HP Pavilion 15 In 1 Reader
I did a clean install on my new HP pavillion model a6632f, everything works other than I can't get the 15 in 1 reader to show up. There are no unknown devices in device manager.
Any ideas?
View Replies (Posted: 03-28-2009)
Sponsored Links:
Related Forum Messages for Windows 7:
HP Pavilion M9500Y Card Reader Problem
Just to Start out with here are the System Specs then I will get the the question. HP Pavilion M9500Y AMD 9750 Quad Cor 2.4 GHZ 8 Gig DDR2 MEM Invidia 9500S 512Meg DDR2 3 TB HD disk Space DVD Burner LG Blue Ray Burner Hauppauge 1250 Hi-Def Turner 15 in 1 4 slot card reader HPw2408h Monitor Win 7 Ultimate 64 bit RC1 Now to the fun part I have been using the rc1 windows since it came out and started with the Beta before that . Up to now I have had no problems with things being recognized. but the other day I rebooted the system. Much to my surprise the Card reader didn't show up when i opened the my computer Icon. When I stuck in a card figuring maybe it just didn't reqister nothing happened so I looked in the device Mgr and low and behold it shows up that with no problems. Tried uninstalling and reinstalling the drivers and though they reinstalled with no problems the divice still only shows in the Device mgr and is not accessable anywhere else any thoughts would be helpful.
Posted: Saturday, August 08, 2009 9:44 PM
View 3 Replies!
View Related
Cf Reader Drivers
trying to load my jessops compact flash reader driver onto pc had reader a few years and get this error. StlTrk2k.sys General file transfer error . Please check your teget location and try again.
Posted: 4 Weeks Ago
View 0 Replies!
View Related
HP Nw8000 SD Card Reader
I'm running Windows 7 RC on HP nw8000 and I'm pretty sure the card reader worked ok on Vista Ultimate 32. Has anyone found a driver for the built-in SD card reader? HP doesn't list anything past XP on their site, not even for Vista for this device for this notebook.
Posted: 05-13-2009
View 1 Replies!
View Related
Adobe Reader 9 Compatibilities
I have just purchased a new computer with Windows 7 and I also downloaded Adobe Reader 9 to my computer. I have emails that come to me through my yahoo acct. that when I down load are in adobe software. When it opens up it opens in Microsoft Word and shows up encoded and unable to read. I use my friends computer set up with same system and it opens fine with no problem. Can someone please help me fix this issue. I need to get the emails for my college courses.
Posted: 12-26-2009 at 05:26:41 AM
View 3 Replies!
View Related
AuthenTec Fingerprint Reader
The latest drivers from AuthenTec have finally got this device working with W7. However, after returning the laptop to life after being in Power Saving mode, this device no longer functions. Is there still a driver issue or is there it a problem with power saving settings? The laptop is a Levono 3000 N200.
Posted: Wednesday, July 01, 2009 10:07 PM
View 2 Replies!
View Related
Sim Card Reader
I have "ideus Simply smart" card reader, have a sim card reader, the windows driver installer detect, I use Vista 64b drivers without problem, but the program don't connect. I wish to know if somebuddy have any idea.
Posted: Tuesday, May 19, 2009 5:28 PM
View 2 Replies!
View Related
Realtek 6 In 1 Card Reader
Since I installed Windows 7 64bit from Vista 32bit my card reader is not even recognized. More info: Realtek RTS5158 6 in 1 card reader Advent AIO-200 Anyone any workarounds on this issue? Hopefully with their final release problem will rectified, fingers crossed.
Posted: Â Â Â Â Â 09-21-2009
View 3 Replies!
View Related
All In One USB 2.0 Card Reader No Drivers?
im running an evga sli 58x, and windows 7 64bit 7077 i have the RC1 version of windows 7 but i hate to install that and as i have all my games and everything id have to reinstall with it(major pain) plus im not even sure if that would fix my problem anyways when i plug my card reader in i can't access it at all, it does show up in device manager but it says drivers not installed. I don't think they make this card reader anymore and there would be drivers floating around for a card reader, so what are my choices?
Posted: 06-18-2009
View 0 Replies!
View Related
RNDIS Drivers For Ebook Reader?
I have a linux based ebook reader that uses SSH for file transfer rather than USB. Under Windows XP I had to install a RNDIS driver and a program called WinSCP to transfer files to the reader. No problem. Now I have installed Windows 7 Ultimate and I can't even find any RNDIS drivers. Can anyone help? Direct me to a download for these drivers? Anything?
Posted: 11-04-2009
View 0 Replies!
View Related
Drivers Needed For Fingerprint Reader
So I installed Win 7 RC on my new laptop but the fingerprint reader) is not properly recognized with Windows 7 seeing it as a Generic Fingerprint Reader and installing the default driver. In Device Manager the Hardware IDs for the reader are: USBVID_1307&PID_1171&REV_0100 USBVID_1307&PID_1171
Posted: 06-30-2009
View 0 Replies!
View Related
USB All In 1 Mini Card Reader
I bought this Generic USB All in 1 Mini Card Reader off eBay (Some Cheap chinese thing) It worked fine on my previous setup, Windows Vista x64, and it still works on my fathers computer, Vista x64 I believe. But When I try to connect it to my current Windows 7 x64 install, it justs gives me an I/O device error, I think it might have something to do with the Device driver for Win 7 It might not be compatible, I don't know just thought somebody might have an idea if I can get it to work in Windows 7.
Posted: 4 Weeks Ago
View 1 Replies!
