Install Windows 7 On 2nd HD Without Damaging OS On 1st HD?
Oct 2, 2010
I am trying to install windows 7 to the second hard drive in my laptop in a manner which ignores the first hard drive completely.My laptop contains 2 hard drives. The first drive (with respect to boot order) contains a Safeguard-Easy-encrypted Windows XP, and I would like to install Windows 7 to the second hard drive. After installing Windows 7, I would like to be able to select the hard drive to boot from using the boot menu of the laptop's BIOS.The installation went smoothless, but - as expected - damaged the MBR and the bootloader on my first hard drive.
I am able to repair the first hard drive (using Linux and the dd command line tool), but even after hours of googling and trying, I cannot figure out how to manage to obtain a working windows installation on the second hard drive - I've tried several things: I copied the MBR from the first hard drive to the second, I copied the first blocks of the primary partition of my first hard drive to the second, but all this didn't help. When booting from the windows DVD, I cannot use the bootsect.exe tool as only the partitions of the first drive are visible (parted.exe shows the second drive but not it's partitions, even if I select the second drive to be active)
I would like to free up some space on my computer. I had a trial of Microsoft Office Home and Student 2007 but never used it. When I try to uninstall it the computer will not.
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I get as far as connecting USB - Windows acknowledges the connection but then never finishes the installation. Downloading and installing a driver from HP site didn't help.Know that I had originally following HP's instructions and attempted install w/o CD and with the printer USB connected during first installation. This failed same as all subsequent installs. I'm also running XP mode on this machine but had not started XP at the time of printer install.
I have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
During the installation process of Windows 7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D).However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are the device drivers?
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
My Acer 7736Z-4809 laptop (pre-installed w/ Windows 7 Home Premium 64bit, so I don't have the Windows 7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked. I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive."
Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse). Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
i have NVIDIA GeForce 7900 but it wont install in my windows 7 Ultimate,i use Mobile Intel(R) 45 Express Chipset Family(Microsoft Corporation). when i try to uninstall my graphic cards to install NVIDIA GeForce 7900 it installs but does not work
so I'm trying to install windows 7 again. I got a virus for some reason, I couldn't start up my PC anymore. So I formatted everything in the windows 7 installation(you know before the installation begins). There is nothing left of my old files. So after windows expanded the files it's starting to install the features, but then I get some error saying: could not set the offline locale information Error code 0x80FF000. After that I get a lot of errors saying that files are corrupt and that I have to run checkdisk utility. I don't know how ts me how to run that without having windows on your PC.The windows 7 dvd is fine, because I used it before on the very same computer and it worked. Only this time I'm getti
I recently reinstalled a version of Win 7 64bit..It was working but was having some problems with programs when I try reinstalling I get a point where Windows is wrapping up the install then quits because of a conflict, but it won't say what the conflict is..after fighting with it all evening I finally rolled back to win xp and ran upgrade advisor and found a problem with my motherboards lan card not being compatable..any thoughts on how to make win7 install so I can just install manfacturer drivers?
Microsoft Win Xp PRo SP2 AMD PhenomX2 555 8GB Ram but Xp only sees 3.25 3.21GHz
Non Comp device Realtek PCIe GBE family Controller (Realtek Semiconductor Corp.
We don't have compatibility information about this device.
I was using windows 7 professional and Ubuntu in my Dell Inspiron 15R laptop.. Recently when i select windows 7 its shows a screen that says windows is loading files.. and then re boot..But i can use Ubuntu.. When i tried to re install Windows it stucked with an error..But I re installed Ubuntu.. In the first time it also had a problem.. But succeed in the second attempt..
I've a customer whose Win 7 Home 64 bit won't install all the updates. He's got a list of ~24 updates that, when installed, results in error code 8007371b or 80073712. I've run SFC successfully with no errors as well as AntiMalwarebytes. Also ran MS Fixit 8025769253168492.4.1 which said it found 2 errors and fixed them (but it didn't really). Curiously, when I ran this util in Safe Mode, it reported back that two errors were found but only one could be fixed. Also ran MS Fixit 50123 successfully. Downloaded and ran the Update System Readiness Tool which found no errors to fix. Booted in Safe Mode and also in Clean boot. Still could not successfully install the updates.The Windows Update troubleshooter was run but it too didn't fix the problem.customer had tried the Upgrade route from an ISO he made and it ran to about 75% completion but then failed. He said the failure point happened when the upgrade was installing applications (???? ) or something like that.
