i have connected my phone to to my laptop which contain genuine Windows 7, but after work the name remain in other devices list below all my hard drive list, how can i remove that device after use
View 3 Replies
I have not used any special techniques for removing a usb device, I use backup drives, flash drives, printer, and scanner plugged into a usb hub, I've never done anything more than just unplug the device from the usb hub, for the backup hard drives I do unplug their power source then disco their usb connection but other than that I never use or consider to make sure I get a okay to remove the usb device. I am using Windows 7, all three versions on three different computers, what is all the hype about to use the "safely remove usb device"?
View 8 Replies View RelatedIf you remove a printer using Devices an Printers will you delete the driver or do have to do this through the Print Manager
View 2 Replies View RelatedI need to remove the mouse from devices and printers but i click uninstall and it says its removing it, the bar in uninstalling devices box just keeps going and nothing happens. I cant remove it from device manager since it does not show up. How can I remove it?
View 1 Replies View RelatedJust got windows 7 32-bit. I'm stuck on is that no devices are being shown in the Safely Remove Hardware Dialogue box. I know I have a device in..it's my MP3 player which I have just copied songs over too and I can play them. There is no icon in the systems tray either. I then looked around the web and found a page showing how to create a shortcut on the desktop to activate the dialogue box.
Point target to ":C:WindowsSystem32
undll32.exe shell32.dll, Control_RunDLL hotplug.dll"
Created it, got the box up but no devices showing in it when the mp3 player was plugged in. Pulled out the mp3 player without removing safely first as didn't know how....not ideal.
I have a Microsoft 5000 bluetooth mouse which doesn't work ever since I updated my bluetooth drivers. My bluetooth keyboard and numpad work fine. I want to re-pair it with the computer but Windows will not display any device which is already installed when looking for devices and my mouse currently shows up in the devices and printers window. I want to remove the mouse from this window but it is the only device which doesn't have a "remove device" option when I click it. The keyboard and the numpad both have this option...
How can I remove this device so I can pair it again with the computer?
is it very highly recommended to do a registry change - USB Port Remains Active for Disabled or Safely Removed USB Device to power down usb devices like external hard drives after clicking safely remove on windows 7i started using windows 7 recently and the first internal hard drive which i used for external storage on the netbook - windows 7 became unusable after 4 times' usage. Later, I found out about external hard drives still spinning after safely remove or shutting down the computer , on windows 7.i want to protect my other external hard drives so, hence my question above.
No one around me did the registry change as they said that as long as safely remove feature is used, it is enough already despite that the hard drive is still spinning.i hope that i can find at least one person here who is very serious in caring about his/her external hard drives, to give me his/her input.I notice windows 7's usb issue started back in late 2009. I wonder why Microsoft never include its remedy - USB Port Remains Active for Disabled or Safely Removed USB Device in the updates. Is there any bad effect when using the remedy
I like a clean notification area, and one thing that's always bothered me is the "Safely Remove Hardware and Eject Media" icon for my ReadyBoost flash drive. I don't understand why it doesn't ignore all ReadyBoost devices in the first place. Any fix for this that doesn't involve disabling the function altogether?
View 4 Replies View Relatedhow to fix the following popup error message which i receive on each startup:ERROR: Unable to start the bluetooth stack service
View 1 Replies View Relatedplese i dont know how to download Bluetooth for my computer which is sony vaio
View 1 Replies View Relatedhow can i get free blutooth peripheral device driver ?
View 2 Replies View RelatedI have a lot of external drives connected to my computer (Windows 7 Ultimate) and am contently connecting and disconnecting external cards and devices and sometimes I have up to 22 connected devices.When I need to safely disconnect a device and open the "safely remove device" list, the devices are listed in no logical order (image attached) and I have to spend precious seconds searching for the device I need to disconnect. A few seconds are not a lot but it's frustrating doing this many times a day. know a way to have the list sorted either alphabetically or at least in the order they were connected?
View 2 Replies View RelatedI bought a Dell Insiron XPS 15z laptop which has blutooth hardware but does not have any software to run this hardware?
