Install Windows 7 To The Striped Drives So The OS Is Striped

Jul 12, 2010

I basically cant get to an answer that has worked. I have to bare drives. both 320 gb blues from WD un formatted. I was to install my windows 7 onto them Raid0 style. I am running a P5q-Deluxe with ICH10r. I have downloaded all the drivers I think I need but dont know where to jump. The board comes with Drive Xpert which blows when it comes to trnsfer rates. I also dont want to install win 7 to on HDD thenset up the array and have the OS running on one drive while the rest is striped.

been at it for a couple weeks. I have updated the bios of the build and have the matrix drivers on a thumbdrive. Just dont know where to go from here.

View 4 Replies


ADVERTISEMENT

Striped Hard Drives One Failed And Is Now A Cd Drive

Jul 3, 2012

I had a striped hard drive set up because I thought it was cool to make 2 500's a 1 tb. it broke. but now one of em went off the reservation and now wants to be a cd drive after reformatted the drive that was working.can't see the errant drive in disk management but in computer (windows 7, custom build) it's my new cd drive witch claims to be my H: drive.

View 3 Replies View Related

Dell Inspiron Zino HD Constantly Crashes - Blue / Black Or Striped Screen

Dec 28, 2011

Running a Dell Inspiron Zino HD. Constantly crashes, get either a blue screen, black screen or stripes. Usually says something about a crash dump but goes blank before I can read.

View 2 Replies View Related

No Drives Found In Windows 7 Install

Oct 30, 2011

my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)

- I've also tried the Clean Installation Guide posted here, no difference.

- I've tried formatting it in Disk Management, still no detection.

I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?

View 8 Replies View Related

How To Install Windows 7 On Two Hard Drives

Apr 30, 2010

I have a HP Pavilion dv9800. It came with Vista and one 250 GB HDD. I added a second internal 250 GB SATA HDD. I got the second drive formatted and so it showed as a second drive where the HHDs are displayed. I didn't have any Vista OS software on it (to my knowledge, as far as I could see) but I could use the drive for extra storage, etc.I went to add Windows 7 with an install disk. I would like to simply replace Vista with Windows 7 and have the second HDD usable as extra space, so it would serve the same function as it has with Vista. However, when I used the install disk it asked me which drive I wished to install Windows 7 on. I installed it on on the second HDD only, so now I'm running Vista on the C: drive (and it's on D: Recovery too) and Windows 7 on the drive added second. can I replace Vista on C: (and D) and then use the other added HDD for storage, etc? In other words, I want only Windows 7 OS on this machine, but want to be able to use both drives, with a similar configuration as I had with Vista.

View 4 Replies View Related

Install Two Hard Drives Using Windows 7?

Mar 8, 2011

install two hard drives using windows 7

View 1 Replies View Related

Install Windows 7 No Drives Detected?

Jun 10, 2012

SO i have just built my first custom PC and I know it is all installed correctly, except possibly my hard drive. So I get to the window where I am supposed to select the drive where windows 7 will be installed. No drives are detected... so this means my hard drive isnt being recognized... I just got th 6822148837 and my case is weird, im not sure if i installed it all the way. My case is the Thermaltake Level 10 GT and it has hard drive slots and some kind of connector in the slot so that it plugs in automatically. I think it may not be connected fully, like I might need to attach a cord too.

View 13 Replies View Related

Clean Install Of Windows 7 - No Drives Were Found

Jan 29, 2012

I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.

When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.

When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.

This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."

I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?

View 6 Replies View Related

No Drives Found - Windows 7 Fresh Install

Oct 22, 2012

So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.

View 9 Replies View Related

Windows 7 Wont Install Onto A Pair Of Raid Drives?

Sep 15, 2010

I recently sold a pair of drives which i had installed Windows 7 onto.The drives were configured as AHCI in the bios.The buyer has come back to me witht he following message: i received the hard drives today. i can install windowsd 7 in the 2 drives. whats wrong? i try in raid mode and non raid mode and nothing.says that i can install files in this discs. what operating system was there befShort of them being damaged in transit I cannot see any reason why they would not allow Windows 7 to install on themAm I missing something? I have asked him to supply details of his motherboard. Are there any other questions I should ask?

