I had Windows XP on my Western Digital drive and I installed Windows 7 on my Seagate drive. I want to remove Windows XP from the Western Digital drive and format it to use as a data drive. How can I do this?
Disk Management:
Seagate (C:) Boot, Page File Active, Crash Dump Primary Partition
Western Digital (D:) System, Active, Primary Partition
Can I make a dual boot for XP SP3 x32 and Win7 x64 on a single pc. Both will have their own hdd(primary master probably XP and primary slave Win7 x64 or other way around)...possible?
I'll have that project with an Asus K8V SE Deluxe mobo which is 64bit capable. Haven't tried it on that yet.(Using Win7 x64 on a newer pc).
I saw an old Compaq desktop with only 1.5gb ram with Win7 x32 and it was quite zippy(yeah surprised me really! ). It even had Adobe CS3, Cyberlink video editors(Power Director/Producer, Autocad 2005 in it in addition to Avast IS ver6(no firewall/behavioral shield, Comodo firewall(D+ max settings --sandbox disabled), standard Office 2007, PDFXchange Viewer suite etc..
Owner friend just did an experiment with that old Compaq and when it was finished invited us for a couple of beers and showed what he had done.
So me thinking....I might be able to try making that project but with an x64 capable mobo. Although I have not used x64 on it(even after I ditched it) it was zippy in XP x32 ram maxed out with Norton IS 2009 --with Malwarebytes, Superantispyware Pro/ ACAD 2008 / SAS Jump Statistical software / MathCAD / forgot the rest.
I have been trying for a while to install mac os x on my windows 7 pc i have followed hundreds of different tutorials and hit a wall at every one.
what is the best way to install mac os x on a single hdd? i no my pc is compatible with it i dont no where im going wrong.
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
I'm trying to install a new hard drive and retire my current one to backup and data storage purposes.
The problem is that I've installed Windows 7 on a hard drive with 2 partitions, an old XP partition (D:) and the new W7 partition (C:). At the moment the disk management screen looks like this:
What I am trying to do is delete the D: partition, and then copy/resize the C: partition including Windows 7 installation to my new hard drive (F:)
If I ignore the new hard drive and just try to migrate to a single partition, I can never get it to boot. I tried using Partition Wizard to set the C: as a primary, active partition, copied over the bootmgr and boot directory, then used bootrec /fixmbr and bootrec /fixboot to try to make Windows 7 bootable from just the C:, but it didn't work. All I got was "disk read error" whilst the PC was trying to boot off the C: (this is with all other drives disconnected...).
I could try to migrate to a single bootable partition from a 'dual boot' configuration?? I tried this video's advice and did everything as instructed but got the disk read error problem.
I've a Dual Boot with Xp/Win 7 on my office Desktop workstation. Window7 is the beta version of the Win 7. And like all other companies.... my company also want it's wallpaper and screen-saver on each machine ..... But i somehow manage to install Window 7 on my office Desktop.
Now i want to remove Window 7 partition and restore my Xp MBR and that too without using Windows Xp Bootable CD ( as CDs are not allowed in my company )...
How can i restore my Xp MBR while accessing my Xp Partition as i already have deleted my Windows 7 partition .
Tried tackling this one single-handedly to begin with and failed.
I have Windows 7 and Windows Server 2008 R2 installed as a dual boot, different partitions single HDD.
I want to remove the Windows 7 partition and keep the Win 2008. I do NOT want to lose anything from the Win 2008 partition. Taken from Disk Management.
Disk 3 with 5 partitions
1st - Healthy, Primary partition 73MB. (I thought this was system reserve but its not, leftover space from a previous partition change). It's currently mounted and completely empty.
2nd - Unallocated space 500mb
3rd - Windows 7 OS (Healthy - system, active, primary partition)
4th - Windows 2008 Server OS (Healthy - boot, page file, crash dump, primary partition)
5th - Unallocated space 8mb'ish
I haven't been using Windows 7 for years and want to clean this drives partitions up because it's messy and wasting space. I just need windows server 2008 as it's been used as a server for years and that's all I need it for now.
