Increase display size by Ctrl + mouse wheel up, but it switches back to smaller size randomly (it seems).I'm using Windows 7 and a Logitech wireless mouse with 27 inch monitor.E.g., In this forum I Increased the display then entered the thread title, but when I clicked in the message area the display size decreased. Only the left mouse button was used.I'm also using a Logitech touchpad and the Dragon Naturally Speaking software, but have the same problem with the touchpad off and DNS not running.
I have MS Access 2010 & have a database that has been about 45 MB in size for 2 years. About a month ago I noticed it now is 67 MB. I compact & repair every time I save it which is twice a month. I've gone back & did a compact & repair on the 67 MB file but it does not change.
I must have looked at & changed something without realizing it. The actual number of records appears to be correct. How can examine and/or compare tables or other internals between the two sizes? I've seen a program called AccdbMerge come up on a few Google hits & was wondering if anyone ever used it?
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
say graphics driver stopped resonding and now it does it any time when im on my computer and now completely makes my computer freeze i have tried updating the graphics drivers twice and has worked until i tried playing minecraft again (and i am not going to stop playing minecraft)
I am currently attempting to have folder sizes shown in lists. I have 'display file size info' checked in Folder Tips check box, to no avail. How can I get Win 7 to display the size of each folder, as it does with file sizes?
So, I got a Benq G2400WD and a 32 inch LCD TV connected to my computer, to my ati 4890 graphic card, and i wonder if i could set a different font size/dpi on my LCD TV than whats on the Benq?
About a month ago, one day when I turned my computer on, the BIOS display side had shrunk, leaving a 1 inch black border around the edge of the screen. This went away when I turned the computer on the following day, but has now come back. It doesn't seem to have any other adverse effects, but it bugs me. Can anyone explain why this might be and what I could do to make my BIOS full screen again?
I have a netbook with a 10.1 inch screen, and a 22inch LCD display panel. When I connect my netbook to the display, the words seem too small at 1920x1080 resolution. If I set the font size to 125% or 150%, then it would be too big once i unplug my external LCD and use the netbook's 10.1 screen. Setting the 22 LCD to a lower resolution makes the text look very blurred, so that's not an option.
Is there anyway/script/program to automatically change the font size when I connect/disconnect the LCD screen?
I currently have a dell Inspiron n7010. I checked to see if I could run Diablo III, and found that I lack the Dedicated Video Ram of 256MB. My current dedicated Video Ram is 64MB. My Graphics card is Intel(r) HD Graphics. After reading several sites, it appears that this graphic card is impossible to upgrade, so I was hoping I might be bale to increase the dedicated ram so I could install Diablo III.My apologies if this has been answered previously. I would gladly read the original thread if someone posts a link to it.
i have an intel HD graphics 1307mb size and 2.9 gb ram (out of 4gb)one question, if i increased the ram will the VRAM increase? cuz i have it only 128mb
No updates or new applications installed, but recently boot time has about doubled, with the longest stretch during the amber (yellow) monitor light on and blank screen after Windows Starting and before the blue splash screen.
OS Name: Microsoft Windows 7 Ultimate Version: 6.1.7600 Service Pack 1 Build 7600 Other OS Description: Not Available OS Manufacturer: Microsoft Corporation System Name: KOKUA System Manufacturer: System manufacturer System Model: System Product Name System Type: X86-based PC Processor: AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date: American Megatrends Inc. 1005, 8/24/2010 SMBIOS Version: 2.6 Windows Directory: D:Windows System Directory: D:Windowssystem32 Boot Device: DeviceHarddiskVolume1 Locale: United States Hardware Abstraction Layer Version = "6.1.7601.17514" Time Zone: Hawaiian Standard Time Installed Physical Memory (RAM) 8.00 GB Total Physical Memory 8.00 GB Available Physical Memory 6.48 GB Total Virtual Memory 12.3 GB Available Virtual Memory 10.8 GB Page File Space 4.30 GB Page File D:pagefile.sys
So when I do speedtest and select nearest host, I usually get 3 ping and (average) 75mbps. After installing windows 7, I recently found out that ping result always is 50, and download speed capped to like 55mbps.Also, I pinged a game I play with command prompt, I get about 165ms averagely on XP, and after Windows 7, it went up to 189-192.
I have a problem with downloading a file above roughly 80MB it just stops I tried chrome,firefox and opera and nothing works. On Firefox and Chrome the download just stops on Opera the speed changes to unknown and it stops downloading.I don't have a wireless connection I use modem and my net connection should be okay since on my old comp with same net it worked without problem.
I'm running Outlook 2010 with about 5 separate POP 3 accounts. I archive regularly and compact after archiving. After a lot of trouble cloning a new C drive to an SSD, Outlook, along with a lot of other software, began acting strangely. Everything has pretty much been resolved except for the Outlook problem.
For no reason I can isolate, Outlook will suddenly close, giving the message that it had to close and it will now try to retrieve my data. It does so, unless I was in the middle of composing an email - that will be gone! Sometimes, instead of closing, it freezes and says application not responding.
I checked the disk for errors using scan now and it's fine. I've run memtest and it's fine. I've run in safe mode and it just shut down with no comments. In working my way through suggestions on this board, I just ran Sysinternals Process Explorer until the error occurred and went back to normal. In looking at Process Explorer, I'm afraid the actual data is overwhelming to me. However, I'll attach everything I have.
When I marked a whole folder or a couple of files in Windows Explorer in Windows XP then the sum/total size of all marked files is (was) shown in the status bar in the bottom of the WinExp window.
I am running out of space on my system drive (120GB SSD with < 6GB remaining). It happened in only 12 months. I'd like to know where all that space went, which files are using it. So I'm looking for a way to rank files by size regardless of their folder location, largest-to-smallest, ideally without a full scan of the disk if there are internal indexes that have this info.
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
Since upgrading to Windows 7 Home Premium I can no longer use any of the HP Printing software that came with the HP 5280 All In One Printer which I had set up with custom paper sizes to print large panorama photo's,eg 420mm x 210mm.I know the printer is capable of printing photo's this size as I have printed many panoramic photo's in this and similar sizes when I was running XP.I have set some custom sizes in Print Server Properties and the settings are being saved there but they do not appear in any paper size lists in Windows or in the HP printer preferences.This is the procedure I'm following.1) Click start menu,then Control Panel,and finally View Devices And Printers.2) Click printer in the list(HP 5280),then click Print Server Properties.3) Click Create New Form,type a custom paper name in the Form Name text box and enter the desired paper size under Paper Size.Click the Save Form button,and the new form is present in the paper list
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
I am trying to download the windows 7 OS into a DVD,however after certain period of time the download stops itself without any warning.I tried this different times but the same problem.I checked with my ISP in order to look if there is any problem with my Internet.
I could be on my computer for hours at a time and after approximately 6 hours of being logged in, my internet browser just stops working. When I try going to a web page, it doesn't even try to load. It gives a very quick blink to the icon on the tab but that's it. I'm not receiving any windows errors. The way that I've been working around this problem has been to log off(or shut it down) then log back on, then I have a few more hours before it does it again. When the browser stops working, "bittorrent" still runs (a program that needs internet access). This isn't a recent problem that I'm having. This has been going on for almost a year now.I'm running Windows7.