View 5 Replies View Related

Two Hard Drives Already Loaded XP/Windows 7-Install Into One Computer?

Apr 10, 2012

I have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?

View 7 Replies View Related

Moving Windows 7 Install Between Partitions / Drives Or Controllers?

Sep 17, 2012

Is it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.

FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}

I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller

FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}

View 3 Replies View Related

Clean Install Of Windows 7 - Rootkits On Hard Drives

Oct 13, 2012

How to run through a quick clean install of windows 7 and my hard drive as I believe I have some nasty root-kits. All I need to know is where I can download windows 7 again - I have product key). And some basic steps doing the clean wipe. Also could you take me through partitions and how to do one? I want my hard drive completely clean restoring my system.

View 19 Replies View Related

New Install, New Drives

Feb 10, 2010

Well I`m wondering what`s the best way to install Windows 7 in my case. I currently am running Vista 32bit on a system with 3 mechanical drives one of 500gb which i`d like to keep and 2 older and smaller drives which eventually I`d want to get rid of. I just ordered the following:

Windows 7 Professional - Retail version
A 120Gb SSD HD
A 1TB mechanical hard drive.

What`s the cleanest way for me to install Windows 7 64bit? I was thinking of unhooking all drives except for the new SSD, install Windows 7 onto it and then after hooking back up the old Windows Vista 500gb drive and formatting it. Is that the best way of doing? Or is there a cleaner/better/easier way?

View 4 Replies View Related

Lost Both DVD Drives After Install?

Jan 20, 2009

I have recently installed 7 and find the OS great so far. Much faster than Vista . One problem i am suffering is that I have lost both my DVD drives. When I look in Hardware I can see them - they both have a yellow exclamation mark and that the digital signatures are not signed. I cannot play or record from them. how to make the drives show in Explorer and make them operational?

View 9 Replies View Related

Clean Install -2 Drives

Oct 26, 2009

Presently running XP home, want to install Win 7 Home Premium. I have two internal drives , one [c drive has all the programs] the second drive [d has all the documents, pics data]. Can I safely do a clean install on c-drive without backing up the data on d-drive.

View 8 Replies View Related

Install Drives Missing

Apr 28, 2009

I'm having an issue installing Windows 7 (7100) 64 bit. (I have also tried 32 bit and 32 bit v7000)
#Note, I burned the disk to a TDK-R 4.7gig Dvd using imgBurn at x2 write speed and verify. I also use the disk to install a guest os in vm workstation. So I know the disk is fine.

The install fails shortly after clicking "Install Now"

At first I get a cd/dvd driver device error or w/e. I load the drivers for my dvd drive. All goes well.

Then I get to the area I would normally select the install drive/reformat section. Instead of seeing C: & D: as usual the list is completely blank.

This is where I'm stuck and I have no clue how to fix it.

View 6 Replies View Related

Install Same Os In Different Hard Drives?

Jan 29, 2012

Can we install same OS in different hard drives?

View 2 Replies View Related

BSOD When Install Something On Secondary Drives

Feb 24, 2010

I am an IT professional however cannot figure out this issue on my my machine and its driving me nuts

I have Win 7 64 Ultimate on RC build 7100 and everything runs fine, however since next week the OS will expire and my machine will reset every 2 hours therefore i upgraded to the official Win 7 64 Ultimate and the blooming machine gives me a BSOD every time I try and install something on my secondary drives (d: e: f: )

Thought it was an AVG issues or access privileges since my other drives where formatted on other previous OS`s (c: for windows, d: for games, etc.) However it now even seems to be doing it if I try and install stuff on C: - now I have a hunch it might be AVG FREE causing the issues, dunno, any suggestions would be appreciated.

View 9 Replies View Related

OS Install And No Hard Drives Showing Up?

Dec 9, 2012

I'm installing Windows 7 on an older PC. It was running on it before but my hard drive bit the dust. When I boot from the install disk and go to install it, there are no hard drives listed and the message says "No drives were found. Click Load Driver to provide a mass storage driver for installation."

