KB 2753842: Being Offered Again Even Though Already Installed

Dec 20, 2012

I am being offered KB 2753842 via auto updates on my new Windows 7/64 DT, even though it was already installed with Patch Tuesday earlier this month. (I have auto updates set to "notify".)

I understand that some systems ended up with broken fonts (and worse!) after KB 2753842 was installed with the December Patch Tuesday load. Many folks uninstalled it & some had to roll back their systems, etc. I did not. In fact, I was in the process of setting up a new Dell DT system around the time it was released. So, it was among the many patches needed to update the new rig. It went in fine (before I knew that it was potentially problematic) and it seems to be causing no issues. It is still listed as an installed update.

So, I'm a little nervous to reinstall it on my new, clean system ("if it ain't broke don't fix it"), especially since I've heard horror stories about BSOD and needing to roll back to RPs, and since it's already listed as installed. OTOH, it's a security patch. So, I'm likewise reluctant to hide or ignore it.

Questions:

1. Is this some sort of "patch for a patch"?

2. Is it safe to (re)install on a system that already lists it as installed?

3. Does it require a reboot?

View 4 Replies


ADVERTISEMENT

Enterprise Upgrade Version Offered Through Work?

Dec 23, 2012

I have Windows 7 HP x64 on my computer and I just found out that an upgrade download version of Enterprise is offered free through my job. I have read through threads dating back to early 2012 that say that upgrading from HP to Enterprise is not possible because Enterprise has a different license key.

1) Is this upgrade version of Enterprise meant to be an upgrade from XP Enterprise, or is there now a way to upgrade from an existing Windows 7 version?

2) When upgrade version are offered to employees through a job like this, are employees required to get a key from the software admins, and does this also apply to downloaded version? There was no mention of a key on the download page.

3) Can a Windows 7 HP to Enterprise upgrade exist or would I have to do a clean install of the Enterprise using the upgrade image/disk?

View 9 Replies View Related

Reinstall Windows 7 From Free Upgrade Offered In 2009?

May 5, 2012

When my laptop was purchased back in 2009, it was given a free upgrade from Vista to Windows 7 because 7 was just about to come out. Now, I have restored my laptop to factory settings, which returned it to Windows Vista. Is there a way I can access the free upgrade again?

View 5 Replies View Related

Windows 7 Sp1 Is Not Offered From Windows Update

Mar 13, 2011

Windows update have not offered me (yet?) to install SP1 update. The only reason I can think of is that I have not installed KB976902, but as it has been dubbed as the "Blackhole" update until recently, you can understand my hesitation to install it. Most experts advised to wait. Another issue that arises is that after some research I did in the internet, one of the hotfixes installed with SP1 is KB971033. I guess many of you remember this update and that a lot of people (between them myself) were reluctant to install. What does it mean KB971033 hotfix installed?So I would like to hear your opinions and suggestions as to how to proceed with updating to SP1 (is it worth it? Should I wait until it is offered?) and if anyone has managed to install it without having to install KB976902.I have windows 7 ultimate x64.

View 7 Replies View Related

Installed Windows 7 In Laptop,but Accidentally Installed It In D-driv?

Nov 19, 2011

i had installed windows 7 in my laptop,but accidentally i installed it in D-drive,now both C & D drives are showing program files,program files x86,windows folders,my D drive is full

View 1 Replies View Related

Device Status - No Driver Installed But Driver IS Installed

Sep 19, 2012

Every now and then my WiFi stops working, and if I go to dev mgr, the General tab tells me that "No drivers are installed for this device" for device status. On the other tabs, however, I have all the details on the installed driver, and if I ask Windows to update the driver, it tells me that the best driver is already installed. The problem is solved by rebooting, but I find that annoying. I'd like to figure out WHY it does that. I've saved earlier versions of that particular driver from over the last three years, and the problem occurs with all of the drivers. This is a Windows 7 Ultimate 64-bit system. The driver is an Intel driver; the one installed at this moment (it just happened again, and I have not rebooted, since I had a powerline enet outlet handy), and the version of the Intel(R) WiFi Link 5100 AGN is 14.3.1. I have other versions of that driver saved, from 13.2.1.5 to 15.1.1_Ds64. I had reverted to the 14.3.1 because the more recent versions seemed to be worse about the driver disabling itself or whatever it is doing.Coincidentally with this, the event viewer shows that mmc.exe was terminated because it was hanging. I had just run sfc yesterday, and there are no corrupt files that Windows cannot fix, and there weren't even any corrupt files that it DID fix.

View 5 Replies View Related

VHD Installed And Used On USB Key

Jul 25, 2009

Is it possible to boot from a usb pen and use a VHD inside it?

To be completely indipendent from specific computer disk boot

View 9 Replies View Related

Installed 32-bit Instead Of 64-bit?

