How To Install Mechcommander Gold On Windows 7 64bit
Dec 11, 2012
When ever I try to install mech commander gold there's a pop up said: Unsupported 16-Bit Application.The program or feature "/??/C:/Users/Nuttawet/Desktop/MCG/setup/setup.exe" cannot start or run due to incompatibity with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available.When ever I try to install mech commander gold,
When ever I try to install mech commander gold there's a pop up said: Unsupported 16-Bit Application. The program or feature "/??/C:/Users/Nuttawet/Desktop/MCG/setup/setup.exe" cannot start or run due to incompatibity with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available.
When ever I try to install mech commander gold there's a pop up said: C:/Users/Nuttawet/Desktop/MCG/SETUP/SETUP.EXE The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
I have Windows 7 Ultimate 64-bit, and never had any problem installing 64-bit programs. Now, when a try to install any 64-bit programs it shows a message of incompatible version of the program with the running Windows, but my Windows 7 is 64 bits.
She was using a Dazzle 100 for the first couple days with no problems, then suddenly every time she would connect it, it would attempt to redownload the drivers. And when trying to use it, she would receive a "product being used by another program" error. After spending an entire day searching for a solution, I discovered that it was a common Dazle 100 problem with Windows 7, and we gave up and decided to purchase an Avermedia DVD Ezmaker Gold, which is listed on windows compatibility checklist as compatible with Windows 7 64 bit. The product arrived in the mail, and after first being connected, gave a "driver error" message.When the drivers finally installed, attempts to use the product are met with no video or audio feed by the program that came with it, and a "check to see that its working properly and not in use" and "parameter is incorrect" error on third party software. A driver check from the computer manufacturers site says all the drivers are up to date.
Please could anyone tell me how to download creatacard onto my laptop with windows 7, I'm finding it most frustrating as this is not the only programme compatible with windows 7.
Has anyone any idea on what is the difference between Windows 7 Home Premium Gold and "standard" edition? It is available from Dutch retailers, but they were unable to give me an answer. Googling forums and Microsoft web site (including Dutch one) also did not bring any results, except for more offers.
I tried to uninstall IE9 several months ago because I was told it was conflicting w/ Firefox. After I uninstalled it through control panel the folder and its contents were still on the hard drive. I manually deleted everything but the IEproxy.dll. I could not remove this because it was in use by windows explorer. Now I want to re-install IE9. The install starts but then I get the message that some files were in use by WE restart the CPU to use IE9. After restart all that is in the IE folder is the EIproxy.dll and a folder called SignUp. In that folder is a couple of Icons and nothing else. I have tried installing in safe mode. I can not do a restore because I have no idea when the first change was made and I have installed far to many programs to turn back now. I have tried FixIt which does not help. Is there a way to disable the IEproxy so that the IE install can proceed.
I set up the raid and everything bios related but windows 7 (64-bit) cant detect the hard drives even after i got the most recent drivers from gigabyte's website?
I am trying to install Sabrina, the Teenage Witch: Spellbound on my 64bit Home Premium copy of Windows 7. The launcher runs when I put the disc in, but when I click install I get the following message: The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.I've tried running the game in Windows 98 Compatibility Mode and as Administrator but with no results!
I have Windows 7 32bit with an upgrade disc (so it only has the 32bit on it) and I would like to put 64bit on. I don't care about my data or programs (they are backed up) but I am wondering where I could get iso images and whether my product key will work.
I tried this the other day thinking that since it was 10.1 it would fly, well it didn't. It took forever and then refused to go any further so I cancelled the install.Should I have used " Run as Admin" on this one? or what?
when i'm running the setup.exe, error message pops up "The version of this file is not compatible with the version of Windows you're running. Check. an x86 or x64 version.
I have been trying to get windows 7 Ultimate 64 bit installed onto a raid I created with two ocz agility 3 ssds. Everytime I try loading the drivers at install it gives me an error stating the drivers are unsigned and to install a 32 bit OS. When installing a 32 but OS, the install works normal and the computer runs fine. I am just wondering why it wont install for 64 bit considering I would much rather run 64 bit. I went to both the MoBo's website and the main companys website for the chipset drivers (AMD) but have both turned up with the same error.
I bought a new Desktop PC and it has the win 7 30 day trial.I need to install my Win 7 ultimate 64bit to my PC, deleting the 30 day trial. ( I need to know how to start the setup when the PC is booting up, most importantly)
I just can't get the OS installed. I can install 32 bit, but I can't even load a 64 bit DVD. I get the error 0xc0000225, and it says it may be a hardware issue. Then it just keeps boot looping. Also, I can only install 32 bit windows with IOAPIC off.
