I have a laptop that has the HP simplepass installed. Its pretty good, but everytime I enter a website with a login, a popup with the fingerprint icon popups in the top left corner of the screen. I think its annoying because i do not want that pop up coming if it blocks the back button. Furthermore, i do not have an account with all the websites that i go to. al/Temp/moz-screenshot.png[/IMG]I want to still be able to use the function while entering websites, but i do not want it to pop up everytime.
My job involves juggling six different pieces of internal software and attention to detail. It's easy to forget that I need to check my email for customer messages each half hour (or thereabouts). The company wants me to use gmail so I can't configure incoming messages to make a sound. Even if I could, it would be better just to do a scheduled check.
Cnet has a ton of reminders and clocks; too many to sort through. Anyone have a suggestion for something that will make a simple sound and pop up a message box on top of whatever I'm doing? I use Windows 7 Professional 64bit
I can click on an icon in the system tray, and the pop-up appears correctly (for example, clicking on the volume icon, the volume control appears). However, as soon as I move the mouse pointer towards the pop-up, the pop-up vanishes.
I just purchased a brand new Windows 7 Home Premium 64 bit Desktop Computer. I replaced it with my old Windows XP IE8 and used Hotmail as my email client which I still want to use on my new Windows 7 Computer. However; when I click on the read mail icon in IE8, on my new Windows 7 PC, I get a popup error message saying "Cannot perform operation because the Default Mail Client is not properly installed."
I want to change the desktop icon for a website. However, when I right click and select properties and then click on change icon,there are only three (3) choices. How do I get more choices? On my old vista computer there seemed to be about a hundred choices.
For regular coax cables, like used for TV antenna, there are short cable sections that are thin and flat, to permit the cable to fit under closed windows or doors.I'm wondering if anything like that is available for ethernet cables?
my computer and gateway monitor normally run at 1920x1080. Today when i turned on my pc, my resolution was set to 800x600 and it WILL NOT go past 1400x1050 and there is no option to go past it. Also, when i go to control panel and screen resolution, the display only says (Default Monitor) ON, when normally it says Gateway or something like that.
I am facing the following interesting situation.[CODE]I was able to set up a hyperlink without any command line arguments for one cell, but then I had to set the value explicitly in the batch file as follows - Code: cd "%~dp0"notepad++sourcefile.txt -n3150 So this batch file opens the "sourcefile.txt" at line number 3150 in the Notepad++ editor. However, it's not practical to write a separate batch file for every such line number in the excel sheet. So I am wondering if it is possible to somehow pass the line number as an argument to the batch program.
Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake
[code]...
Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.
My system pass POST flashes the Windows scroll across the bottom and then stops loading. Waits exactly +/- 8 Min, then finishes loading. Tried everything.
c\windows\system32\hkcmd.exe pops up after every login and says "make sure you typed the name correctly and then try again."How do I remove it. How specifically do I remove it in the registry or where?
i have a fresh installed os windows 7 ultimate 64 bit. And everytime i open a browser cmd keeps on popping up with but instantly closes..
i have already did a Full System Scan with my Antivirus kaspersky 2012, Did a Full System Scan using MalwareByte's Anti-Malware, Did a Full System Scan using SuperAntiSpyware found some infected files but still the cmd popup thingy is still there heres a copy of my hijackthis log file..
I have just started using a new Windows 7 laptop. In Windows Live Mail Version 2011 (15.4.3538.513), when a new mail is downloaded from the IMAP server, there is no sound or popup notification. I think that all necessary sound / notification settings are properly checked in Windows Live Mail > Mail > Options. My sound is ok. I even get a windows default sound, when some error is notified in Windows Live Mail. I have been using OE (under XP) and WinMail (under Vista), and this problem does not happen there.
I have a new eMachines running Windows 7. On each startup a popup appears asking if WkUFind.exe should make changes to the computer. either newly installed 3rd party software or Microsoft Picture It program. I don't believe Picture It is installed.
I've found WkUFind in a Program Files folder. Trying to eliminate this pop.
I've just reinstalled my Windows 7 (purely for speed), but while my previous installation of Real Player had no problem downloading live streams for recording, I'm stuck this time around to figure out how to get past a new error msg.I go to File/Open & put in the stream name - this particular one is shown in the msg below. When I try to connect I immediately get a popup box with this msgI've tried it with 3 different versions of Real Player but get the identical msg every time,s not necessarily the Player's settings.I have a Belkin Play router & am using Microsoft SE as my antivirus program and use both Firefox & IE9 as browsers.I've no understanding of UDP/TCP & ports etc & really don't want to start meddling with them until I know that's what I really have to do, & also get specific instructions etc.
Ok, there is a program that I use a lot, and I am wondering if it is possible to turn off that annoying UAC popup window that comes up every time I open it.
currently running Windows 7 64-bit, and have had no troubles with my internet in some time. Finally went ahead and set up security on my Linksys router today, but immediately after my PC could no longer connect to the network.There are two laptops, a desktop, a Playstation 3, and two smart phones that all have no troubles with accessing the network now, but this specific desktop continues to show limited access, despite having full bars.
I recently replaced the hard drive on my Dell PC. I followe the Seagate instructions to copy the entire hard-drive, including the Operating System. The instructions didn't say anything about activation or "genuine windows" issues. In any case, my Windows 7 installation is "activated", but does not pass Microsofts "Genuine" tests. Updating is disabled. I really don't want to reinstall Windows 7. Is there a way to get my "Genuine" status back?
lately on startup the User Account Control window appears and it asks: Do you want to allow the following program from an unknown publisher to make changes to this computer?
Program name: ISUSPM.exe Publisher : Unknown File origin : Hard drive on this computer Program location : "C:ProgramFiles(x86)CommonFilesInstallshieldUpdateServiceISUSPM.ex e" - Startup
I went too this location on my computer and this program is installed but lately on startup it asks me do i want too click on yes or no too allow this program too make changes to my computer..why is it doing this now when it didnt before and what do i do? Ive clicked on both yes and no lately and it still is appearing on my startup.
I installed Windows 7 a few months ago. I started having problems soon after. So I reinstalled Win 7, Friday. The same problems continued. One that my son found was when we installed Spy Sweeper. That made it impossible to switch between users, so we uninstalled it. The other major problem has been the Developer's Tools window that pops up when I try to type any reply or information into any program on the internet. I can't get rid of it by hitting the X. After about an hour on the computer, that stops. Does anyone have an idea on what could cause this?