Installation Freezes
Dec 29, 2009
This is an msdn version of windows 7 if this matters.
I tried to clean install windows 7 x64 on a computer which before had Vista x86. I the first time though the install went and froze on extracting files. I looked on the internet and saw to remove anything that wasn't necessary so I left only the mouse, keyboard, and vga cable. That time the installer froze after it attempted to create a new partition to install on. I tried a few times over and even tried plugging stuff back in and it would always freeze there.
I tried installing in safe mode and that worked fine but it would freeze on completing installation after it rebooted. You aren't allowed to run that step in safe mode. I though the cause is most likely faulty hardware/drivers since safemode fixed the earlier freezing. I attempted to install only using the integrated graphics with 1 stick of ram to no avail. Just for the heck of it I tried x86 which did not work and installing off a usb with the dvd drive detached and nothing has shown any change.
I eventually gave up and for now I only have Vista x86 on the machine for now but getting a working install of x64 7 would be nice.
View 9 Replies
ADVERTISEMENT
Mar 2, 2012
I have a trouble installing windows7. I think the problem is that my motherboard and a new SSD(intel 320), that I've just bought,have a conflict. I have Asus Striker which is based on nvidia 680i chipset. It's not supported ahci. So, every time it stops at 81%.
View 1 Replies
View Related
Apr 24, 2012
I re-installed windows three days ago. Since then, it has completely frozen (requiring a hard reset) 4 times, twice in a row today, and twice in a row the day before yesterday.
My specs are as follows:
AMD Phenom II X6 1055T
M4A89GTD-PRO
6GB A-Data DDR3 RAM
ASUS EAH5770 CUcore
Windows 7 Ultimate x64
I never had freezing issues before my new installation.
View 4 Replies
View Related
Aug 6, 2009
SUMMARY: Windows 7100 x64 installation freezes on splash/loading screen during the first restart after the last step of installation.
Let me start by saying this all started 4 days ago when Windows 7 Ultimate build 7068 x64 randomly started refusing to let my router assign my machine an IP address. It was a hard-line connection and had been working fine for weeks.
No hardware changes, no software changes, no network changes, and poof--no connectivity. Other machines and OS's connected to it fine, and my machine connected to OTHER networks fine. Two days of router hard resets and windows registry hacks yielded absolutely no progress, so I arrived at a reinstallation of Windows.
I decided that since I was going to lose all data anyhow, I would take that opportunity to update the firmware on my SSD--which, if you've never heard of this process-- it is no small feat. After consulting with 4 IT professionals at work, whoring out 3 different PC's, obtaining a mild concussion, and an act of congress, I finally got a formatted, blank SSD with updated firmware ready to re-install windows to.
I created a 7100 x64 installation disc using Microsoft's ISO and booted from it. Installation went smoothly all the way up to the very last step (when the screen resolution changes from default low-res to OS-worthy normal resolution) and then setup says it needs to restart one last time.
It appears as though this time when it restarts, it actually boots from the hard drive, rather than the installation program. I got the animated windows icon with the black back drop, and then before the OS pops up it just hangs and freezes.
No keyboard input is responsive (ctl + alt + delete doesn't work) once it freezes, and a "repair installation" just yields a "Windows cannot repair this installation" message. I tried everything I can think of and there is no way to get past it. Botting it in safe mode just says "Windows cannot boot in safe mode because setup needs to complete first."
For sanity's sake, I wiped the disc again and installed XP x64 and it installed lickedy-split just fine. I don't understand though, because I was running build 7068 no problems beforehand, and it wasn't hard to install at all.
View 5 Replies
View Related
Apr 16, 2012
I have had a boot error and i have formatted my hard disk. I have inserted windows installation disk,it freezes at 99% at the first installation part, i cant even move the mouse. Pls help fast, tried everything ; writing from cell phone . I have no pc now , i even tried connecting my hard disk to another pc. and installing windows from there and it doesnt work.
View 5 Replies
View Related
Jan 21, 2013
I bought a Toshiba laptop it came with windows 8 and I wanted to install 7. I deleted the hard drive and when I start installing windows 7 it freezes right away at "starting windows". After this, I put windows 8 cd into it and setup started.