Here are the parts for my system: MSI 760GM-P34(FX) AM3+ AMD 760G Micro ATX AMD Motherboard AMD Phenom II X4 965 Black Edition Deneb 3.4GHz Socket AM3 125W Quad-Core Processor HDZ965FBGMBOX CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9R GIGABYTE GV-R667D3-1GI Radeon HD 6670 1GB 128-bit DDR3 PCI Express 2.1 x16 HDCP Ready Video Card Western Digital WD Blue WD5000AAKX 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
I have been Googling this issue for the past three days with no luck. I only have one stick of RAM inserted. I have taken out the graphics card. So I only have the essential parts installed.
I am attemtpting to install the win 64bit 7 RC on a brand new build. I am using a USB stick as my install media. The install boots, although it takes a VERY long time to get from when windows begins to load the setup files to the place where I have issues (about 15 - 20 minutes). Where the install crashes, is instantly after I choose "custom Install" and kicks back a 0xE000100 error, which is a general media error code.If I use the exact same USB thumbdrive on my 2+ year old Dell Optiplex 320 (which is a piece) not only does it get past the error point, but it gets there in about 2-5 minutes versus 15-20. It looks like the issue above crashed in the step directly before choosing the install partition - It never gets to the point were I can choose what drive or partition I want to use, but on the optiplex it does, and this is right after clicking "custom install" were my new unit crashes.
My Specs: ASUS M4A79T Deluxe with Newest BIOS flashed ATI Phenom II x4 955 Deneb 3.2 AM3 Black Box Edition MSI R4890-T2D1G OC Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 OZC Gold DDR3 1600 Dual Channel 2GBx2 250 GB Western Digital SATA HDD 40GB Samsung SATA HDDx2 80 GB Western Digital SATA HDD
Here is the story. I was running windows 7 ultimate 32 bit version. I decided to install the 64 bit version so i formated my c drive and installed the 64 bit version. All well and good except now i cannot access my d drive. I get a message "access denied". When i was using the 32 bit version i had my d drive permissions set up so that only I, as the administrator could access it and the kids login couldnt. I have gone into the drives properties and made myself the owner but still cannot access it. Also i notice that when looking at the properties it says that the drive it no free space left on it when it actually has about 300 GB left.I have gone into properties and made myself the owner of the drive but the problem is still occuringI have been told the problem is that the permission on the drive were made on the 32 bit install and I and now i am trying to change them in a 64 bit version
Memory has been testing using program from [URL].I'm trying to install Windows 7 64-bit.I built another machine with the same motherboard, processor and RAM which works fine. The differences being between the two machines the Harddisks and Graphics card.On the machine I�m having problems with I have two Seagate ST32000542AS 2TB setup as RAID harddisks and a Gigabyte graphics card.Windows 7 installs but after the first boot from the HDD it displays "Starting Windows" and then resets or displays the blue crash screen. I tried running in safe mode list drivers as it is booting. After disk.sys is loaded the computer freezes.I�ve tried using the latest AMD RAID drivers from the gigabyte website for this motherboard during the installation, but now I�m starting to think this maybe a graphics card driver problem � are there any known issues with the Gigabyte graphics card I�m using and Windows 7?Is there a way of loading the Graphics card driver automatically.
I just formatted my computer and after completion of my install of Windows 7 I noticed that it installed the 32-bit version, yet for the last year it has been running the 64-bit version!! I have no idea why it won't let me install the 64-bit version, I even tried another fresh install of Windows 7 but I got the same result. Thinking it was hardware, I ran the Windows Experience Index and then clicked "View details etc.." and it indeed did say that my system IS 64-bit capable!What am I doing wrong?? Or what am I not doing in order to reach the [COLOR=blue !important][COLOR=blue !important]64-bit[/COLOR][/COLOR] install threshold?
Component Details Subscore Base score Processor [COLOR=blue !important][COLOR=blue !important]Intel[/COLOR][/COLOR](R) Core(TM)2 CPU 6600 @ 2.40GHz 6.4 5.5 Determined by lowest subscore Memory (RAM) 2.00 GB ---->> 5.5 Graphics NVIDIA GeForce 8800 GTS (Microsoft Corporation - WDDM v1.1) ---->> 6.7 Gaming graphics 1023 MB Total available graphics memory ---->> 6.7
I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD: 1. Running only windows update, no drivers or any other software installed. 2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials) 3. Booted in Safe Mode with network connection.
Spec: Asus P8Z-77-V-Pro HDD 500GB Segate baracuda SSD 60GB Corsair Force 3 (windows is installed here) 8GB RAM Corsair vengeance Nvidia GTX560 ti TOP factory overclocked Intel i5 2400s 3,7Ghz
I am having a problem. The OS(Windows 7 x64) finishes installing but when it finishes it boots up again like normal then flashes a quick blue screen error message. I have tried doing what the comments told you to do except for downloading the ISO and burning it to a disk. I just get the same error. I have researched this processor and it turns out it has been known to be VERY dodgy with Windows 7 64-bit.