For regular coax cables, like used for TV antenna, there are short cable sections that are thin and flat, to permit the cable to fit under closed windows or doors.I'm wondering if anything like that is available for ethernet cables?
View 7 RepliesWhich of the cables is the ethernet cable please.I'm trying to transfer my documents into my new laptop.
View 4 Replies View RelatedOne of my Windows 7 computer has been getting an error for 24 hours that the ethernet cable is not detected and it can not connect to the internet. Other Windows 7 computers on the same router/internet connection work fine.I have already tried the following all of which were not successful.
-Plug in a different cable.
-Reboot the computer.
-Disable and then re-enable the connection.
-Restore to a previous system point.
-Inspect the connector for a problem with the pins.
-Look at the device manager for problems.
-Work through the windows troubleshooter.
The device is described as a Broadcom Netlink Gigabit Ethernet, although it does not appear to be a separate card and looks to be built into the motherboard. The Motherboard is Alienware 04VFW2 version A02.
I recently reinstalled windows and on a new hard drive and now it says my ethernet controller needs to be update. Without it i cannot use the internet without connecting to wifi, how do i update it?
View 1 Replies View Relatedfrom wher can i download hp ethernet cable driver??
View 2 Replies View RelatedI have a Toshiba with Windows 7 and I was able to connect to my internet wirelessly and then I went through my computer deleting many things and now i can't connect to my router without an ethernet cable.
View 4 Replies View Relatedcan you get me Ethernet driver for hp windows 7.
View 4 Replies View RelatedI have BT Infinity with the BT Hub 3.About 5 days ago my Telephone and Infinity stopped working due to a fault on the line. In order to be able use the internet i logged on to one BT's Wifi Hotspots which altered some settings so that I could connect. The faulty line has now been fixed.My problem is that I can no longer get my Desk Top to connect to the hub,despite turning off wireless it still connects wirelessly to my hub.
View 5 Replies View RelatedMy windows home server has decided to stop communicating with the client machines.The connector software won't connect (reinstalling makes no difference), remote desktop times out, manually shutting down (by pressing the power button) and restarting also fails to correct the problem.I can ping the server (average response time 3ms)The Home Server machine is headless and although there is a connector the only monitor I have doesn't fit the connector.I susoect that the internal battery may have gone flat and may be the servers clock is out of sync with the client machine (but even when the server is asleep its still connected to the mains).
Someone has said that I can connect a laptop to the sever via an ethernet cable but the only instructions I can find say that I have to set the IP address on both machines to be the same - Is this correct or is there another way of connecting?
Windows 7 x64 pro? the original installed OS on the system? OEM = came pre-installed on system, What is the age of system (hardware)? 2.5 yrs What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
View 1 Replies View Relatedanyway to use an ethernet cable to directly connect my printer to my computer or is there no such thing?
I have an older printer which has no USB connection. My new computer also does not have the old style printer port which is required for this printer.
My printer does however have an ethernet port and I was wondering if there is anyway to connect directly to my computer using an ethernet cable.
I realise I can connect my printer to my router but this sits on the otherside of my house and it is not practical for me to have my printer so far from my computer.
I am using a Dell Studio 1557 model. I downloaded the Windows Live Essentials update yesterday and it prompted me to restart my laptop. I meant to click "Postpone" but I clicked "Restart" accidentally. This was in the middle of while I was running Firefox and running Winamp (as far as I can remember).So when the computer was back on I noticed I totally lost the internet connection. Even though the CAT5 cable is connected, the laptop does not recognize it at all. It simply says "Not Connected". And just today I realized that whenever the Ethernet cable is connected to the computer the computer periodically(every other second or so)makes a faint buzzing noise. This is something I had not noticed before. I replaced the cable with a new one and the same thing still happens.I think the modem is working fine since my roommate can access the internet. On the modem where the lights should be on for my connection, it is periodically blinking.
View 9 Replies View RelatedI own a toshiba satellite C655-S5061 with win7x64 sp1 ultimate installed on it. My internet (wired) connection used to work fine until yesterday. Troubleshooter says "an ethernet cable is not properly plugged in or might be broken", Tried a repair install, updated drivers, reinstalled drivers but of no avail. The ethernet cable when connected to other laptop works fine.
