As v have seen some software like key lemon were the program gets executed before the windows logon page. i have done a voice verification software i do no how to integrate with windows.
View 1 RepliesI installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
View 6 Replies View RelatedI used a very simple program in August when the RTM first came out to change the logon screen without having to deal with the registry. Now I can't find it; it was something that didn't require installation, because it doesn't appear in the start menu. Just needed to point to the jpg I wanted and it changed it for me. Can someone point me in the right direction?
Eh, I just found it online again: Windows 7 Logon Background Changer - Customize your Windows 7 welcome screen wallpaper.
I a machine with Win 7 (Utlimate) with several users (lets call them A,BC..). I have installed MS Virtual PC on it and have 3 Virtual Machines (all Win 7s - lets call them X,Y and Z).
I want to know is it possible that if User A logons on, VPC X gets fired automatically, if User B logons, VPC Z gets fired?
I just want to know how to create a user profile logon for the docked and undocked logon in Windows 7?
View 1 Replies View RelatedI would like to add a program to my Start up so that if my PC restarts from an update or something else then this program will automatically start up.
View 2 Replies View Relatedif I have a program that is starting with Windows that I do not want to start with windows I can go into msconfig and remove it from the services and startup, but I have a program that I want to start with Windows that isn't listed there so I don know how to do it or if it is even possible.
Specifically, I want Outlook to start with Windows because it is my work computer and I have Outlook open at all times on my machine, so it would just save a little time each day if it started automatically. I might also like to have Chrome start as well because the workorder system is accessed from a browser so again I will need that as well.
I suddenly start getting error messages saying skytel.exe and RtHDVCpl.exe, opera.exe can't start, system error. DSOUND.dll missing. I have tried reloading realtek from my cd and it still doesn't solve the problem. What can I do? My operating system is Win 7 32 bit and my Laptop is MSI CR500
View 1 Replies View Relatedwhat is currently the best program to customize the look of the Windows 7 start button?
View 4 Replies View RelatedI accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin.
View 5 Replies View RelatedEverytime i start my computer and after putting my password, at the desktop, a box appears saying that program manager stops responding and it is needed to restart the pc. it does it ( by himself ) and it is a cicle that dont stop, only if i manually close
View 9 Replies View RelatedEvery time I try to get administrative access, I type in the password and it says, "There are currently no logon servers available to service the logon request." I'm able to sign in as the administrator, it's just when I need to gain administrative access that this error pops-up.
View 2 Replies View Related" The program can't start because xerces-c_2_8.dll is missing from your computer. Try reinstalling the program to fix this problem." Just got this.
View 2 Replies View RelatedI have a little program that I want to load and run at the start up of my Rig, how do I do this? Is there some folder I have to put it in ? If so which one and where is it ? I have looked for a start up folder but can't see one any place.
View 4 Replies View RelatedI want to use several of the Sysinternals suite of tools. Some have a GUI,but many don't. Ignorant me just double clicks on their generic icon and a brief flash of the command-line interface screen and nothing more. Can someone point me to some information on the use of this type of program?I'm not a complete novice on the use of the command prompt screen, as I use it for sfc /scannow, ipconfig, pinging to find my latency, etc.
View 1 Replies View Relatedim looking for a program to change the start orb/bar however I ONLY want suggestions to programs you have used,Also i would prefer editting the registry to using a program, if someone knows how,
View 1 Replies View RelatedI can't find how to start up a program automatically when the computer comes on. It was easy under Win xp but I can't find the command.When I go to msconfig I can see the programs that are loaded but don't see how to list a program to be started.
View 5 Replies View RelatedI started installing Veoh Web Player but decided to abort the installation. Now, every time I boot up, I get a message asking: A previous software installation was not completed. Would you like to continue installing Veoh?
I've tried everything I can think of. Even installed Veoh. But kept getting the message, even after Veoh was installed. Then I removed Veoh using uninstall in Control Panel and I still get the message every time I start up.
I installed a program to my main user account which is an administrator account. When I click on the program to open, the mouse pointer changes like the program is going to load and then it stops. I logged into my second user account which is also an administrative account and the program opens without any problems.
View 1 Replies View RelatedThe new feature of Windows 7 that puts the little arrow on the right side of certain recently used programs, and when expanded shows different tasks. How do I disable this feature? I don't want to see the little arrows, all I do is open the programs, the arrows sometimes get in the way and annoy me. I searched but these keywords didn't yield anything specific to what I was looking for.
