950 in my comp. I noticed that it starts up then goes into blackscreen with cursor then takes another 5 seconds to completely load into windows. Im thinking its something to do with adding another video card as i haven't experienced this before.
My Windows is installed on my Intel 320 80 GB SSD. Game performance stays the same. just the load up time for windows has slowed down a lot
View 3 Replies
View Related
May 22, 2012
My processor is a A8 3870K that has integrated radeon 6550D graphics.The box of the processor mentions it can crossfire with any of the following direct x 11 capable graphics cards HD 6670, HD 6570, and HD 6450
View 5 Replies
View Related
Dec 1, 2008
How To Speed Up Windows 7 - Speed Tweaks by doing the following:-
Disable indexing
Disable defragmentation
Disable Write Caching
Configure Superfetch
Disable the Page File
Disable System Restore
Disable Hibernation
View 0 Replies
View Related
Dec 21, 2011
When I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
View 1 Replies
View Related
Oct 12, 2010
I am trying to set my monitor's screen give accurate renditions of my pictures. I use Quick Gamma to set gamma. When doing this I can use either Nvidia's controls or windows controls (right click desktop>Nvidia Control Panel. When using Nvidia's Control Panel, there are two choices: Use other applications control color settings or Use Nvidia settings. Am I correct in assuming that the former setting is Windows? I always check the button to use Nvidia settings (and then Apply>OK), but when I go back to this screen at a later time, the Other applications control color settings is always selected. I'd like to default to Nvidia.
View 3 Replies
View Related
Dec 31, 2011
how do u speed up RAM?
View 4 Replies
View Related
Jul 30, 2012
Does HDD come with different Speed or all of them or the same?
View 3 Replies
View Related
Jan 2, 2013
I just bought a usb 3.0 pci-express card and a western digital 2TB usb 3.0 my book external hard drive. i hooked up the pci-card and the drive, but i'm not getting any speed boost. After reading through many posts, I downloaded HD Tune to check speeds. I have my 3.0 WD hard drive and my 2.0 seagate drive both plugged into the 3.0 pci-express card.
WD 3.0 drive average transfer rate = 36MB/s
seagate 2.0 drive average transfer rate = 36MB/s
my internal hard drive average transfer rate = 69MB/s
The pci-e card is showing up as usb 3.0 is device manager..why I'm not getting any speed boost with my new card and hard drive?
View 8 Replies
View Related
Jan 15, 2013
I'm looking at getting a new graphics card. I have set a budget of about $250 US. And I like nVidia.So that puts me in the GTX660 class of cards, pretty much.Now for that budget I see there are cards that have more VRAM - 3GB vs 2GB,or they have a slightly faster GPU speed and a faster shader clock. All the other specs remain the same for all cards in this class. But to get both it looks like I need to bump up to the Ti version and a $280+ budget.What do you think is the best bang for the buck? How important is any of this - or is it just splitting hairs?My primary application is CAD work using AutoCAD.
View 8 Replies
View Related
Feb 28, 2011
When ever I'm transferring something or if hdd is being use by another program. I can't do any else.. It drops the Speed bad. I have a Fresh copy of windows 7 Ultimate.My Hdd is a seagate 1tb 7200rpm
View 2 Replies
View Related
Aug 23, 2011
When I connect my external hdd, it tells me that this device could work faster if I connect it to a Hi-Speed USB port. When I try to copy any files, transfer starts at about 70mb/s and stops after a few seconds, time left is calculating and when it starts again the speed is about 1.5mb/s. Sometimes pc doesn't find the hdd at all. I've installed the latest chipset drivers but nothing new happened.
View 2 Replies
View Related
Oct 20, 2012
I use IBT (Intel Burn Test) to test my stability and when I disable HT I get a speed reading of 55 GFlops and each test takes 139 seconds on very high stress level, so I tought to myself hey why don't I activate HT again because I have it so why not use it, started IBT and it shows me a speed of 46 GFlops and it takes 161 seconds for each test how is this possible, Should not HT increase the calculation speed of the computer?
View 9 Replies
View Related
Sep 21, 2011
So I want to use MSConfig on the Selective Startup with Load System Services checked but when I do that it disables an internet connection. I was wondering what to load under either Services or Startup tabs to enable internet in Selective Startup Mode
View 1 Replies
View Related
Oct 16, 2012
I am using Windows 7 Ultimate. Recently I face a problem with its speed. I need to setup windows 7 every 10-15 days later. The reason is, the speed of my computer is become slow day by day. My computer is antivirus protected so I guess it is not a problem of virus.
View 3 Replies
View Related
Oct 10, 2009
Currently I have a 1.6GHz Intel Atom processor, and 1GB of ram. Crucial say the max my netbook can have is 2GB, will this speed up my PC lots, or would I need a different processor.
I'm using Windows 7 Ultimate(overkill), which runs surprisingly fast with aero and all effects on, but it would be nice to play a few games that currently lag.
View 9 Replies
View Related
Jan 4, 2010
i am using windows 7 64bit OS .. i have 4 gb ram .. but i am getting transfer speed of only 1.5 mbps or 2 mbps only ..
some times i am getting good speed like 9mbps or 14mbps
am i connecting to 1.1 USB or 2.0 USB ?
how do i know ?
i have 3 ports in my laptop .. sometimes i get more speed in one port and less speed in same port next time ?
how to improve my transfer speed ?
i increased my virtual memory to 10 GB and close all processes which are not needed. but still cant get enough speed?
my pendrives are compatible with USB 2.0
View 1 Replies
View Related
May 10, 2012
I currently have speed fan but what ever i do i cant adjust the speed of my fans with it. I have read various guides online with no joy so i think its time to try something else if there is anything.
View 4 Replies
View Related
