Interupt Exception Not Handled - Caused By Driver Tcpip.sys
Nov 11, 2011
On random occasions (not that often), I get a BSOD - 'Interrupt Not Handled'. Initially I thought it only happened when I was using my Marvell Controller as opposed to Intel but the dump check seems to suggest otherwise
System: Rampage III Formula, Mushkin 12gb Redline, i7 930@ 3.8ghz, Windows 7 64bit Home Premium, EVGA GTX580 @ 840.
Some background info: I am running Windows 7 Ultimate. It is 64-bit. I am running it on a laptop. I have no idea why I got the BSOD, but I did get it today. Restarted the computer in safe mode, then restarted again in "regular" mode and everything was fine. I'm typing on the same computer now (it's the only one I have, okay?). Can't think of anything that would be wrong with the computer, except the charger broke (I'm pretty sure this is a charger issue, and a new one is in the mail) so the battery doesn't charge: I have to have the computer plugged in when I use it.
Almost as soon as I log in to my laptop it crashes. I can use safe mode and I keep my malwarebytes updated so I am unsure as to what could be happening. Here is the data dump:
this is the 5th time i've got a pink screen with artifacts, randomly happens over the course of 4 months. this time i got a blue screen following it. last time the display driver corrected itself. i've ran furmark until the temp maxed out with no artifacts or anything. 86 c. times that the pink screen have occurred, once during mw3, once during vlc media player, twice during Internet just at the homepage, and once during windows media player.
My Thinkpad X201i is running Windows 7 system with Nortel VPN and Lotus Notes. When I connect to VPN and run Notes.exe, the system may meet a blue screen and says: tcpip.exe error. This really drive me mad.
FS9 (Flight Simulation 2004) used to run OK, no problems. After installing REX2004 patches and Overdrive, a few seconds after starting FS9 a BSOD occurs. So far no other programs have caused a BSOD. I have tried fully uninstalling FS9 and reinstalling it and the BSOD returns after the reinstall. At present FS9 is not installed. Have now created the file folder you requested to support this thread, see attached. I can again run FS9?
So I've gotten a BSOD twice and decided to use a diagnosing program to see why it was happening. It picked up that ntoskrnl.exe is causing the BSOD. Why is it happening? What do I do from here?
I just built my girlfriend's PC a few days ago, all was well but now a BSOD appears randomly, so after using BlueScreenView on the dump files it all originates from one driver.The PC in questions specs are almost identical to my own (minus the 1TB HDD and her MOBO is the Rev 3.1 version of the same MOBO).
I then got a BSOD and my boot disk (an SSD) disappeared from the BIOS. I thought I was in big trouble. I have another controller so I plugged the SSD into the other one and booted to it and rolled back to the MS driver (just for the SATA controller). I then put everything back together.
Everything seems to work now. Do I need to take any further steps to prevent this from happening again? What happened?
My system get freezes everything and suddenly goes into BSOD stating Driver Power State Failure. I am attaching the mini dump along with the screen shots. With Bluescreen View i could find out that it caused by ntoskrnl.exe
Where is the network card connect & disconnect information please? In XP it was in the System Event log, but not in 7. I can get this information when I use a mobile as a tethered modem but I need to know when the LAN network card is detected.
The HP laptop I have was designed for Win XP and someone upgraded it to Win 7 Ultimate before I obtained it. Everything ran fine until recently it started blue screening. The message says "a clock interupt was not received on a second processor". It appears updating the BIOS would work but HP does not offer a BIOS upgrade for Win 7, only for Vista and before. It appears you can use some drivers from XP though I am not sure BIOS would be one of those drivers.
This BSOD only started happening when we started streaming videos from our PC to our Roku 2 using PMS(Plex Media Server).Sometimes, not all the time, we will be 5 minutes into a video and it'll BSOD. The 3 most recent were caused during that time. The first 4 BSOD's in my attachment I believe were from driver issues. Maybe you can verify that as well.I've posted in the PLEX forums about it but didn't have any more info other than what bluescreenview provides. I'm guessing it's a conflict with avast AV or other third party software. I searched for an update for the NIC driver since tcpip.sys is mentioned, but there are none since 2009.