May 7, 2011

I accidentally installed the 32-bit disk instead of the 64-bit disk on my new computer build. How do I remove the 32-bit version and install the 64-bit?

View 6 Replies View Related

How To Get Installed Os Without Cd

Dec 17, 2011

I have Dell lappy and my CD rom was not working since couple years. I need to reinstall my OS as my CD-ROM is not working.Can you please give an idea how to get installed OS with out CD- ROM or even partitioned.

View 2 Replies View Related

PC Not Recognize The New RAM Installed?

Jan 20, 2013

I have a pretty old Compaq Pressario that was running 2 512 MB sticks so I added 2 1 GB sticks today but it still shows it only utilizing 1 MB. I put the new sticks in the original slots and moved the old ones over so it is not an issue of installationI ran CPU-Z and all four sticks show up in the SPD tab but the 2 new ones only have values in the timings table under JEDEC #1, the 2 old ones have JEDEC #1, 2, and 3.

View 8 Replies View Related

8G Ram Installed But Windows 7 Only Using 4?

Aug 14, 2011

Win7 Ultimate
SP 1
AMD Phenom II X 4 965 Processor 3.40Ghz
8GB (3.12 usable) ????
32-bit OS

I just built me a new computer. I installed Win7 Ultimate. Everything is running pretty good. I went to look at the stats for my system and noticed the RAM. Windows sees the 8 gig that is in stalled but Im unsure why its only using 3 gigs.

View 4 Replies View Related

Updates Not Getting Installed

Jun 1, 2012

Running Window 7 Starter. I logged off. It says,do not power off or unplug your machine. Installing 1 of 69 updates. It has been like that all day,nothing installs. Need help with this problem.

View 1 Replies View Related

Two OS Installed But Loads Only One

Jun 19, 2011

I have installed windows 7 in C: drive and after than i installed windows Xp in D: drive.But now when i start my computer it automatically start windows Xp.in the C: i searched for the boot.ini it was windows xp written there also.

View 2 Replies View Related

Windows 7 Cannot Be Installed?

Sep 24, 2010

Recently i bought windows 7 to install instead the xp im using now, the problem is after partitioning and installing, the moment when windows wants to start for the 1st time, it gets stuck in the black screen after loading windows remains and the only thing that can be seen is mouse cursor, no matter how long i wait, the user creation and windows 7 configuration never shows up!P.S: My pc specs are:HDD: near 160 GB...i gave 30 Gb 1st time, and saw the problem then gave 45Gb, and the problem remained..CPU: intel pentium 4, 3,20GHz 3,21GHzRAM: 1GB...I've noticed that 64-bit needed 2GB of rams, therefore i tried to install Windows 7 Ultimate 32-bitGraphics card: NVIDIA Geforce 7600 GS - 512 MB of ramptical Driver : Ofcourse. It is DvD Drive.

View 5 Replies View Related

Installed A New Hd In Computer

Mar 12, 2011

I had a HD in my old one that's only 4 months old..so I put it in my new computer, formatted it, named it, (I'm only using it for photo/vid storage) now when I reboot windows7 it tries to boot from that disk...so I have to go in BIOS and switch things..(yes I switch and SAVE) but it still does this every-time..What have I done wrong? Is this a Windows7 Disk Management problem? BOIS problem? or me? I have my normal disc set as..Disc0..Boot,page,crash, primary...New one as Disc1, primary.

View 2 Replies View Related

Did UNetbootin Installed Something Else

Apr 28, 2011

i just wanted to have a USB boot-able pen drive in case of emergency, and i found that the UNet booting software could take my image and put it into a USB stick, everything seems right but when i started the process i see the "Restart" option at the 4th stepmy problem question its quite simple.WHY?why it ask me to restart? i suspect that it wast created in order that just after you finish creating the boot-able USB restart to try it but why if i don't want, i just wanted to make a copy and to save the usb stick in a safe place and continue working but what is my fear about it? and what about if that intrusive software has made any modification in my system? because no necessarily the system i use to run the program is the system i need to boot from usb..and what about this?:the software webpage says:http://unetbootin. sourceforge.net/For the Hard Disk / "frugal install" mode, UNet booting uses a Windows or Linux-based installer to install a small modification to the boot loader (bootmgr and bcdedit on Vista, grldr and boot.ini for NT-based systems, grub.exe and config.system for Win9x, or GRUB on Linux, uses the boot loader to boot the desired distribution's installer or to load the system utility, no CD required. After the distribution has been installed, or once done using the system utility, the modification to the boot-loader is then undone.

