So I have a headset that runs audio through a 3.5mm cable and gets power from the USB, but the audio is coming through the USB instead of the 3.5mm and sounding terrible. How would I change this from outputting through USB and instead have it through the 3.5.
I cannot hear any sound from my PC, I tried connecting through both the front panel and the back panel to no avail.I however did notice that the only panel option available on Realtek HD seems to be the Realtek HD Audio rear output and that doesn't work.It's quite frustrating because I can't hear any sound from my computer even when I used a headphone.
1. how do I change from Realtek HD Audio rear output ie back panel to front panel?
I first noticed this problem when I tried to open iTunes and it came up with the message 'iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly'. I also cannot listen to music or things online either.I have looked at my computer's device manager and can't find any catergory such as 'sound, video and game controllers', which one site suggested to try and check the sound card. I have also tried to update quicktime but that did nothing. I have also tried looking at 'sound' and under both the playback and recording columns it says that there are no audio devices installed. THis appears to be the common phrase along a problem with the audio configuration. This has not ever happened to my computer before and I have had it for about 3 years now. It is a toshiba laptop with windows 7 home premium.
I've read dozens of topics relating to these questions yet have found no answers. I'm looking for a software solution NOT hardware.
1. How can I record the Windows 7 Text 2 Speech voice?
2. How can I playback the recording through a program(WMP, MPC, etc) and have it go though the mic instead of speakers? Pretty much I want the text to speech to act as my voice for a mic. I don't care if there is no speaker output while this is happening.
Since installing it, I had a problem with my sound, which was as the title states, no audio output device. I've been through several drivers, none of which worked, and I've also tried sound max, which has in fact worked, however I can't stand the little sound bar when you up or down the volume, and it's fairly unresponsive when I use the buttons on my laptop. So in all fairness, I just want the actual driver designed to work with this laptop.I do have a version of Windows 7 Home Premium, not too sure if it'd make much difference, however I'd rather not go through another OS install as I've got most of my stuff already set up on this now!I am good with computers so don't be afraid to get technical, but I just need another angle on this because it's most likely just something I'm overlooking.
my old vista machine I could keep streaming audio while the screen went dark after 10min of no use. On the new 7 machine, the audio goes off if the monitor goes off and comes back on after moving the mouse to wake the monitor. Is there a way around this? I'd rather not have the monitor on for hours at a time when I'm not sitting in front of it.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , 32 bit Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-60, x64 Family 15 Model 104 Stepping 2 Processor Count: 2 RAM: 3006 Mb Graphics Card: NVIDIA GeForce 7150M / nForce 630M, 64 Mb Hard Drives: C: Total - 226384 MB, Free - 138411 MB; D: Total - 12087 MB, Free - 2026 MB; Motherboard: Quanta, 30D1, 85.26, None1 Antivirus: Microsoft Security Essentials,
i have no sound and there is no audio devices found in he device manager i tried to re- install windows 7 upgrade but the same thing no audio output is in stalled error on the speaker in the task bar?
i have a HP Pavilion dv6000. i upgraded from windows vista to windows 7. there's a red X on my volume and it says no audio output device is installed. in the Device manager there is no sound, video and game option-in the sound device the playback is blank.
with the audio and tough pad drivers not working in windows 7. I up-dated windows XP to Win7 ultimate, and now their is no sound and the tough pad does not work. These are the error codes from msinfo32!
A.High Definition Audio DeviceHDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30B2&REV_1000\4&166FA85F&0&0001This device cannot start. B.Base System DevicePCI\VEN_1180&DEV_0592&SUBSYS_30B2103C&REV_0A\4&1753FBD&0&4BF0The drivers for this device are not installed.
I'm pretty sure you guys have seen this before; sound icon with a little x over it. I'm posting 2 pictures up to, maybe, give you guys an idea of what the issue can be.Additional information: the laptop at hand tries to install new drivers but fails everytime. No idea why. It tries to install a bluetooth driver.
I have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
i had this problem before, when i had vista. I upgraded to windows 7 x64 ultimate and i had sound. but after a few days i got the red circle with the white x. and it says no audio output device is installed. but the confusing part is. under device management. i dont see a sound, video, and game controller drop down.
I had a grand vision of grandeur. I'm planning on buying a Nokia Lumia 900 running the Windows Phone 7 on it when the phone comes out soon. Being a designer, I had to design a dock to plug in the phone to charge and sync and the idea came: what if I could use my awesome stereo and my awesome Windows 7 to make the dock into an awesome home phone?
What it would be is a mic built into the dock that is connected to the phone so when someone calls me, I don't need to pick the phone up. And if I can with the Windows Phone, I can have the audio out from the call be recognized in Windows 7 as in audio input and I can have my puter's audio output to my awesome stereo to hear the call from my speakers.