I want to safely remove the windows 7 installation and merge that partition along with the 1st and unallocated spaces back into a single partition where windows 2008 server resides.
Now I've tried tackling this myself and failed. I stupidly made the windows server 2008 partition as active which killed my boot and took me forever to repair with zero loss fortunately. Sadly it was as simple as using diskpart in a command prompt from win 2008 boot disk to make win 7 partition active again.
So, how do I do this? The boot manager must be on the win 7 partition as removing active killed it. The windows 7 boot (during startup) is long removed, system boots directly to windows 2008.
A while ago I bought some new big 1TB HD's and decided to install windows 7 Ultimate onto one of them. To make the transition from XP to 7 easier for me I decided to do a multiboot so i could switch back to XP if i needed something.Once i had everything the way i wanted it and i was no longer using XP i decided to remove the old HD. Also it was an IDE and it was cluttering up the inside of my computer. Now whenever I unplug the original HD i get a boot disk failure.my guess is that my computer is looking to the C drive for where to boot windows 7 but I dont know how to change it so that it looks to that HD instead.
View 2 Replies View RelatedI find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
View 6 Replies View RelatedMy computer stopped booting and only displays a black screen with a blinking white cursor on start up. I've used a recovery disk to attempt to restore windows back to an earlier point in time. While the restoration completed smoothly I still can't boot. I've also tried the startup repair wizard and it doesn't find any problems.
View 14 Replies View RelatedI had Windows 7 and Xubuntu set up in dual boot by EasyBCD, a well known utility.Today the linux kernel has been updated and, after the following reboot, the choice of Xubuntu OS at the dual boot prompt didn't work.So I went through Windows, launched EasyBCD to fix things and:
- changed the order the entries (Win 7 up, first)
- selected Windows 7 as default OS
- removed Xubuntu entry
- added again Xubuntu entry through EasyBCD procedure
- saved (maybe I should have saved after each of the changes)
When I rebooted I've found that two identical Xubuntu entries, each pointing to the Linux OS, and no Win 7.I've tried to access Win 7 by Grub, but it points to the dual boot screen, so I'm at start point again.I don't have the Win 7 disk but the usual recovery partition. No backup. Going through the recovery partition gets me back to the dual boot screen..Is there any way to put it in order again? Could you suggestions work in this case?I know that, from Linux, I can install and overwrite MBR with free mbr.bin
sudo apt-get install syslinux
sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
But I'm not sure it will give me back Windows 7.
I am trying to upgrade windows vista ultimate 32 bit to windows 7 ultimate 32 bit on a computer i built. I've tried custom installation and the recommended installation, but the same problem arises. The problem is, whenever the computer goes to restart, it does not boot back up. So, during the installation, it starts to restart, but does not boot back up, but the machine is still running.
View 5 Replies View RelatedI have been dual booting for about 6 months now with no problems.I installed XP first and then Windows7.When I boot the computer it goes to Windows7.It gives me the option on the screen to choose other operating system which I do.All of a sudden I can't get into XP,it just stays a black screen.So I booted back to 7 and checked the boot menu and only Windows7 is listed,don't know why,it was working fine till now.Is there anyplace on the computer where I can get my original boot menu back.
View 3 Replies View Relatedi have an acer aspire notbook with vista home premium original and fully licend by manufacture.. now when i installed windows 7 ultimate and activated it.. the boot menu become like this
windows 7 ultimate (recovered)
windows vista home premium (recovered)
now when i start windows 7 it starts with vista green bar not with windows 7 new logo..
how can i get back the original menu without the word (recovered) , and for sure get the windows 7 logo back .. with the activation validated with it.
On my Windows 7 at the bottom left it shows:Test Mode,Windows 7,Build 9780,Also I changed the boot screen but I can't now change it back to the default, I tried using the command prompt but didn't work.
View 1 Replies View RelatedI recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.