My specs:
Windows 7 Pro 64-bit Retail Asus P5Q Pro Intel Q6600 2.4GHz (OC to 3.0) quad-core ATi HD3870 Seasonic 620W PSU Western Digital 1.5TB Black HDD
I'm running retail 64-bit Windows 7 Home Premium on a custom-built computer I made in summer of '09, the same install the whole time. Lately (last couple of weeks) I've been getting a BSOD after running a while, usually while gaming but sometimes when I've only been playing music. I tried finding out the cause myself, to no avail; a BSOD interpreter told me that only ntoskrnl.exe and tcpip.sys were on the stack, but I'm not familiar enough with Windows's workings to really know what that means. Some more googling found a likely culprit, an outdated version of Asus's ACPI driver, but I was unable to find an updated version to download
I have a Toshiba Qosmio F60 notebook that recently started with the following BSoD:0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUALIt happens completely random and I have tried the Hotifx and instructions from Microsoft's KB article 977067.We have not made any recent driver updates or hardware changes. Machine specs are as follows:Machine is approximately 12 months old. System is installed with the original OEM nstallation. Windows 7 Pro x646.00 GB RAMIntel Q740 i7 1.73 GHz750 GB HDD
Computer Stats: 2009 Macbook Pro running Windows 7 Ultimate x32 via boot camp, all drivers up to date as of last night, no non-factory parts or tampering with any system files. Issue: Around a month ago, I noticed my laptop freeze up whenever I left it unattended for more than half an hour. Sometimes it would lag for 30 seconds or so and then be fine, sometimes I would have to reboot entirely. This happened again two days ago and upon rebooting it became stuck during the animation at the "windows loading" screen. I restarted and used F8 to pull up the advanced boot menu, chose "system repair", and it went through two loading screens before presenting a black screen of death that never seems to change. Booting in safe mode works, which I've used to scour the internet for fixes and ways to get incredibly drunk. Attempted Fixes: A full system virus scan (duration: 13 hours) with Kaspersky, Malware Bytes, and Panda. Nothing was returned save a few false-positives from torrents (only trusted trackers, nothing dodgy file-wise). Used the "repair my computer" option at F8'd start-up multiple times to no avail. Used "sfc/scannow" twice, which downloaded some windows updates but didn't fix anything. Yelled really loudly at computer and raised my hand as if to smack it, intimidating it into submission but not fixing core issue.
Here is the result of my bootlog, but before that I'll note that it hangs on "Loaded driver SystemRootsystem32DRIVERSCLASSPNP.SYS" for about thirty seconds when loading in safe mode. I thought that might have been the root and downloaded another copy of classpnp.sys, but again it didn't change anything:
Quote: Loaded driver SystemRootsystem32DRIVERSCLASSPNP.SYS Did not load driver @hal.inf,%acpiapic.devicedesc%;ACPI x86-based PC Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
[Code].....
edit: I made a system recovery disk and attempted to use both its automatic fix feature and its "detect memory problems" feature. Both came back completely fine. Nothing has changed.
edit: Startup Repair has verified that the root cause is a driver. However, I've no idea which one. Surely that's contained somewhere in the bootlog.
SSD, Radeon HD 7950 and Mushkin ddr3 are the newest parts. But I'm experiencing random BSODs (ntoskrnl.exe). There were also BSODs related to dwm.exe, but they disapeared when I installed Catalyst 12.8. Sometimes there are hardlocks without BSODs - ctrs+alt+del doesn't work here so I have to do a hard reset.First I thought it might be related to Radeon 7950 and compatibility problems - F2 (2009) is the latest BIOS for my motherboard (there is also F3J but still beta). Now it seems to be ok after I installed Catalyst 12.8.Then I thought that the SSD connected to Marvell controller is the problem. Well, there is a problem cause BIOS sometimes cannot see this SSD. Now Im thinking of buying a newest motherboard... unfortunately. I updated Marvell Controller drivers, still the same.Next thing - I ran memtest86+ ver. 4.20 to check memory. Pass 0 (Modulo 20, Random pattern) - there's only one error:
Next pass - no error. I let Memtest complete 6 passes. I got only this one error.BIOS settings:
tCL: 9 tRCD: 9 tRP: 9 tRAS: 24
Ram voltage - 1.635v set memory voltage to 1.650V. First MemTest pass - no errors. Second pass also completed. I think that all four sticks are ok. I can't say it's overheating. I'd say the memory is getting warm (even not so warm), but not hot. Third MemTest pass also was completed. No lock ups. Probably too low voltage could generate errors.Today I got another BSOD:
I am trying to run a program on my conputer which I have run many times before.Yesterday when I tried to run it I get a message "unhandled exception". This prevents me from running the program. In the dialoge box it says to press continue and the message will be ignored and try to run the program but it just shades out the program and I cannot do anything .