View 3 Replies
View Related
Aug 1, 2009
I installed win 7 RTM build 7600, the install process finished without any problems.
but after first reboot, the OS doesn't work, i see the main screen , but when i click on some icon, or press start etc. the system freeze for 10 min (aprox...)
after that the operation preformed, and the when i click on anothrer icon (do another operation) it freeze again.
any idea, what can it be ?
View 9 Replies
View Related
Mar 21, 2010
I tried many times to install 7 ultimate but it just freezes at expanding files even the 3 dots freeze i tested my ram and disc for errors but everything is ok i left only 1 ram but nothing i disabled all the peripherals in my mobo but nothing also checked my hdd for errors and its ok aswell..xp and vista install without problems..
System Specs: MSI 975x Platinum PowerUp Edition
Intel Core 2 Duo E6600
2X1GB DDR2 Memories
EVGA 9800 GTX+
Seagate 320GB
View 4 Replies
View Related
Aug 11, 2010
My Windows 7 installation freezes every time at the "starting windows" screen right after the little orbs come together to form the windows logo. I have let it sit there for hours and nothing changes. I am doing a fresh installation on a new build.
It seems I have literally tired everything to get this to work (changing bios settings, unplugging unessential usb connections, etc.). When I boot in safe mode the installation gets further along to the "windows is configuring your computer for first time use" but eventually just leads to an error saying that setup cannot finish in safe mode and requires a reboot.
My guess is that maybe this is some sort of driver issue? I have no way of installing any drivers though if I cant even get the OS to install. I am getting extremely frustrated with this and I am amazed that its not working.
specs:
motherboard: msi p55m-gd41
graphics card: Nvidia GTS 250 512MB
2 x 1GB DDR3
Intel i3 530
250GB Maxtor HD
View 9 Replies
View Related
Aug 27, 2010
The installation is done from dvd and worked just fine.
Win 7 Home premium
mainboard Asus M2R32-MVP with bios update v 1109
OCZ PC2 6400 2 GB (have 2 of those took 1 out for installation)
Nvidia Geforce 9800 GTX+
AMD Athlon 64 X2 dual core 4000+
Barracuda 7200 SATA 250gb harddrive (ST3250820AS)
DvD/cd TSSTcorpCD/DvDW SH-S183A
as well i unhooked all usb devices
clean install, worked fine, but after install, the desktop would come up and nothing was working after, just freezes up.
View 8 Replies
View Related
Oct 22, 2009
I just got a copy of windows 7(64-bit ultimate, because its from my college its the upgrade version) and I'm having some install troubles. The installation keeps freezing right when it finishes loading the dvd.
Currently on windows xp. We know the dvd works (tried it in a different computer) and the dvd drive in this system works (tried using different operating systems). I can move the mouse around, and no keyboard shortcuts appear to work. I had the windows 7 beta installed a ways back, so I know the OS works on this system.
View 3 Replies
View Related
Jan 3, 2010
ok there is another thread about this problem but that is my friend helping me out this ir really my computer i built. i have never built one before so there might be hardware issues who knows, but in the selection screen where you choose where you want to install windows to it has my 500 gb western digital (blue ranked) drive and if i try to click next ot creat a partition it will freeze up plus i cant seem to get into bios because the wireless keyboard i bought gives a error message in startup.
so i have to wait untill windows installer opens to plug in the wireless transmitter i think there is a solution in repair my pc but i dont know it sry for the wordy question but i realy need this pc to work because of it being my first one ive built. if you need the specs ask but im honetly to lazy to get the paper work from frys and type it all up right now please repond and answer will do i will try anything!!!
View 8 Replies
View Related
Feb 29, 2012
My toshiba C675-S7200 Freezes when formating, at the step completing installation
View 1 Replies
View Related
Sep 1, 2010
I got the upgrade ultimate win 7; i am upgrading to 64 bit from xp pro 32; as directed i am going with the clean install; my system is already partitioned; at first i jus loaded the disc and change my start up to boot from disk and it would freeze at expanding files tried 3 times and all froze at different %s; after reading a few blogs i disconnected all usb's, multi card reader, all other disc drives and only kept the one running this disk; took out my 2x1GB RAM and left the 2x2GB to only run one channel;i did leave my usb mouse (Logitech MX revolution) and had to connect my key board for a sec when I had to tell it to start win normally since I interrupted boot, but disconnected again; after all this the upgrade seemed to be going awesome i selected my the partition with XP already to wipe out (150GB) and went all the way to completing installation and it froze! so i restarted after 1 hr of waiting and let it run all the way to booting from HDD and error came up saying installation not complete, restart to complete but it just keep coming up, so i started from scratch and now i froze again at expanding files..
