Installing Windows 7 On A Linux Machine?
Dec 21, 2012I recently bought Dell Vostro 1550, it came with linux installed on it. I want to install windows on it, Please guide me in proceeding further.
View 2 RepliesI recently bought Dell Vostro 1550, it came with linux installed on it. I want to install windows on it, Please guide me in proceeding further.
View 2 RepliesHow do i uninstall any linux distro after successfully installing both windows and linux.i dont want to lose my MBR. [or] will it (Windows) rewrite it again.i am a bit scared to do it myself as i was going to do a secure deletion of the partition.
View 5 Replies View Relatedinstall linux ubuntu on top of my windows 7 , i have a hp pavilion notebook dv-6 2155dx 4gb ram 500gb hdd it comes with windows 7 pre-instal , is there anyway how to get back to my wondows 7 i don't have the cds for this notebook?
View 6 Replies View Relatedi bought a laptop with linux installed in it but i already had a windows 7 from my old pc so how do I install do a clean install on this lap top?When i try it says it can't be installed
View 9 Replies View RelatedI've never used Linux and cannot figure out how to make it go away. Purchased Windows 7 Home online and tried to download it.Unfortunately I can't figure out how to run the installation... and now my computer won't even connect to wireless.
View 1 Replies View Relatedi had two os win 7 and backtrack5 in separate partitions and today i reinstalled win 7 but now it does ask me to choose between the two even i can't see boot screen to choose ,it automaticaly loads win 7 without asking me to choose , i waant see the boot screen with where i can choose which os should be loaded.
View 1 Replies View RelatedI have a Samsung N120 Netbook that came with Windows XP. I tried to run Linux Mint as a 2nd operating system, but I kept getting errors and I became frustrated with it. Ever since then I have only used XP, but every time the computer starts up it goes into Grub and I have to choose to enter XP. Basically what I am looking to do is remove all traces of Mint and Grub and I suppose XP for that matter and upgrade to Windows 7. What is the best way to do that considering I have a netbook which does not have a CD/DVD drive?
View 9 Replies View RelatedI was trying to install a ubuntu distribution to my primary hard drive (along side Windows 7) and at 99% of copying files the setup reported there was not sufficient memory to install backtrack. I cannot boot back into windows 7 as the computer resets before getting past the boot screen (shows 'starting windows' as normal then the screen blacks and takes me back to BIOS). this process loops unless I select windows repair option, which does not fix the problem. The Backtrack live CD won't let me delete the new, half-installed partition, so therefore I cannot change the windows partition back to it's usual (small) size of 55GB.
View 1 Replies View RelatedI recently purchased a netbook on ebay with Linux Mint pre-installed. I want to rid of Linux and install Windows 7 Ultimate, however the only device I have to date is a 2GB SD card as I've either lost or broken my USB's or external HDD's.. Is there a way to create a bootable SD card with a small downloadable copy of Windows and install it to the HDD? Then download a 'full' copy of Windows to install that and activate it with a key?
Otherwise I'm going to have to go out and get a USB stick. Or is there an easier way with mounting etc?
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies View RelatedI purchased a computer that has windows 7 home premium installed. I also have a critical app that can only run on XP and the manuf. tells me that the app runs into problems when running on Windows 7's XP emulation. I installed a second HD in the PC, and it recognized and gave it a drive letter. Formatted it to make sure it was clean. (It was previously installed in a Dell with XP.also bought an XP SP3 OEM license CD, and followed the instructions in the tutorial on the subject. When trying to boot off the XP CD, I got a Blue Screen indicating that the installation was halted, damage to the machine, blah blah.
View 8 Replies View RelatedI did the same as this fellow. I have a fresh HD, mad a partition on it, booted from the 64bit CD. It let me go through the entire process when it came time for the ssystem to reboot I received and error message "cant run the 64 bit windows 7 on a 32 bit system". I can not get passed it each time I boot I get the same thing
View 3 Replies View RelatedWhen installing win 7 on an LG laptop the machine went off on restarting. i had just upgraded the ram to 1.5gb there was 512 mb on bank 1 and 1gb on bank2. when i tried to switch on the machine nothing happened i removed the battery and AC power. tried it on ac only the ac indicator on the machine was on but still the machine didnt come on i put back the battery still only the battery and ac indicators where on still machine couldnt come on what do i do
View 1 Replies View RelatedMy machine has been stuck on installing this update all night. I think my hard drive may be full, what should I do? Been meaning to format that thing and reinstall windows to it since its just a 40 gig SSD.