View 2 Replies View Relatedi want to transfer files, remote desktop, lan gaming....actualy lan gaming works fine without doing anything just connecting the cablebut how do i transfer files and remote desktop....what software do i need???
View 2 Replies View Relatedhow to transfer data pc to pc?
View 9 Replies View Relatedtransfer files from pc using windows 7 to pc using xp
View 4 Replies View Relatedwhat software i need to connect my laptop through ethernet cable
View 1 Replies View RelatedMy girlfriends parents have bought a new compaq laptop with windows 7. Connected up to the internet by cable & wireless no problem. Yesterday couldn't do either and found it nearly impossible to get into the routers settings to check them. Kept saying limited access. I've tried various things to no avail. Then I noticed that my iphone could connect to the router, so I ruled out a router problem. I brought the laptop home and it wouldn't connect to our router, so I'm presuming it's a settings problem. But now I'm stuck!
View 14 Replies View RelatedRecently, I upgraded the houses' internet to fiber (or so its called in Chinese, living abroad in Shanghai BTW)and the within the first day of upgrading, I've seen a tremendous increase in internet speeds. However, within a day, a new problem also came up.Whenever I plug the ethernet cable into its port at the back of my PC, all the open programs suddenly stop responding, and then my PC freezes. I've tried booting up without the ethernet cable plugged in, and everything works perfectly. Yet the second I plug in the ethernet, everything stops working. The conditions are as follows: -I am unable to CTRL - ALT - DELETE to bring up task manager.- The mouse cursor is still moveable, but nothing can be clicked or selected-The cursor turns into the spinning loading circle, but never finishes whatever it's trying to do.I am forced to manually power down (hold the power button or unplug) the PC.However, rebooting in Safe Mode with Networking yields no problems. The internet connects just fine, and there is no freezing/lagging going on at all. I'm currently posting this from Safe mode w/ Networking. The conditions are pretty much the same when I plug in the ethernet cable to my Macbook. Chrome, or whatever I'm using simply stops responding, and I get the spinning rainbow pinwheel of doom. Forced to manually power off. This has also occurred to a friends' Macbook when he plugged in the Ethernet in an adjacent room.
View 3 Replies View RelatedI have a LaserJetprinter with a bad USB port, and I want to connect it directly to my laptop using the ethernet port. Since there is no internet at this location, I have been using the USB port.If I connect the printer directly to my laptop what type of cable do I use (crossover?) and what kind of port settings do I use (TCP/IP?) and how do I set this up correctly?
View 4 Replies View RelatedMy laptop won't work with the Ethernet cable and say it has an IP conflict. All my computers have an IP address starting with 192 and the laptop has an IP address starting with 169. I did an ipconfig and on ipv4 is where I got the IP addresses. I tried to do an ipconfig / release but it won't release the IP address because of the wireless media.
View 2 Replies View RelatedI'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection. That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network
I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.
(Pc runs windows 7 32 bit and laptop win 7 64bit)
i have tried transfering files through windows easy transfer but after transferring files it screws up my desktop like changing desktop backgroud, themes, setting and many more
View 4 Replies View RelatedI have just installed Windows 7 Ultimate on my laptop and now find that I can no longer sync (I'm using Syncback SE) over a patch cable between ethernet ports. I had previously been doing this quite effectively on Windows XP and my procedure was.
1. Both computers were in the same workgroup and accessed the same wireless network (secure).
2. Ethernet patch cable - usually showed up in the lower right corner as having 'limited or no access'.
3. Shared my user folder on the laptop (after disabling wireless for security - but this worked whether wireless was disabled or not)
4. Ran Syncback SE ver 4.1.3.0. and synced my files between the laptop and desktop.
Then I bought Win7U for the desktop, and the same procedure as above worked fine between Win7U-desktop and WinXP-laptop.