View 9 Replies
View Related
Nov 12, 2012
Bought a new a new Sapphire AMD/ATI Radeon HD 6570 1 GB DDR3 Graphics Card and installed it into my pc. Also changed my PSU FROM 350W TO 450W. Installed the latest drivers.Now, the problem started with BSOD first. Right after 15 minutes of starting up my pc, BSOD appears. Later I uninstalled the drivers for the card and installed it again, now the computer totally freezes. This happens while playing games, or while hearing music or browsing net.
View 9 Replies
View Related
Feb 5, 2013
I am trying to install Windows 7 Home Premium in a Compaq SG3207LA but I've run into the following issue: During the installation process, the computer freezes at random intervals, which makes me have to restart it by force. I was finally able to complete the installation and then it froze again while I was installing some application software (on normal mode).At first I thought that the power supply could be causing this issue. I checked it and measured its voltage levels and they're OK. Then I tested the hard drive using a couple of bult-in stress tests from a LiveCD (booting from it), and they completed without any errors.I then started Windows in safe mode and it doesn't freeze at all. I ran again other stress tests and again, they completed successfully.I was thinking that maybe one of two options could be the root cause of this issue:
1) The SATA controller in the motherboard - but in this case, the stress tests would show some sort of error, or it would freeze in safe mode as well, wouldn't it? I haven't yet tested with an IDE hard drive because I don't have one.
2) Some device in normal mode could be using an IRQ that is being used by some other device - this would explain -in my humble opinion- why it doesn't freeze en safe mode while it does in normal mode. But I don't know how to find out which device since this computer doesn't have anything added to it - just the onboard hardware from factory.And before I forget, I tried with 2 different installation DVDs, so I don't think this can be caused by a failed media.
View 7 Replies
View Related
Jan 30, 2012
So I just received some new computer parts today:
AMD Phenom II x4 960t
8gb patriot pc3 10666 ram
ASUS M5A78L-M LX motherboard
I've installed the new parts but am having a lot of difficulty installing windows. I've tried installing both windows 7 and winxp multiple times with no luck. Both of the CDs have worked in the past, and there aren't any visible scratches or damage to them. Win7 and xp freeze at random points during the installation, usually during the "completing installation" or unpacking files stage.
I've tried the installation with two different DVD drives, with only one ram stick, various bios settings, etc. One thing that I've also noticed is that it will fail to boot unless being powered off completely. For example, after the initial stage of copying/unpacking files the usual reset that windows does to continue with the installation results in only a black screen (no beep).
However, when I power down the computer completely then start it up, the installation Is able to continue but only to eventually freeze. One install did actually work, however after installing a few drivers it started freezing while windows was starting up. It would start in safe mode and I did a system restore but it continued to freeze. I figured at that point I had nothing to lose and began trying another reinstall - and now it won't work at all.
View 7 Replies
View Related
Jun 12, 2009
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
View 3 Replies
View Related
Sep 18, 2010
I am trying to install Windows 7 64 bit on my system and it freezes during expanding files. I searched all forums and information thats available online, tried everything that was listed but no solution yet.
My system is Foxconn P9657AB-8EKRS2H LGA 775 Intel P965 Express ATX Intel Motherboard, Intel Quad Core Processor, 6 GB RAM on 3 slots, I had a 250 GB before this process but i bought a 1 TB 7200 RPM HD thinking that it would solve the problem somehow.
I took out all USB items including mouse & keyboard and using PS2 mouse/kb now. Also took out 2 RAMs leaving only one 2 GB. Now the machine only has the mother board, processor, video card, 2 gb ram, ps2 mouse & keyboard, and the monitors.
I checked BIOS, and i have the latest update. Tried everything on BIOS from setting it to Safe Mode, Disabling all USB ports, Internal Audio Device, and pretty much everything that i found online. Im just yet to flush the BIOS, change DVD drive and install it from a flash drive.