View 3 Replies View Related

Why Can't Keep Installed Programs

May 15, 2011

Ok this is a question I get when working on computers and the only recourse is an Operating System reinstall or in the case where I am advising someone on a heavy upgrade/new purchase. Me personally I don't really care why, I just need something simple to tell people when they ask me besides saying "Well you can't!"Why is it that when you reinstall Windows 7 or move from Windows XP (98,95 etc.) to Windows 7 (Vista, ya lets not go there) there is no way to keep your programs installed?

View 12 Replies View Related

Possible To Change From 32 Bit To 64 Bit If Already Installed?

Jun 23, 2012

Is it possible to change from 32 bit to 64 bit if already installed?

View 4 Replies View Related

HP J6400 Installed

Feb 13, 2009

I was able to get printer to work after I ran the HP J6400 Installed setup in Vista Compactability mode.

View 4 Replies View Related

6GB RAM Installed But Only 3GB Usable

Feb 7, 2012

I have 6gb ram installed but only 3gb ram is usable why is this and how can I get it back to 6gb again.

View 7 Replies View Related

Installed 4Gb Ram, Only 2 Gb Usable?

Dec 19, 2011

My motherboard is the ASUS Maximus III Formula, using Intel Core I5 760. And I recently did a dual boot on my system. One copy of Windows 7 Ultimate x64 on my original hard drive, and a Windows 7 Home premium x64 bit on another hard drive ( Hitachi ) and after a month or two, I had to format that ( Hitachi ) hard drive as I needed it for extra storage and now I'm getting only 2 Gb usable RAM but I installed 4Gb.

View 9 Replies View Related

Windows 7 Cannot Be Installed

Sep 24, 2010

Recently i bought windows 7 to install instead the xp im using now, the problem is after partitioning and installing, the moment when windows wants to start for the 1st time, it gets stuck in the black screen after loading windows remains and the only thing that can be seen is mouse cursor, no matter how long i wait, the user creation and windows 7 configuration never shows up. [code]

View 9 Replies View Related

Reset OS To When It Was First Installed?

Mar 22, 2011

I have a Inspiron 1545 Dell that came with Windows Vista at first, but then I put in Windows 7 Ultimate and got rid of the Windows Vista Partition. What I want to do now is to put Windows 7 Ultimate back to when I first installed it, as in have it to where I just got done installing Windows 7 Ultimate. Is there a way I can reset the computer to where I will not need the CD or the serial key to do this, because I no longer have possession of the CD or key. I do not have System Restore points at that time or any backup of that time either. If I reset it will it reset to Vista? I do not want to go back to Vista I want to be able to keep Windows 7.

View 9 Replies View Related

Configure The MBR After New HDD Installed

Oct 2, 2009

The situation is simple, just got a new HDD and installed a fresh copy of Win 7 on it - now when i try to remove the previous HDD (with the previous version of 7 on it) it won't boot. Is there any way windows can configure the MBR or am i forced to reinstall ?

View 2 Replies View Related

Installed The Windows 7 And 160/170 GB Gone?

Jul 4, 2010

I'm learning still - so forgive my nubness! I went to microsofts site to d/l the Windows 7 ( 64 bit ) 90 day trial.

Burnt the iso to a DVD and booted from disc...

I think it told me the old files would be saved as something ".old" but I cannot find it anywhere and now i am running low on HD space and have nothing installed yet!

I only have one HD running so...

View 1 Replies View Related

TCP/IP Not Properly Installed?

Feb 21, 2012

every time i started my loptop computer, a message "backupManagertray: The TCP/IP protocol is not installed properly". i can connect to the internet using the namoroka firefox, but the mozilla cant connect to the net. even my antivirus cant connect/update too.

View 1 Replies View Related

Update Is Still There After Being Installed

Sep 16, 2011

These 2 updates are in Windows update awaiting to install.Once (and it wasn't at first install) there was an error message and i deleted some files as directed by MS help page.Now they are always in the Windows update page, I install, no error, they are still there.

View 3 Replies View Related

Ram Installed 4 Gb Usable 3.25 Gb?

Mar 1, 2011

i have corsair xms 2x2 4GB 9-9-9-24 1333mhz with phenom 965 and biostar890gxe..........for about 15days after aasembling the pc running windows7 x64 my pc showed ram installed 4gb 3.25 usable

View 5 Replies View Related

Best Motherboard To Be Installed On Pc?

Sep 17, 2011

Which is the best motherboard to be installed on pc

View 2 Replies View Related

Which Widnows 7 Should Be Installed

Dec 16, 2011

I have a 32 bit Dell laptop and it is currently running Firefox and a pirated version of W7. I want to wipe everything and start from scratch. Which W7 should I install?

View 2 Replies View Related

Windows 7 Installed At 62.6 GB On SSD

Jan 9, 2012

I installed Windows 7 on a brand new SSD and I go into windows explorer and its telling me 48.4 GB free of 111 GB, otherwise known as: Windows 7 and only Windows 7 is taking up 62.6 GB!

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved