High End Workstation Doesn't Work When Install Windows 7 64bit
May 11, 2011
I have the following workstation configuration :
PROCESSOR - Dual (two processors) - Xeon E5520 8M Cache, 2.26 GHz, 5.86 GT/s Intel� QPI
MOTHERBOARD - Intel Workstation board S5520 SC
GRAPHICS CARD - Palit Nvidia GeForce GTX 275 (986 MB) Dual DVI out
RAM - DDR3 1333 MHz 6 GB (G-Skill)
MONITORS - 2 are connected (Samsung Sync Master 2233 & NEC Accusync LCD 224WXM)
CURRENT OPERATING SYSTEM - Windows XP 64 bit
The problem with the above configuration is that when I try to install Windows 7, the machine freezes (hangs) randomly, I have tried formatting and installing for at-least 4-5 times now but what happens is the setup doesn't work and stops during installation, last time the setup was successful but it hangs the workstation without any reason. I have also tried installing the same CD on other system and it works fine.
Just bought a new laptop. Old one died. I can't run my old One Write Plus Accounting software. Error says it doesn't run with 64 bit o/s. I bought a copy of windows 7 professional because it has an XP Emulation mode but if this accounting software won't work in either case, I'd hate to even open the package and blow $200
I've just recently purchased a generic wireless mouse from eBay. more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work. I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything. moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine. I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
I have a problem with my custom build pc,When i try installing windows 7 pro 64 bit, It freeze in "windows is loading files", I've waited 20mins and nothing happens.Before this problem happen I bought a Barebone kit and not a problem like this happen but I recently had hardware issues with my motherboard and psu were not stable, I had to replace both my mobo and psu.here's my original build I started with - no problem what's so ever[CODE]
I have a Compaq f500 that was running Vista home premium. I did a fresh install of Windows 7 ultimate. It went thru the install with no problems. When it got to the screen when you put in your name I discovered that the keyboard doesnt work. I tried plugging in an external keyboard and it doesn't work either. Also cant select safemode or anything that requires use of the keyboard to enter.
I have Windows 7 Professional x64 and autoplay is set to play using Windows Media Player but DVD's, and CD's spin but nothing comes up on the screen or audio.
Smallish yet irritating problem with my Win 7 Ultimate 64-bit install - Autoplay doesn't work, and hasn't since I was forced to reinstall a couple of weeks back.Doesn't work for discs inserted, USB flash drives, memory cards, external HDDs plugged in etc (Firewire & ExpressCard/34 not tested). I have of course gone to the Autoplay settings and restored defaults, also tried setting every category (DVD, CD, etc) at "Ask me every time". No luck. I was working fine on the same OS before before I had to reinstall fresh, also on x86 version of Win 7, and on Vista.Nothing wrong with the USB ports/disc drive, inserted media is still detected.
A problem arised with Windows Installer-package. A DLL-file that is needed to finish this installation couldn't be run. Contact supportstaff or your supplier of this package. That is what my computer says when I am trying to install Java. Why do I have to install a DLL-file? I haven't had to done that before when installing Java.Other programs has also told me to download a special DLL-file, but Java doesn't tell me which one, so I can't download it
tested scores. processor 7.2 mem ram 7.4 graphics 5.0 gaming graphics 5.0 primary hard disk 5.5 taskmangager way slow cpu .. when running 2-3 apps which i need for my job. have 45 gb of reed disk space .trade stocks so closing an application.
I just got a huge itch to play the Age of Empires series again. I played Age of Mythology last week and worked without a hitch on Windows 7. But when trying to install my all time favorite Age of Empires 2 yesterday, ran into a lot of problems - after hours of googling, I have managed to get the game up and running without the dreaded colour bug and that too at my monitor's resolution of 1680x1050 (vanilla AoE 2 and AoE 2x are limited to 1280x1024) and I managed to get the game to play background music again (more on this below).