View 9 Replies View RelatedRight before a fresh install of Windows 7, I go into the BIOS and set the boot priority to boot from the CD first. So at what point during, or after, the installation do I go back into the BIOS and set the boot priority to boot from the Hard Drive?
View 7 Replies View RelatedWe have xen desktop in our office with win7 O.S installed. The issue is that all the files and folders opens on single click instead of double click. I checked the files and folder property and found, double click is greyed out. Please let me know how to fix this issue. We want to have double click activated for all the win7 machines
View 1 Replies View Relatedhow to club (combine) windows 7 with windows server 2008 in single dvd ?
View 5 Replies View RelatedI accidentally deleted some important files/folders which caused the whole downloaded videos/games get lost in a few minutes,i didnt even notice that it was deleting.I tried system restore but it didnt work,is there any other way to get your systems time back up for 2-3 days back?
View 6 Replies View RelatedMy older Win XP laptop's hard drive failed.
I restored from Carbonite online back up service to my current Win7 Laptop. In the restoration process, it created a user from the previous machine's setup. I now have 2 user's which I would like to replace with "NO USERS" (since I am the sole user). (I use individual file passwords to protect my personal or confidential files.) I can live with one User which would have control over the entire computer rather than an Administrator with other users with different levels of access.
I am concerned with possibly losing access to the files under the new user if I delete the current users.
I recently purchased a Dell laptop with Win 7 Home Prem. installed. I've been unable to discover if you can set it up to open files, etc. with a single as opposed to double-click of the mouse. I remember for sure that you could do this with Win XP.
View 3 Replies View RelatedI'm looking to move my Win 7 install from a RAID 0 (with two traditional HDs) to a new single SSD.
I have the new SSD installed in the computer and the system can see it fine. (In fact, I installed a trial copy of Win 7 and it boots up fine).
I'm not sure what's the best way for me to proceed. Do I make a disk image of the RAID partition with Acronis and restore it to the SSD? Any way I can set this up so I can keep my existing program files and installations?
I need to know how I can format a Raid Hard Drive to a Windows Format.
View 2 Replies View RelatedI have set up a network with about 20 computers all running windows 7. Any file I share is accessible to all the other computers on the network. My aim is actually to share files with specific computers on the network; not all
View 2 Replies View RelatedDo I need SQL server 2005 express on single machine running Win7 64bit ?The reason I ask is that I keep getting an update notice from Microsoft to install SQL server 2005 express sp4.That installation fails every time.I do not connect other devices to this computer except for a back-up external HDD.
View 6 Replies View RelatedI've viewed so many threads regarding the fabled 'Blue Screen Of Death' and was wondering if I was doing something wrong.....
See, i haven't had 1 single BSOD since I started using Windows 7 build 7000.
Has any1 else had as much good luck as I have or am I 1 of very few?
i got a copy of cod 5 waw from my friends pc but the single player is asking for a cd
View 2 Replies View RelatedI was running Vista and Windows 7 as a dual OS on two HDDs. I have just removed the HDD with Vista on it and reverted to a purely W7 OS however, when I now bootup, I am still seeing the message on screen giving the choice of W7 or Vista.
View 3 Replies View RelatedDoes anyone know of a program that will allow you to have a second taskbar on a single monitor?
I know the creator of Ultramon said he is considering adding support for this in a future version of the program, but who knows when that will be. I really can't believe no one has done this yet.
Any help?
I cannot aford to buy SSDs yet and wanted to know how if at all I would clone my HDD to my Raid 0 Dynamic HDDs, windows wont install to them, and casper just overwrites one drive killing the dynamic setup and making a second single HDD clone.
I am using the trial edition of the current version of casper and trying to figure out if buying the full version would make a difference, the original drive is a 1.5TB and the two Dynamic Drive Array are 1TB, all seagates.I have 24GB of ram, a 2GB 550 Ti and a LGA1155 2.8GHz CPU running Windows 7 Ultimate Premium 64bit with a passive 3D LG monitor trying to run five game Accts simultaneously with TS3, Skype, GB3, Spybot and Logitech Services in the back ground