View 3 Replies View Relatedi cant connect nokia bh503 bluetooth headset in my hp laptop
View 2 Replies View Relatedanyone can help to get a driver for Nokia BH-503 blutooth headset
View 1 Replies View Relatedi am trying to conncect my nokia headset bh-503 with my lenovo laptop,but this can not found drivers.how can i download he drivers to connect this.
View 1 Replies View RelatedI have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View RelatedI am attempting to uninstall (and then reinstall) Office 2010 Prof Plus. I am not able to remove it from Add/Remove programs, have read through some help info and attempted to use the Windows Fixit, Revo & Ripoutoffice2007, none of which have removed it (Revo didn't take it out and then pulled up a million 'left over' files, none of which I deleted).
View 2 Replies View Relatedcan i remove my flash memory without removing safely remove
View 2 Replies View Relatedi have an old windows xp pc that my son uses for chat and homework for printing. the problem i,ve now got is he and a friend of his has formatted the pc and installed windows 7.i do know that some of the devices do not have windows 7 drivers because i once checked when he asked me could he have win 7 on it. i didnt bother to upgrade the pc as there was no need.the problem he now has is that everything works but there is nothing on the monitor. it says no input. i have researched on google and the answer i get is because there is no win 7 driver for the nVidia GeForce FX5200.
View 6 Replies View RelatedI've lost all my usb drivers and windows will not connect or recognize any usb device when I install it. Here's the message I get from device manager:Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). I've tried everything possible to correct the situation even reloading the intel chipset from Asus web site. Windows no longer will detect a flash drive or external usb drive. I'm at the end of my rope and I don't envy the thoughts of a reinstall. Is there a way to reinstall the usb drivers?Any one can point me in a direction.
View 3 Replies View RelatedI am able to get into the BIOS with both USB and PS/2 devices (Keyboards, etc.) but one I boot into Windows I am completely unable to log on. Keyboard does not work, and neither does the mouse. They both light up, but I am unable to get other things to activate (caps lock key, etc.) and key presses do not work. This is with either USB keyboards and mice, PS/2 keyboards and mice, or a mix of the two (or all four attached at once!). Going into safe mode does not work -- once again, anything USB-based or PS/2-based ceases to function once windows boots, and therefore I am unable to log on in order to diagnose the issue.
I have re-set my BIOS to the default settings, and have removed anything which may provide my system with additional IRQ's -- including both serial ports and my LPT port (yes, this is an older machine). I have gone into the recovery console, and things *DO* work there, strangely enough. I do have mouse and keyboard support, but bringing the machine back to a previous state (system restore) does nothing to correct the issue. As well, the first few attempts provided me with an 0x800700B7 error message (very strange!) when the restore attempt failed. I got past this issue by choosing a restore point a few days in the past.
Once in the recovery console, I notice that it seems to be strangely deficient in tools that I would actually like to use. I am unable to bring up the MMC (and thereby the hardware devices applet), nor am I able to employ gpedit.msc in order to disable the login (boot straight into Windows). Essentially, it seems that my only tools are the command line, and about the only thing that I have found that can be launched from the command line - regedit. I am running a personal copy of Windows 7 Professional, with all of the latest updates and patches. I have MSE (the newer version) installed and have also installed malwarebytes anti-malware. Nothing found to date.
my computer is Toshiba satellite L300. It has a problem of not recognizing any devices. At first my usb ports were having power cause the mouse was lighting when i put it on the port, but now nothing is happening.
View 1 Replies View RelatedI just recently installed windows 7 home premiuim on my windows vista home premieum computer. When my computer booted up with windows 7, everything worked perfectly and had no problems. I turned off my computer for the night and the next morning when i went to turn on my computer, none of my usb 2.0 devices (mouse, wireless adapter, etc.) worked. The only thing that does work is my keyboard and its a PS/2 keyboard.
View 3 Replies View RelatedDoes anyone know how to remove the "safely remove hardware" icon in the taskbar? I do not mean hide it. I have my icons always show in the notification area because I don't like the arrow icon either.
Any ideas?
On my Windows 7 my Devices and Printers keep loading. I enabled the Bluetooth support service but problem didn't solved. I don't have a Bluetooth device on my computer..