So I am compiling a guide so that anyone who wants to install this classic can spare themselves the agony of spending hours to find a solution. The following guide has been compiled using my Age of Empires Collector's edition which I bought some 9 years ago. I can't guarantee this guide will work 100% for other editions/compilations of the game - but I see no reason why it won't work A. Installing Age of Empires II - The Age of Kings When I tried to install AoE 2, it would keep getting stuck at 50% when copying the file ARIALNB.TTF - so I had to use the following steps to get it to work
1. Insert your Age of Empires II disc. DO NOT run the setup through autoplay. Close autoplay, go to My Computer, right click the AoE 2 CD and Open it.
2. Now right click AOESETUP.EXE and click properties and go to the Compatibility tab
3. In compatibility mode, Select Run this program in compatibility mode for: and in the Drop down menu, select Windows 98 / Windows ME
In Settings, select the following options:
Disable visual themes Disable desktop composition
In Privilege level, select Run this program as administrator Click apply and then click OK
4. Now, run AOESETUP.EXE as administrator and the setup should complete without a hitch B. Installing Age of Empires II - The Conquerors Expansion
The conquerors setup went smoothly for me - did not need to set it to compatibility mode. If you run into problems, I suggest you use the above method. C. Updating the game and Installing the resolution patch
note: the resolution patch will only work for The Conquerors Expansion and not for the vanilla Age of Kings
1. You can get the 1.0c patch from Microsoft Games. Install it.
2. Now get the resolution patch made by boekabart of [URL] - download the AoE2WideSetup.msi installer
3. Get a No-CD exe for the conquerors expansion -the widescreen patch only works for No-CD exe, spent around an hour trying to get the widescreen patch to work only to find in the readme that it wont work with the original executable because its encrypted or something
4. The readme for the widescreen patch says that it only works when it's installed to the game folder of Age of Empires 2 so when installing the patch, keep that in mind. My installation path for the patch was: J:GamesMicrosoft GamesAge of Empires IIAoE2Wide
5. After installing the patch, you should get a shortcut on your desktop named AoE2Wide. Run it. After it finishes running you should get a .bat file on your desktop named "AoC1.0c 1680x1050.bat" or something.
6. Right click on the .bat file and go to the compatibility tab and select Run this program in compatibility mode for: and in the Drop down menu, select Windows XP (Service Pack 2) and click OK.
7. Now run the .bat file as administrator and keep your fingers crossed!! In game menu, make sure to select 1280x1024 as resolution. If all goes well, the game should be running at your desktop/monitor resolution and the colours bug should vanish. Enjoy! D. About the Music Bug and Fixing it
This has plagued AoE 2 for a long time now. The Age of Kings and The Conquerors CDs are mixed mode CDs i.e. one part holds the game data and the other part holds the game's BGM in Red Book Audio CD format. Now, old computers (1999-2000's) had no problems with this as they had an audio connector for the CD drive (more info here) and AoE would play the audio track off the CD once you start the game. But since now we use SATA drives, the game wont play BGM anymore.
This always puzzled me as when I got the game I had a Win 98 Pentium 2 PC with a Philips CD drive which had an audio connector and the BGM would play correctly- but when I got my Pentium 4 machine with a Samsung DVD drive with no audio connector, AoE 2 would not play music anymore and it takes a lot out of the game as the music plays a big part in setting the mood of the game.I used to get around this by starting a game in AoE, alt+tab back to windows and then playing the Game CD in Windows Media Player and then alt+tab back into the game.When using the above widescreen patch, my system hangs for a bit when alt tabbing back to windows (I guess it's because the patch suspends explorer.exe in order to prevent the colour bug). So after more searching on google and experimenting, I found another method here developed by TheMegaX2 and FrozenWolf150 Quote:
1. Use Windows Media Player to rip the soundtracks from the game CD's. I did this with both the AOK and AOC soundtracks. WMP will usually create .wma files.
2. Rename them to something recognizable, like AOK Track.wma, since the default name for both is 01 Track 1.wma.
3. Use a free audio converter, to convert them to .mp3 format.
4. Copy them to the Taunt folder.
5. Assign them numbers like you would for custom taunt files. I named them 50 AOK Track.mp3, and 51 AOC Track.mp3.
6. When you start the game, now you can choose between the AOK and AOC soundtracks, based which you prefer. Just press enter and type 50 for Age of kings BGM, and 51 for The Conquerors BGM and press enter again.