It's an old Dell Dimension 8300 with a couple WD hard drives in it, a 250GB and a 500GB. I could get the model numbers if that's necessary.

View 6 Replies View Related

Clean Install On Multiple Partition/physical Drives

Oct 21, 2009

On my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.

The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)

drive spaces: C: = 40gb D: 200gb E: 200g

View 6 Replies View Related

Missing Drives After Install Xp For Dual Boot With Win7

Nov 20, 2009

I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,

any suggestions?

View 0 Replies View Related

Internal Drives Showing Up As External Drives?

Jul 21, 2011

I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.

View 5 Replies View Related

Error Message "No Drives Found" On Boot Up After New Build & Install?

Jan 2, 2012

Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]

View 9 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

Non-System Drives Show Up As System Drives For Backup?

May 30, 2011

am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.

View 3 Replies View Related

Windows 7 And Flash Drives

Jul 21, 2011

I've got three different (but identical, to look at them) MicroSDHC thumb drives. When I tried them in my new Win 7 PC, it assigned a different drive letter and description to each, under Devices with Removable Storage. Even though "Hide empty drives in the computer folder" is checked in my Folder Options, it's not working -- they're still listed under Computer, grayed out. Worse, when I fire up Windows Explorer, it occasionally (but not consistently) gives me a series of errors about the drives not being available -- and this continues to happen even after I uninstall them in Device Manager.

View 5 Replies View Related

Can Map But Cannot Access Drives From XP To Windows 7

Jan 17, 2011

Basically, I got 2 laptops. A new Win7 Home Premium and an XP SP3 netbook. Both are on the same workgroup. Both have full admin privilege accounts. Shares/drives are enabled as I have always done on Win environments. I am getting Access is Denied when I try to access my Win7 C: and D: drives from XP. I can see the Win7 laptop, I can even map the drives, but cannot access Win7 drives from XP. From Win7 to C: and D: on XP is no problem at all, as always. I am aware of that sharing root of drives is inadvisable. However, I am on a fairly secure home LAN [sole user] and I want to do this.

View 14 Replies View Related

Windows 7 Doesn't See One Of Drives?

Jan 9, 2013

Had to rebuild my DAW after my old mother board ate it. Got a new mobo and ram and put it together today. Installed Windows 7 Ultimate 64 bit. In My Computer, Windows only sees 2 of my drives. The 3rd drive with my projects on it isn't there. It shows up in the BIOS and the System Management Storage app as healthy and active

View 2 Replies View Related

Deploying Windows 7 With Usb Drives

Aug 12, 2011

The company that I work for has satellite sites in some remote locations where network access is simply to slow to deploy images through. We would therefor want to put a image of windows 7 with all the drivers, and some of the most common software used included, on a 16 GB USB drive.So far I have been installing Windows 7 on a reference computer, with the drivers and software that I needed, and then syspreped it and used imagex to capture the image.Is there a better way to do what I want? Maybe by using MDT?The image must contain drivers for different Dell models (they seem to use most of the same drivers anyway).

View 2 Replies View Related

Map Network Drives From XP To Windows 7

Jun 21, 2010

I have 3 Windows 7 Ultimate computers hooked up to a ATT FastAccess DSL line. They are in a Homegroup. I also have 2 Windows xp Pro computers that are connected to same the FastAccess DSL. From the XP can see all Windows 7/xp computers by browsing the "entire network".

On one of the Windows 7 computers is assigned to Susan. Susan Windows 7 PC has a 4 Tb external hard drive attached to it. I created a folder on the 4 tb external HD called Frank and shared it.

What I am needing to do is on Frank's Windows XP Pro computer is to Map Network Drive and Map to the "frank" folder and have it reconnect at logon. Problem is when it goes to map the folder it wants an id/password to connect to the "frank folder". I can enter the credentials that Susan uses on her PC and the drive will map just fine but I need it to map without asking for any credentials. I already tried "reconnect at logon" and it shows in explorer but wants a password to reconnect.

I was thinking if I create a Frank user id and password on Susan's PC then use those credentials when frank tries to connect to the folder "frank" from his XP Pro PC then that might work. I am not sure.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved