Hoping Task Scheduler in Windows 7 is set up the same as Server 2008 R2. I'm trying to find out where I can get information on how to read the hexadecimal output in the sixth column, "Last Run Result". I know that "0x0" means completed successfully and "0x41325" means couldn't complete but I'd like to have a list of definitions for the others that might pop up instead of having to work them out.
View 3 RepliesI need 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys?I am trying a view number but not success!
View 1 Replies View RelatedWindows 7 On a text file, .txt, it is possible to high-light and copy a row on a table. But how to high-light and copy a column.
View 9 Replies View RelatedYesterday i installed my new Windows 7 64 bits OS on my PC after the 32 bits i used for years.I reinstalled drivers for my Realtek soundcard (Vista_Win7_Win8_R270.exe downloaded on the realtek website and even the 6305_Vista_PG537 to try it) and i have some difficulties using the equalizer whereas before I did not with the 32 bits.Indeed when i'm trying to set the 16k column on the Realtek HD Audio, after entering my choice, the settings of the 16k column change and only for the 16k column ! I tried to register several presets but everytime it goes wrong changing the 16k.
View 6 Replies View RelatedI have created my own extension for a file, which when opened with a notepad, stores its content (properties) in xml format. I wanted to display these file properties in custom columns named like disk size, ram etc eg. like in windows virtual pc, the .vmcx machine has its properties in xml format, and in its folder, custom columns display its memory, status etc.
View 2 Replies View RelatedI'm looking to buy new DDR3 memory but I am totally puzzled by the CAS Latency and the numbers.It seems like the difference between a stick of DDR3 with 11 11 11 and 7 7 7 is only measured in nanoseconds, so how would the end user, we humans actually notice the difference between these specifications, or in fact can we at all.
View 1 Replies View RelatedI am using Excel, and the column and row font size is too small. how do I resize them
View 3 Replies View RelatedIs there a way to reduce the column width in Explorer to something less than 80 pixels? Some of the columns contain information that can safely be displayed in 50 pixels or even 30 pixels, and I would prefer to use that wasted space for other columns (e.g. the Name column).
View 5 Replies View RelatedWhen listing the installed programs there is a column called 'location'. How and where does this come from in the installation program? In other words in Visual Studio 2008 where does one put this entry for the installation to cause it to show up?
View 1 Replies View RelatedI am trying to print a document in Excel Starter 2010. The document contains the columns A to J and rows 1 to 466. When I try to print the document, only one column prints per page. I have tried selecting all the columns and changing the print selection but this just shrinks the column size, and prints it smaller. How do I change it so that I can print all columns A to J on the one page?
View 2 Replies View RelatedIs there a way to rename or create new sorting option with custom text ?there is a lot of categories, however i need to have my own custom labeled field then in the Detail view panel, by default, in the small size, there are these fields ready to edit:
- tags
- categories
- content status
the easiest way would be if i could rename those to my needs so it stays easily editable for the user?
change it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedWhat's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
View 10 Replies View Relatedmy dvd writer reads cds but not DVDs in windows 7
View 2 Replies View RelatedTLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
I bought my VGX-XL301 in August 2007 and it cam installed with Vista home addition and upgraded to Windows 7 Professional in April 2010. I have the computer linked to my Samsung HDTV via an HDMI connection.
Everything worked fine up until recently.
I am working on the computer and then switch HD inputs to watch TV. After a time the compuiter goes into sleep mode. The next time I want to use the computer, I press a key to bring it out of sleep mode. I switch it from the TV HD input to the PC HD input but no picture comes up.
I have to force a shut down by holding in the power button and then turn on. The PC then goes through the boot up and the PC picture appears, however sometimes it takes 2 or 3 forced shutdowns to make it work.
I have upgraded the driver on the graphics card as I thought that might be the problem.
Have a new camcorder, the videos from which I wish to record on a DVD for posterity and sharing.Apparently there are several modes that my PC asks about before making the DVD.I read, somewhere, that for the "best" pix quality, you should tell it to make a "Data Disk," and not one of the picture options.
View 9 Replies View RelatedI've read dozens of topics relating to these questions yet have found no answers. I'm looking for a software solution NOT hardware.
1. How can I record the Windows 7 Text 2 Speech voice?
2. How can I playback the recording through a program(WMP, MPC, etc) and have it go though the mic instead of speakers? Pretty much I want the text to speech to act as my voice for a mic. I don't care if there is no speaker output while this is happening.
Windows has a feature to allow you to output your computer to your HDTV right? (Via HDMI). But I'm building my new PC in a few months and was wondering if I was to connect my PC to my HDTV via HDMI, would it output to the TV during things like the BIOS and Windows setup? Or only if I tell ti to via Windows?
View 1 Replies View RelatedSince installing it, I had a problem with my sound, which was as the title states, no audio output device. I've been through several drivers, none of which worked, and I've also tried sound max, which has in fact worked, however I can't stand the little sound bar when you up or down the volume, and it's fairly unresponsive when I use the buttons on my laptop. So in all fairness, I just want the actual driver designed to work with this laptop.I do have a version of Windows 7 Home Premium, not too sure if it'd make much difference, however I'd rather not go through another OS install as I've got most of my stuff already set up on this now!I am good with computers so don't be afraid to get technical, but I just need another angle on this because it's most likely just something I'm overlooking.