View 3 Replies View RelatedI am doing a clean install using the upgrade DVD but on a virtual machine (on a Mac using VMWare Mac Fusion). Everything goes smooth and as per the tutorial except that once I arrive to the "Windows product key", it does not recognize the product key. I skipped that step and completed all other steps as indicated. However, I was unable to activate my windows 7 (last step) as it mentioned that the product is only for upgrade from older version and not for a clean install.
I do have windows XP copy but I would rather do a clean install.
I downloaded and installed Ubuntu and sectioned off a part of my hard drive for it. I intended to have it set up to run both windows 7 and linux together and let me choose which boot disk I wanted to use at start up. Ubuntu took over and so I read through some forums online. I can now get to the Windows 7 loading screen but it freezes there. I have my install disc and was hoping someone could assist me with getting windows 7 back. I do not care if I loose Ubuntu. I am currently sitting with the Administrator: X:windowssystem32cmd.exe from the System Recovery Options Menu with my Windows 7 Disc in the tray.
View 2 Replies View RelatedI have installed Oracle VM Box and installed Win XP therein. All OK but do I need to install an anti Virus software to the OS in the VM Box or will the A/V on my PC protect it?
View 8 Replies View RelatedI am working on a Dell Studio 1745 running Win7 64 Home Premium. I need to run a piece of hardware (Tascam US122) that is incompatiable with the 64bit OS. My plan is to partition the drive and install Win 7 32bit on the new partition so I can run the mentioned hardware. I've done this on another machine (Dual Boot XP and Win 7) and ran into a problems with the bootloader. I learned to install older OS FIRST because of that. I'm wondering if installing Win7 32bit on a current Win7 64bit machine will cause a similar problem with bootloaders? I'd rather not have to mess with the bootloaders, but I really need to run this hardware.
View 10 Replies View Relatedi have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View RelatedI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
i was trying to install linux on a usb drive so i could easly have a portible computer in my pocket but when i ran the linux for the first time meaning the portible usb worked it reformatted my windows 7 ultimate and ALL the data i had on it i do need this data but i can deal without it all i need is to format my computer back to windows 7 ultimate.
View 10 Replies View RelatedI want to install Ubuntu Linux(latest version)concurrently with Windows 7 Ultimate(x86), so that I can Use both OS on my PC and just boot from whichever one I want. Is that possible, if so, advisable?
My specs: 2048MB RAM; Intel Core 2 Quad 2.66GHz
I have a Gateway netbook pre-installed with Windows 7 Starter. In just 7 months it has got viruses and is full of error messages, not able to uninstall the programs causing this mess, and my web browser keeps redirecting me to alternate websites which I never typed on the address bar. I am sick and think about completely deleting the whole C disk from the Windows 7 (backup my files first) and try to replace Windows 7 with some type of free Linux OS. My netbook has no CD drive nor floppy disk drive, only USB drives. My questions are:
1. Can I really get rid of all the Windows 7 files already pre-installed?
2. Can I install and run Linux OS efficiently in my netbook?
3. How can I install Linux OS on my netbook from a USB flash drive?
Does Windows 7 have anything like the Linux chroot?I have an application where some of the parameters lock up the system requiring a cold boot.I appear to be one of the very rare users with this problem.I'd like to run through more parameters to give the developers more specific information about what might be causing the problems. As you can understand, hitting a param and crashing can get tedious really quickly.I'm hoping there is a process that let's me isolate the app so when it crashes I can close it gracefully rather then cold booting.
View 3 Replies View RelatedWould like to know, I want to install Ubuntu Linux(latest version)concurrently with Windows 7 Ultimate(x86), so that I can Use both OS on my PC and just boot from whichever one I want. Is that possible, if so, advisable?
My specs: 2048MB RAM; Intel Core 2 Quad 2.66GHz