Does anyone know where to download a pinnacle highspeed device driver for 64 bit computer running windows7. I need this for the moviebox de luxe box interface with studio 12.
I have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
I had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner OS Version: Microsoft Windows 7 Home Premium , 64 bit Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 2 RAM: 1844 Mb Graphics Card: Intel(R) HD Graphics, 730 Mb Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB; Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071 Antivirus: avast! Antivirus, Updated and Enabled
I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
I connect some XP (Pro, 32 bit) Clients using a bat file to our NAS (Still using workgroups, no server)The command in the bat file is like this
net use \NAS01 /user:Admin Password net use \10.70.1.10 /user:Admin Password or net use \NAS01 /user:coputernameAdmin Password net use \10.70.1.10 /user:coputernameAdmin Password
This is working with all my XP clients pretty fine. No I want to do the same with a Windows 7(Pro, 32 bit) Client .The exact same command occurs this error message: System error 1326 has occurred.Logon failure: unknown user name or bad password.(Username and password are correct, working on all XP clients)is that when I am using a non existing user name and any password, i says: The command completed successfully.
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
I have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
i am on windows 7 and for a week, my keyboard doesn't work. the key p, return, tab, and some others won't work. ma visual keyboard works fine - except the question mark - . i tried the pilots, and the computer says it has the best pilots so no need to update. i don't know where it comes from, but then, after a windows update, my keyboard came back to normal. it worked fine for three days and then, again, it screw up. it's always the same keys that don't work, so i don't think my keyboard is worn out. my computer is only one year old. it's a sony vaio laptop. each time i press the p key, for example, the start button -physical one- blinks. same for the other buttons. when i press the return key, the start button blinks. and while i am having this problem, my computer has trouble loading. sometimes it freezes and i have to unplug it and remove the battery to reboot.
my LENOVO 450 the window start up do not want to run, when i open it, there the note saying if I want to open my computer in normal way or use to window start up repair
Some weeks ago, a pop-up message appeared on my aging father's PC screen, saying that Microsoft apologized, but something must be done and required that he click on some button.Since then, his login password is inefficient. He can't use this PC anymore.
I just installed Windows 7 on my home computer. When I plug in my old speakers (Creative Intrigue 2.1s) whatever speaker is plugged into the right jack BARELY gets any sound. I did some research and it seems this is a semi common problem. I tried messing with all the balance levels and hooked up an old set of speakers which work fine. I also tried switching speakers and whichever is in the right audio jack barely works while the other works fine.The only other thing I was able to find was someone said they got a "new" cord and it fixed their problem. Is there a cord that would work with Windows Vista but wouldnt work with Windows 7?
Just got this computer about two weeks ago. My old XP Pro finally crashed and burned. I miss that machine. Win 7 is crap as far as I am concerned. Problem - Windows Explorer absolutely does not work. I try to copy and paste between drives or even on the same drive. Program starts out great and gets down to near the end and reads 5 seconds remaining. That is the end of the copy and paste. Furthermore, it is an ordeal to shut the damn program off. Sometimes I even have to pull the plug on the machine (and yes I know that is not good). I thought for a bit that some throttling program was the culprit but I am getting nowhere.
my keyboard works fine for the BIOS but as soon as windows starts it stops.It's not recognized in the device manager but will occasionally show (still doesn't work). And I know it's not a USB problem because I've switched ports and all other USB devices work, including the mouse.
I have a new build with Windows 7 64 bit. I am trying to install Java. I have downloaded it and tried to load it. I get to the installing Java screen and nothing happens.
I have a Win7 64 bit build that I've ran into connectivity problems with. I can get on some websites, cannot get onto others. Can get to the home page on some, but no further such as here, I can get to the main forum page, but then I cannot get into threads. Some sites, such as newegg, can't even get onto them. So far I've tried different browsers, including downgrading from FF4 to a FF3 version. IE8, Chrome, same issues. I have reason to believe that it's within the PC itself, whether it's software or hardware. I'm on my netbook right now running FF4 and don't have the same problems. I've even shut off the firewall and there is no other firewall or anti-virus on the PC.