So I finally get everything installed and running. I updated my gfx drivers to the latest at the time(a couple weeks ago) and things worked.
The computer had been shut off for probably a week maybe longer. Turn the computer on, right after I login, bam, BSOD. system_service_exception.
So I do some searching on another computer. Most of the things come up talking about gfx drivers being the problem, but nothing definite.
I rolled back the drivers. Things work fine. ATI released a new driver catalyst 9.11. I install that, everything is fine. computer was shut down and restarted and still worked fine.
I fire up the computer tonight, bam, BSOD. Same message as before. So I rolled back the gfx driver and now it's working normal again.
Does it make sense for the computer to be working fine with the newer drivers, be shut down for a while, and then not work? Cause that doesn't make sense to me.
There's also not much information out there regarding this system_service_exception BSOD that comes up. It would be nice to have some better concrete info on it.
current setup:
gigabyte ga-ma790gpt-ud3h amd x4 955 g.skill 4gb ddr3 WD caviar black 750 gb Windows 7 64 bit home premium
Yesterday I wanted to use my HP laptop with my TV so I connected it using an hdmi cable. Everything connected fine and I opened up my cyberlink youcam software to adjust the camera settings. I got up for a minute to do something and when I came back the computer had gone to the blue screen of death (displayed right on the tv screen). The error was SYSTEM_SERVICE_EXCEPTION. This is the first time this happened so im not sure what to think. According to the HP website all of my drivers are up to date so I don't think that would be the problem.
I attached the dmp file and screenshots of my system specifications.
A couple of weeks ago this started happening : "Internet Explorer Unhandled Exception in third party module and should be closed. We are sorry for the inconvenience." Send Report Close . Then IE closes and reopens. As many as 3 - 4 times on the same site?
Here is my info : OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit Processor: AMD Athlon(tm) 7550 Dual-Core Processor, x64 Family 16 Model 2 Stepping 3 Processor Count: 2 RAM: 2942 Mb Graphics Card: NVIDIA GeForce 6150SE nForce 430 , 128 Mb Hard Drives: C: Total - 293688 MB, Free - 84392 MB; D: Total - 11554 MB, Free - 1256 MB; Motherboard: PEGATRON CORPORATION, NARRA5, 5.00, 100669550003562 Antivirus: avast! Antivirus, Updated and Enabled
Since building a new computer a few months back, I have been having issues with BSOD's while playing certain games like Battlefield 3 or Wow. But Skyrim and others are fine. I've tried many different drivers for ati and I'm currently using 11.12, but crashes still happen. I don't believe its a overheating problem as the temps are all low. WhoCrashed suggests a driver issue and has singled out ati as the possible issue a few times.
GA-990XA-UD3 AX6950 1bg AMD Phenom II x 4 965 G.Skil 6b (3x2bg) RAM
Do these crash dumps show any type of noticeable pattern for the crashes?
I've got a new install of Windows 7 Ultimate x64 on new hardware - a Foxconn motherboard replacing an older faulty EVGA motherboard. Since install, I've had several explorer.exe crashes, and a few bluescreens.SFC /scannow came back clean. A basic memory test (windows internal test from boot) also came back clean. Running full disk check after posting this. See error description below and attached dump logs.
Well every time i start up my computer i get this error message "Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click quit, the application will close immediately." Access to the path 'C:windowssystem32dllhost.exe' is denied. These are the details....See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.UnauthorizedAccessException: Access to the path 'C:Windowssystem32dllhost.exe' is denied. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.Delete(String path)