View 9 Replies
View Related
Jun 22, 2012
I am trying to install windows 7 64 with a new M3A79-T. It keeps freezing at expanding files with error 0x80300001. I figure this might be due to missing sata drivers but when i click load drivers during the installationwindows doesn't recognize anything. I tried with the mobo support dvd and i tried burning drivers from the mobo website and using that dvd. In either case i can browse to the dvd but all the foldersin it are empty, so nothing to install even though the driver are definitely there. when i click on scan
View 7 Replies
View Related
Dec 30, 2010
I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
View 6 Replies
View Related
May 18, 2012
I just turned on an almost new build pc to install windows 7. The entire pc is a new build except the hard drive that has a good copy of xp installed. I am trying to install a new copy of windows 7 on the hard drive. So I turned the pc on and go into the bios to set the DVD to boot first. So windows starts to install and the window is loading bar comes up. After the bar gets over half full, the screen drops and there is a line of h's on the left side of the screen and the installation freezes.
View 2 Replies
View Related
Jun 1, 2012
Ok so yesterday I did a boot and nuke, completely wiped the hard drive because Vista had made it crash pretty bad earlier. Did plenty of check disk and memory tests beforehand and everything was fine.
Now, I am trying to install Windows 7 and I get to completing installation and it tells me it can't finish because an installation file is corrupted.
I have formatted the hard drive to no avail. Right now I am cleaning the disk through cmd prompt. The DVD is a valid copy, purchased from a military store, brand new.
View 6 Replies
View Related
Oct 12, 2009
I ordered a Windows 7 Home Premium Family pack about 2 months ago and it arrived last week. While I wasn't expecting it until October 22, I figured "why look a gift horse in the mouth". However, when I try to install it I hit a problem. I had Vista Ultimate installed and attempted an upgrade. Everything went fine until I got to the "Completing Installation" part. At this point the installation just stops. I've left it sitting here for over 8 hours with no results. I have tried doing a clean install, deleting and formatting the previous Windows drive, and always the same thing happens. There is no error message, it just stops. When I do a hard shutdown and reboot, I get the message that the computer experienced an unexpected shutdown and to reboot my computer. I get the same message when I reboot. I called MS who told me that support will not be available until 10/22.
View 9 Replies
View Related
Jul 31, 2010
I recently finished building my custom pc, and tried installing Windows 7 Home Premium on it. I got to where it says "Windos is loading files", the white bar filled up, then it would repeat but slower. So far so good, but then it took me to the screen with the background, where one would normally log in to a user account, but it was completely blank, except for the cursor. So I rebooted the PC and tried reistalling it, and then after the "Windows is loading files" screens, it just gave me a blank black screen with only the cursor visable. I tried this several times but always got the same result. Now, i just the blue screen of death.When i don't boot from the CDROM, my computer freezes at "Verifying DMI Pool Data....." I tried resetting my CMOS, but that didn't change anything, so i'm pretty sure I'm getting that message because there's no operating system because Windows 7 won't seem to finish its installation. The HDD i bought said it came prepared for Windows 7 so there shouldn't have to be any formatting or whatnot done. I am thoroughly perplexed
View 9 Replies
View Related
Apr 26, 2010
This computer had Windows Vista installed and the hard drive crashed... So I bought a new Seagate 500g hard drive. I have tried installation of Windows 7 about a half dozen times; always with the same outcome.I noticed that the installation hangs while completing the installation after the display is switched to higher resolution.
View 1 Replies
View Related
Apr 27, 2012
[code]...
I have been trying to CLEAN INSTALL windows 7 64bit or 32bit. Ive tryed both but neither seem to work. I've made a bootable USB with both iso's. I've burned both iso's to DVD's. With every try to install it i get the same results. It gets past the "windows is loading files" screen, then once it gets to the "starting windows" screen the 4 orbs show up start to make a circle and freeze. It doesnt go any further.
View 1 Replies
View Related
Nov 28, 2012
i have random freezes sometimes they are glitchy and rarely bsod all on bootup or up to about half hour in (which also turns of the mouse). also Internet doesn't autoplay playlists and all sugestions next to the video are black. this started a few weeks to a month ago, first it seemed just a minor annoyance but it started to become more often the last few days. i've tried some checks but without success.
also i remember the week before those crashes that twice the screen driver crashed for a second or 2 and then a message popped up about how a monitor driver crash was adjusted, always when i played a certain game that is still in beta so i taught it was the game.
View 14 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