I assume it's pretty easy to change, I think I did it on this (Build 7000) computer, but I just setup a Vlited RC1 and can't figure out how to get rid of the arrows it added on the right of the programs on the start menu.
I don't like the way Windows 7 show me the "startup menu"... what I mean is I don't want to see the few software or document i've open recently when I press the "Windows icon" (aka Start).
I need to press "Show all programs" to see all my folder. Even if I go in the config of the toolbar, and I choose 0 to see the last program (by default is 10), it's only show a big white startup menu, but i need again to click (or leave my mouse for few second) the "show all program".
I just want to know of there is a way to see directly the "program" folder when I click the windows logo.
I hope this is the correct place to ask this question. I come from Window XP. I am used to see my long list of programs all spread out so I can see what I have w/o scrolling.
Is there a way to fully display my installed programs w/o scrolling in such a small window above the start button? Have I asked this clearly? LOL. Sometimes, I may not iterate what I am trying to ask.
I have one program in the start menu that will not start , I have to start it manually when I re-start win 7 . Ideas ? I did have a program to give programs admin permissions so they would start automatically but can't seem to find it ..
View 4 Replies View RelatedDownload a Shortcut that Opens the Start Menu in Windows.
View 0 Replies View RelatedHow to Pin or Unpin a Program to the Windows 7 Start Menu ?
View 0 Replies View RelatedMy computer recently prompted me to do a virus scan and after rebooting, it erased all the files and programs on it. I read some posts stating to "unhide" all the folders in windows explorer to help the situation. That seemed to restore alot of programs, but I still can't launch certain programs off the Start Menu nor can I see their shortcut in Windows Explorer. I'm able to open files using those programs from Windows explorer, I just cant open the program itself from the Start Menu. The folders of those programs on the Start Menu say "empty" and no program is displayed.
View 1 Replies View RelatedI recently switched from Vista to 7 (Clean install) and Moderwarfare 1 played fine with vista, however I now get an error when trying to run moder warfare 1, "The program can't start because d3dx9_34.dll is missing"I know 7 uses dx11 which, just like every other directx version, is backwards compatible with the other versions, and I would assume especially 9. I've reinstalled moderwarfare, that didn't work.
View 9 Replies View RelatedAll at once I can't use chrome and get message: program can't start because oleacc.dll is missing. This seemed to start soon after using a disk cleaner---but I've used it many times before with no problems. I uninstalled and reinstalled chrome Xs2 to no avail, and I ran a windows "skan" from the start menu recommended from elsewhere.
View 4 Replies View RelatedI'm just migrating over to Windows 7, and am having a hard time with the start menu. I've downloaded Classic Shell so the menu looks like XP again, but I noticed that when I look at 'all programs' some of my programs aren't there. Turns out Windows 7 has two program folders, apparently one is for purely 64-bit programs and the other for ones that still use 32-bit. Does anyone know how I can get both of these folders to show up in the start menu, preferably combined? At the moment, I can only find the 64-bit folder, and can't find the 32-bit folder in the start menu at all.
View 5 Replies View RelatedI have a lenovo g570 model number 4334. My roommates borrowed it one night and got a virus on it from watching p--n. I did a system restore on it to get rid of it. Now my computer wont go past the starting windows screen and instead goes to a windows box and says," The program can't start because CRYPT32.DLL is missing from your computer. Try reinstalling the program to fix the problem." I borrowed somebody's computer thats exactly the same as mine and created a boot disk to try and fix it but then it stops and says that its missing ootmemtest.exe or something like that.
View 1 Replies View RelatedI do not have AVG installed. I believe this was effected by a virus (as just before I could not boot I had the "Win 7 Home Security" virus pop up). How do I boot up my computer without losing my files? I've tried the Googles, but nothing is working. I do not have back-ups that would be of ANY use, and this hard drive is vital to my academic and personal future. It is a Toshiba Satellite Series L655D-S5109. What is %hs? How do I boot around it? Is there a way to load from a DVD or USB drive a fix for %hs being missing? Is there a way that I can protect my files at this date and do a full system wipe? Is there anything I haven't thought of? I need these files...I am an intermediate to advanced user, though not worthy of "Shibboleth." I have learned two things from this already: The importance of back-ups, and the importance of regularly updating security definitions. Note: not a BSoD, because error arises on start-up, not killing my processes and such.
View 1 Replies View Related