The stickler is, as is with every grand vision of grandeur, can it happen? I don't know for sure what to do to get the audio out from the phone to connect with Windows 7.
I've been searching on Google for the last three and a half hours for a solution but came up with nothing, so I thought I'd post here to see if anyone can tell me what's up. I turned on my laptop today to find that there was a little red 'x' over the audio symbol, and upon further inspection it turned out that there was no audio driver installed. I wasn't very bothered about it at first, because after a Windows update once I had to reinstall it, and everything ran smoothly from there because I just reinstalled the driver which originally came with the laptop. Now, this is the problem. I tried installing the driver, and the installation seemed to go fine, I was prompted to restart, did so, but when I logged in after the reboot, I was still getting the "No Audio Output Device Is Installed" error. I searched around, tried a different Realtek HD driver. Same result. Tried again with a different driver, no luck. Wax on, wax off. I can't figure out why it's happening, but maybe someone here can?
I only have this problem with 7, so I know it is not a hardware related issue. I simply can not get any sound out of my graphics card (seemingly) through HDMI. I have my bios setup to play audio from it. I've followed what everyone else has done when using the search, I have zero success. It worked before using 7, so I am 100% confident that this is a 7 issue (because it still works on Ubuntu!).All drivers and software is up to date too.
Recently got a USB headset, and I have speakers plugged in as well. How do I switch between the two when I want audio to only come from speakers and vice versa? I took this screenshot [url]...
I have Windows 7 32bit OS on my comp, few days ago i bought new headphones, steel series siberia v2 USB 7.1(51103), they didn't work in my computer, but they did in other pc, that I have, actually in 3 others. The problem was same as here "No Audio Output Device is Installed" but only with the USB PnP audio device, my onboard sound card worked fine. I need to disable my onboard card to enable any external card. (I think I also uninstalled drivers to my Onboard card). I did that, still didn't worked. So I enabled Onboard audio device (and installed drivers) in Bios and now I got the problem with onboard card as with headphones.
I tried to reinstall/uninstall to allow windows to find drivers, I tried a lot of different ones, don't think drivers are the case, cause its not working for any of 3 cards, even they have diffrent drivers, little chance to have 3 models with wrong drivers as newest, I tried even downloading drivers for other motherboard, because someone said it worked for them QQ. My Windows Audio service is enabled. I tried restarting Bios. Tried even plugging PCI sound card, same problem.
When I hover my mouse over the speaker icon, "no audio output device is installed" appears. I still have sound. There's a red X in along with the speaker icon. When I troubleshoot, it fails and has error 0x8000FFFF. My sound card and microphone stuff are there when I check the devices, and they work. I still can adjust volume with my keyboard, but it starts the troubleshooter when I click the speaker
I want to put speakers out on my patio, could i have 2 sets of speakers hooked up to my PC and switch which ones the music is sent to as and when? will i need anything special as in hardware or software?
I have Fujitsu-Siemens Laptop with Realtek Audio card built-in. Initially when I open the Realtek Audio Manager it shows Speakers and Digital Output as well. I have disabled the Digital Output at certain time, and now cannot find a way to enable it again.I've searched in the Control Panel, tried trouble shoot utility from the Control Panel and have got no idea how to enable Digital Output back.
product name: hp pavilion dv2500model number: dv2710uswindows 7 ulttimate 64 bitmy hp keeps telling that have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.this is not true because i have contexant (i think that's what it is called) speakers installed.ately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed
Why is there no audio output on my power dvd cyberlink? I have a collector's set of DVDs...Planet of the Apes. I have beautiful picture, but no audio. What can I do?
I have a minor issue with my laptop switching to the default speakers when it's put to sleep. It's only started doing this recently and I've made no configuration changes whatsoever. My laptop is connected to an audio receiver via HDMI which is never turned off. When I put my laptop to sleep (usually from within XBMC) the laptop no longer recognizes my receiver as an audio output and requires a log out/in to reconnect it. Like I said earlier, this has only started happening recently.
I have an HDTV connected to my computer to serve as a monitor. I used an HDMI connection so therefore I get the computer's sound through the TV. I also have a 5.1 digital surround system that I use, connected through a Optical Digital Audio Cable.
Now my problem is, I can change between the 2 devices by going into "Playback Devices" (right clock the sound icon in the bottom right corner) and then setting either audio device as the "Default Device". However I want to play audio from both of them at once, that way I don't have to switch the settings everytime I decide to use surround sound.
Is there any simple way to do this? Or do I just have to resign myself to switching in between each time?
My specs are
Asus M5A97 motherboard
Asus Radeon HD 7850 graphics card with HDMI out (this is what my TV is connected to and gets Audio through)
Realtek HD Audio (onboard), I have both regular jacks and an Optical jack, I use the optical jack for my surround sound.