Then I bought Win7U for the laptop, and what happened next was odd :
1. It worked like a dream - really fast transfers etc, scanning very fast. I think that at this time I had somehow managed to put both in the homegroup but they were communicating over the ethernet.
2. As the sync was taking place I launched ITunes and synced my iPhone. It may be coincidence, but the ethernet cable connection was lost at that point.
3. Now I cannot re-establish the ethernet connection.
What is the correct procedure for achieving what I'm trying to do above ? Why does HomeGroup insist on using my wireless connection instead of using the ethernet cable direct connection ?
<whine on> In my close to 20 years of using Microsoft Windows, why haven't they managed to make two Windows PCs recognise each other and share files quickly and simply, like you can with that other OS.....<whine off>
For the past half a year I have had my PC, I've always had some problems with my internet connection and Windows 7. I've always thought that it's a case of bad hardware and such but it's starting to look like it's Win7 that's giving me the finger.I've mainly been using a WLAN USB-interface and from the very beginning problems have been occurring. At first, the connection would be really unstable. It might stay up for 2 minutes or for a week. Rather annoying. I tracked down the problem and thought I had found a solution. Apple's Time Capsule has also a WLAN feature and it was Time Capsule's network I was using. I found out that Windows 7 and Time Capsule weren't all that compatible so I had to find another solution. Luckily enough, there's another WLAN in our household. It's much farther away than the other so I was afraid I might have some connection issues. And I did. The signal was weak at times and I just couldn't establish a connection. So, I moved my PC to another room and it started working properly. The distance from the router was cut down from maybe 8 meters to 2 meters or so.However, I couldn't keep my PC in that room forever and it seemed odd that when I moved the PC a few meters away from the router, the signal disappeared. So, that in mind, I went and took the USB-interface to the place I bought it from. I figured it was the interface because all the other of my devices connected to the Internet worked fine. The room is no Faraday cage. They still have the interface and I didn't get a replacement for the time being so I had to connect the PC to the Internet with a cable. At first, the MOBO wouldn't recognize the network. Then I rebooted and replugged all the cables and the ethernet LEDs started blinking. I was happy - I even checked that the lights indicated that there was data activity and that there was a 100 Mbps connection. But still - I oouldn't connect to the Internet. Windows 7 would only say that there're no connections available. I started realizing that it might be Win7. So I booted the PC up with Ubuntu since I have it on dual-boot and surprise, surprise - the Internet connection works perfectly. And here I am writing this post. The cable connection has worked with this PC before and it works now with other PCs, too.
View 5 Replies View RelatedEthernet cable err message thinks not plugged, tried everything...even went to store and got external ethernet adapter, nothing. Checked BIOS settings, etc. Tried restore to 30 days ago, tried reinstalling ethernet drivers. Tried different cables, different slots, you name it--I've tried. Finally did a restore to factory default and still Local Area Connection still doesn't connect, thinks not plugged. Did some reading, discovered the CMOS battery dead, replaced it with a new one. Was able to connect to internet, do download, reboot, get on iternet maybe an hour and then, AGAIN, back to the error message cannot connect, cable not plugged..
View 1 Replies View RelatedI have an annoying problem with my pc running Windows 7 Ultimate.Till I connected my pc(which is a desktop without wi fi adapter) to internet using a ethernet cable and a wi fi router I had no problems. After that, randomly, but especially when browsing the internet, the computer freezes and I must restart it.I have to mention the fact that if I connect my pc to internet using directly the cable from my ISP ( a pppoe dial-up connection) everything works fine.
View 3 Replies View RelatedI have internet sharing on my mac turned on, so trying to get the PC to read the laptop as an access point via said cable. I know this has been done on XP, but I'm having issues with Windows.
View 1 Replies View RelatedI just installed a new copy of win 7. My computer doesn't recognize my printer or ethernet cable. What drivers do I need? Any special order?
View 6 Replies View RelatedConnect pc to laptop using ethernet cable 7 wants to scan laptops
View 2 Replies View RelatedI just loaded a new copy of windows 7 home 64. Now my computer doesn't recognize my printer or Ethernet cable.
View 6 Replies View Related