View 3 Replies View Relatedi've twice installed latest drivers GeForce 285.62 Driver , i've been into nvidia control panel and then setup multiple monitors & it only detects my other vga monitor not the hdmi one, i'm using a brand new hdmi cable & can confirm i've connected it to the correct hdmi connector on my monitor, it has 2 hdmi ports and i've tried both, when i go into device manager & display adapters there is only 1 adapter that says nvidia geforce gt 545, should there be another 1 for the hdmi? i'm out of options, i even work in i.t as a breakfix engineer coming across similar issues like this but i cannot deal with this & really need some help so i'm really hoping someone will help me out here i'm wondering if its anything to do with my other hardware such as the xeon cpu? (a longshot but i've only just built this pc & never built a xeon system before & would normally go for core i5 or core i7)
View 7 Replies View RelatedI missed some cmd.exe output today and I would really have liked to know what that was. I know it wasn't malware, but that's not the point Is there a way to make cmd.exe copy all it's output to a text file automatically or something similar that I could use to check back on what my system did there?I already checked google, it said there's "no way". Only with powershell, but that's not exactly what I want because I don't really do a lot of that stuff, but I'd come back to it, if nobody knows anything else.
View 3 Replies View RelatedIm running 7 on my laptop, and im trying to get it to output only to my external monitor when the lid is closed. I can get it to extend my desktop, but when i close the lid, it turns off the external monitor. I have set Windows 7 to do nothing when lid is closed. Is there anyone else with this problem?
I have an Dell Inspiron 1525, with Intel x3100 integrated graphics, if that helps.
i m using window 7-64bit,having i-5 processor with nvidia geforce 410m gpu.hw can i use my graphic card for maximum video quality.
View 1 Replies View Relatedi have a dell core 2 duo with 3gb of ram, and an ati hd4650, when i boot up, both outputs get the boot up screens, when it gets into windows, the hdmi output appears to be unplugged(not available for selection, just not there) it is worth noting that it worked fine under vista, anyways, when i switch the source on my receiver, or turn it off, as long as it is plugged in, it then gets detected, and i can modify resolution, and apparently it is outputting sound as well, i cannot verify this because the receiver is OFF, tried various versions of the catalyst drivers, and one of them worked, until i went into the catalyst center to change something and it went back to what it was doing i feel it is something wrong with the windows side or the driver, ive tried upgrading to the x64 version, ive tried different cables, different ports/plugs, it just wont work, i have no idea where to look in the registry to change when it is detected, but when i turn off the receiver or switch off of that source, the monitor flickers and the output is detected, this is frustrating because i wanted all of my home machines to be on 7, and i really dont want to go back to vista.
View 1 Replies View RelatedThe subject of Acrobat PDF printer has come up before, here, and on other forums, but usually it's about installing the Acrobat PDF printer (or lack thereof after an install), this is not the case for this post.This topic is about having different behavour on two nearly identical machines. One PC can print from IE9 to the Acrobat PDF printer, the other can't and I can't figure out why.(the other one does create a PDF, but it's void of content except for the header/footer from IE)Here's the paramaers:
Desktop PC running Windows 7 x64 (w/updates to 9-2011)
Laptop PC running Windows 7 x32 (w/updates to 9-2011)
Both loaded with Acrobat Pro v8.3.1
Both running IE9 (32bit) v9.0.8112.16421
When I print to the "Adobe PDF" printer (print dialog box, where you would normally select your printer), the "Adobe PDF" printer is indeed listed and selectable, but after selecting the "Adobe PDF" printer, the next dialog box that is presented it the standard Windows "Save As" dialog box and this is where the weirdness starts... and the Laptop never prints the content properly.
Desktop PC:
Laptop PC:
The two "issues" I'm posting for help here are these:
1.) the Desktop PC actually prints the webpages into a PDF, the Laptop will not(on the Laptop, it does create a file, but always 1 page only, void of content except for the header/footer from IE)
2.) The Desktop install seems to know it's a webpage and uses some of the webpage URL/link as a suggested filename, the Laptop always inserts a random alpha-numeric filename as if it has no clue of the source.
I have spent hours looking at all available settings for both IE9 and Acrobat8 and they are both identical, I can't quite figure out why one prints the webpages into a PDF and the other won't. (both Acroat installations and updates are from the same disc).I've posted this on other forums before, usually all I get are the obligatory reply's like "oh you should try ***PDF instead" and "Acrobat 8 isn't supported in Windows 7"... etc. Well all that would be fine ...except... it does work on the Desktop PC so I can put to rest the "isn't supported" notion because it does work on my Desktop PC.
my old vista machine I could keep streaming audio while the screen went dark after 10min of no use. On the new 7 machine, the audio goes off if the monitor goes off and comes back on after moving the mouse to wake the monitor. Is there a way around this? I'd rather not have the monitor on for hours at a time when I'm not sitting in front of it.
View 6 Replies View RelatedSo I have a headset that runs audio through a 3.5mm cable and gets power from the USB, but the audio is coming through the USB instead of the 3.5mm and sounding terrible. How would I change this from outputting through USB and instead have it through the 3.5.
View 4 Replies View RelatedI have a Sony Vaio VPCEB4E4E. Just re installed windows and now I have no sound output through headphone jack. Installed the Realtek HD Audio driver from the sony website
View 2 Replies View RelatedFor the SigmaTel High Definition Audio or IDT High Definition Audio CODECs, is there any way to get bit-perfect output via the TOSLINK or RCA S/PDIF connectors?
The idea here is to have line-level output, no volume control in software, to an external device that will do the D/A conversion.
And, same question via USB...
Mic: Razer Carcharias
OS: Windows 7
Sound card: Creative Labs Sound Blaster Audigy SE
Just as the title says, my mic is only getting my computers output instead of its own input. It happened randomly, I walked away for a quick second and then it was like this.