I removed Win8 and replaced it with win7. Once the install of win7 is done i can make changes to my desktop but once i restart my computer it doesn't reboot at all. It just continues as a cycle of endless rebooting. I also went into the Bios to make it boot from HD but nothing.
the computer is a Samsung np300e5c. Bios is Phoenix SecureCore Tiano Setup
I have a new Acer aspire 5750G all singing dancing comes with every thing except office. I set it up for first time use put some bits on it and then made a big mistake...like a fool i wrongly loaded windows 7 home premium over it instead of the office 10 disc. The desktop nows only shows the recycle bin, no net, no nothing, i can not do a thing with it to put this right.
i have shutted down the PC with Win7. When i Started again it loaded as usual but after the desktop cames in ,and the blue screen has appeared and restarted the computer again and aftr repetead again again
I have a computer on which the usb devices stop working/receiving power once windows has loaded (they work up untill windows finishes loading). I installed windows on a different disk everything else remained the same, now the mouse and kb work. Is there a known fix for this? If not is it possible somehow to transfer the user settings from one disk to another, so i get the same settings on the new drive perhaps (mind you, no mouse or kb support on one of those windows)?I have tried a lot of windows disk fix things, none of them have any effect, very strange, have never seen this before. Usually i get pretty much everything fixed using google, but this one.
I recently installed windows 7 on my desktop. During boot up I can use my keyboard, but once windows loads the keyboard is unresponsive. I've tried a wireless and wired keyboard. I also have a wireless keyboard and mouse combo in which the mouse still works but still no keys.
Windows 7 started and once it loaded the desktop it glitched up kind of like the rrod does with the 360 all the programs on my desktop had lil. glitched box's surrounding them and it froze up did it 2 times after rebooting then i booted into safe mode and it booted fine i moved a program that booted with Windows 7 while in safe mode to the desktop so it wouldnt boot with Windows 7 and i don't think that had nothing to do it but it started normal after being in safe mode.
Basically, the title sums it all up. Everytime I load the windows 7 professional, the 3 programs loads itself up too. Both Word and Excel starts with an empty page. IE9 will try to connect to the internet. And I can't seem to disable them from autostart. I have looked in the Startup folder. It's empty. I've tried msconfig. I don't see anything related to IE9, or MSOffice in there.
As stated, loaded xp after shrinking the drive and using easybcd. got all going but can't load updates for xp. I'm downloading sp3 for xp and have shut down AV and the firewall on the Windows 7 side. get a code which i didn't write down.Are there issues when doing an upgrade with xp, or does sp 3 need to be installed first ?.HOW does one become a donating member to get the lights on ?
I bought my acer recovery and system discs and loaded them everything went smooth untill the end put last disc in and it loaded it and then said windows will complete installation after restart then it shut off and restarted the lil wii fii light came on and blue disk light blinks but nothing on screen?
I have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?
I'm trying to wipe my pc, and reinstall windows 7. I have to use a downloaded version. It's legit, I've used it before. I just want to rid my pc of all the crap on it.I have a toshiba satellite p755d. It won't boot from any kind of media, nor does it seem to recognize it until windows is loaded.I went to the bios to change the boot order but I couldn't find that option anywhere. I've tried all the function keys as well as holding down the "c" button when the pc boots up.The most I get is a "Windows Error 'something'" I can't remember what it says at something.
When I insert the disc and wait until the CD boots and the files loaded the installation screen appears and is just stuck. The mouse goes off and the keyboard is all so off. My configurations are Core i5 2400, 8GB ram
Windows 7 64 bit loaded on a clean formatted disc on Dell M5030. However no wifi drive or other drives are installed. Also, I cannot install any drivers I get a message need to know if you are running x84 or x64. Seems that the software isn't putting the entire programs up.
My computer runs like grease lightning in safe mode, and my internet speeds are marvellous also, but alas when not in safe mode I have on quite a few occasions lately had my Windows freeze, my Windows Live Mail also freeze. I will define freeze, everything just does not work, my browser Firefox/Google, none of my loaded programs.
I have to leave the computer for about 10 minutes, and then it is perfect all day!, so I am guessing a program is causing the dilemma, but which one? I have about 60 applications running and I haven't loaded a new one in about 6 months. Is there a program I can purchase/download that would seek out the rogue program if indeed it is a rogue program.
Can anyone tell me if I can install an OEM Win 7 64 bit serial number on a system that was loaded from a Dell reinstallation disk? I bought the disk, and what turned out to be a bogas serial number from different venders. Now I have purchased the whole legitimate program from a vender I trust. The reason for wanting to do this involves licensing limits on other expensive software already loaded.
I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
I'm running Win 7 Pro 64 bit, FF is primary browser. I have a Verizon FIOS network. I've been getting the following message when I boot up:"The RAS DLL couldn't be loaded. If you don't have a modem installed this is a normal situation. If you use a modem, check that the RASAPI32.DLL is properly installed. Due to this reason, the options related with the modem will not work.This alert can be disabled in the General Options tab." I don't have a modem. Could someone tell me what General Options tab this is referring to so I can disable this alert?
I have a Dell laptop with windows 7 OS 64-bit. The problem is that for the last 2 days i have found it impossible to install anything on it as an error keeps popping up saying MSCORWKS.DLL COULD NOT BE LOADED. I have a lot of important files on my system and i don't want to loose them. how to restoring my system to a previous date say like 2 weeks ago as the system restore only allows me to go back 2 days.
My computer hard drive crashed a week ago and most of my back-ups went with the system. So, I got a new 500 GB drive and have been re-installing everything from scratch. I started with a clean install of Windows XP (service pack 2), which took forever to get all the up-dates done. Then I upgraded to Windows 7 and did the up-dates for that. I didn't make a recovery disk at this point because I wanted to get everything installed first.Unfortunately, the last time I went to reboot it failed. When I power-up the computer it stalls out on the Dell BIOS screen. I can't get into Safe Mode, Setup, or the Boot Menu because my keyboard and mouses are not working. They are both USB and none of my USB ports are working. (Also, I have not PS/2 ports on my machine.).
I had to restore my computer. After I did so and it went through the new setup, I supplied a new password. When I went to logon, it accepted my password but then at the next screen, iit read:The User Service service [sic] failed the logon. User profile cannot be loaded.
Netbook specs:Samsung N145P w/Atom N455 and 1GB RAM & Windows 7 ultimate.Lately the computer mouse becomes very choppy and laggy (not smooth) when doing tasks like loading pages or anything that uses CPU, this happens on both touchpad & external mouse. Updated drivers without success does anyone know why.
I built this new system. When I went to install XP I kept getting errors, a problem has been detected and windows has been shut down. I didn't write down the error code but I did go as far as hook up a IDE hard drive with just XP no other drivers. I wanted a 64 bit os anyways and decided to give Windows 7 a try. Install was easy no errors. Games and IE seem unstable. IE gives errors but doesn't crash, Grid crashes and I have no logitech support which isn't good for games.
I'm now trying to install dual boot and I get the error windows has been shut down, again. The code is,