View 9 Replies View RelatedI've been having a major problem with for over several months. I've recently started to make music and I'm interested in using some of the MIDI capabilities on several of the instruments I have, mainly drum machines and synthesizers. The problem is Windows 7 is not detecting these MIDI to USB interface devices and instruments I have.I've tried using three interface devices so far with no luck what-so-ever. I've tried different two types of MIDI to USB cables, these are generally small, and they both work because I tested them on my friends Macbook and they were 100% functional.So, I decided maybe I should get a better piece of recording equipment, thinking there would be better platform support, so I purchased a Focusrite Saffire 6 USB, low and behold, I had the same problem!The MIDI to USB cables and the Focusrite interface detect the MIDI IN coming from the MIDI OUT port of the instrument, however Windows is not reading the converted MIDI information running through the USB cable into the computer.Here's a list of the solutions I've tried.Updating my chipset drivers. Uninstalling and re-installing chipset drivers. Un-installing and re-installing my sound drivers. Using the latest USB drivers (and even beta drivers) and utilities provided by the interface products. Trying different USB ports assuming it was a power issue. Uninstalling and re-installing the product drivers, rolling back to older drivers as well. Updating Windows. Tested under two different DAWS; CuBase and Sony ACID. I also tried different stand-alone soft-synths, they didn't detect the MIDI devices either. I've tried a few obscure MIDI drivers I dug up from a few places, but to no avail, I un-installed them. I've tried sacrificing 3 goats to Microsoft, that didn't work either. I'm convinced that this is a Windows / Hardware compatibility issue. I'm tempted to get a Mac product so I don't have to worry about this time pilfering fiasco. If anyone would like to take a stab at this I would be very grateful.Here's my system specs:
[code]...
I have a computer on which the usb devices stop working/receiving power once windows has loaded (they work up untill windows finishes loading). I installed windows on a different disk everything else remained the same, now the mouse and kb work. Is there a known fix for this? If not is it possible somehow to transfer the user settings from one disk to another, so i get the same settings on the new drive perhaps (mind you, no mouse or kb support on one of those windows)?I have tried a lot of windows disk fix things, none of them have any effect, very strange, have never seen this before. Usually i get pretty much everything fixed using google, but this one.
View 6 Replies View RelatedI was using my laptop fine for a few month now. I let a friend use it for a week and he "somehow" got a virus . I wasn't too stressed as i didn't have any personal information or anything important on it. So i reinstalled Windows using my flash drive, the iso from the Windows 7 Professional 64bit CD i had, and the Windows USB-DVD tool downloaded from Microsoft. I changed the boot priorities in BIOS to my USB drive, went through the installation setup and formatted all the partitions on my HDD and installed windows 7 professional 64bit. It loads up and for the most part works fine.First off my resolution will not go above 1024 x 768. Even though previously it was a lot higher, can't remember exact resolution, but was higher than that. Next, when i go to device manager, the following are listed under Other Devices with Yellow Exclamation points by them; Ethernet Controler, Network Controller, PCI Simple Communications Controller, and SM Bus Controller. I've Googled, searched these forums, and tried each solution out there. But to no avail.I purchased the laptop from Best Buy but i do not have any kind of recovery CD's.
Basically i think windows is not properly recognizing the hardware i have installed. Because the laptop screen can go to a higher resolution, but windows won't recognize it properly. Even Windows Aero isn't working properly, and the computer is marketed as a gaming laptop, so i know it has the graphical power.Feel free to explain in detail as i'm pretty good with computers but this problem has me stumped. And for a person that will not stop until something is fixed, its driving me crazy.I'm doing this off another laptop i have that has access to the internet (obviously). So if there are any programs i need to download i have the ability to do so.
I have no speaker sound. Play back devices chart only shows HDMI device to my TV. Nospeakers options and no sound. No recent device installs or deletions. No software changes except update on Java and Adobe.
View 2 Replies View RelatedI have below configuration.
Board - DQ67SW.
CPU - i5-2500
HDD- 1 TB 2 HDD's
SMPS/Power Suppply 600W.
RAM- 8 GB 2gb in each slot.
OS - Windows 7 Ultimate edition.
My machine gets hang or get rebooted frequently. What can be the cause. Do I need to purchase high volt smps.