View Related
Drivers For EMachines Card Reader
before i gutted it out and put all new stuff in, my computer was once an eMachines C6415. it has a built in card reader that 7 identifies, but just as a generic card reader. there are windows xp drivers for it that will give them certain icons and specify what kind of slot they are, but i can't find any for 7. they work and all, but i want them to show up in my computer with all the correct information (instead of the generic icon that just says "removable drive"). i can't find any 7 drivers for it. any help?
Posted: 11-02-2009
View 2 Replies!
View Related
Error Message From Adobe Reader
I installed Win 7 RC1 on my Toshiba Satellite A135 as an upgrade to Vista Home Premium. I already had Adobe Reader 8 installed and it seems to work allright when I use it to open a file. When I log into my secure, online banking site using IE8, Adobe starts up also and displays this message: Cannot use Adobe Reader to view PDF in your web browser. Reader will now exit. Please exit your browser and try again. I have tried running the application compatibility tool and found no issues. The browser continues to work fine, so I'm not sure what would cause this to occur only when I log into this one particular site.
Posted: Sunday, July 19, 2009 2:01 AM
View 3 Replies!
View Related
Modem And USB Reader Problems
After installing I get just a bit to many Modems installed! 29 in fact! Good thing I don't use this modem. The below pic shows it all. Any suggestions on how to fix? I tried uninstalling it , but it just reinstalls all of them right back! http://i42.tinypic.com/9hqkok.jpg  The other question is I have USB readers in this PC "Came with it" They shows up in the Devise Manager but not under The "Computer" in the Menu! So I Have no access it them. How does one get them to show up under My Computer? http://i44.tinypic.com/oua846.jpg E-Machime W3609 CPU 3.33 GHz 120 GB HDD 1 GB Ram
Posted: Monday, January 26, 2009 1:49 AM
View 3 Replies!
View Related
RNDIS Drivers For Ebook Reader
I have a linux based ebook reader that uses SSH for file transfer rather than USB. Under Windows XP I had to install a RNDIS driver and a program called WinSCP to transfer files to the reader. No problem. Now I have installed Windows 7 Ultimate and I can't even find any RNDIS drivers. Can anyone help? Direct me to a download for these drivers? Anything?
Posted: Â Â Â Â Â 11-04-2009
View 2 Replies!
View Related
Ricoh SD/MMC Card Reader
on my laptop (ASUS Z91N), I've got one left driver issue: the integrated memory card reader. It's called Ricoh SD/MMC controller, the latest driver having the best behavior found is 2003-10-20 (1.4.2.9) from ASUS website for WinXP. All other drivers found does nothing, they install but when I plug the card, nothing appears in "My computer". The problem is that when I plug a SD card, windows detects it, assigns a letter, but I am unable to open to look at the files. I get "Access denied" every time. When I try to format, it does it with the good size detected! I tested by looking with another computer. So, this problem is weird, I never had any issue similar to that in the past. Anybody here having the same problem?
Posted: 05-10-2009
View 3 Replies!
View Related
Memory Card Reader Problems
Are there any known compatibility problems with memory card readers? While running Win 7 Beta, my SD card reader worked fine. Since installing RC, it does not. The system detects that a card is inserted into the slot and demands a format. After trying to format the device I get an error message that Windows was unable to perform the format (no, the card is not write protected). I've tried several SD cards (2 2-gig and a 4 gig) and none work, although they do work (without a format) in other devices, such as a digital camera. So either I have a hardware problem with the card reader (always possible, but it's only 6 months old) or there's a problem with Windows 7 RC reading and writing to the card. Device Manager says the device is there and working correctly.
Posted: Tuesday, July 07, 2009 4:55 PM
View 6 Replies!
View Related
Realtek Card Reader Not Recognized
I've got an Acer 5735z laptop with a Realtek card reader, it was working fine under vista. I loaded up Windows 7 on a fresh install and all was well. I noticed it had install a generic driver for the card reader, so i updated the driver with the correct version from Acer. This was couple weeks ago and everything seemed fine until today, when I noticed the laptop now doesnt recognise the card reader. It doesnt even show up as an unknown device in device manager, it like it doesnt exsit. Ive downloaded the recent drivers for vista/windows7 to no avail. I've also tried unstalling the Intel usb contollers and even going back to the original version of the drivers again to no avail... the only thing i can think of is reverting back to the generic drivers supplied with Windows7, but i dont know where there located on the disk or on microsoft.
Posted: Tuesday, November 17, 2009 10:41 PM
View 5 Replies!
View Related
Smart Card Reader Issues
This is the only major showstopper for me in using Seven 95% ActivIdentity USB Reader V2 ActiveClient 6.1 Both work fine in Vista 64 on the same box in dual boot. In Vista the driver used is the generic MS usbccid.sys driver version 6.0.6001.18000 dated 6/1/2006 In Seven there are 4 MS drivers all version 6.1.7000.0 dated 6/21/2006: - scfilter.sys - WUDFUsbccidDriver.dll - winusb.sys - WUDFRd.sys In Device Manager status I get the "This device Cannot Start. (code 10)" message. If I uninstall the device and plug it back in I can see that Windows sees an ActivCard USB reader V2 (shows up in "Other Devices" while drivers are trying to install) but the install fails for the Microsoft Usbccid smartcard Reader (WUDF). I have tried the latest drivers to no avail.
Posted: 01-31-2009
View 9 Replies!
View Related
Scanner And Card Reader Are Not Working
after installing Windows 7 I've installed a chip card reader (SCM Microsystem SPR 532) and a scanner (Canon Lide 9). Both were working fine for a few hours. But now none of them is working anymore. The Device Manager shows me that both devices are working properly but I neither can scan nor use the card reader for online banking. I tried to reinstall the drivers but this didn't help. Does anyone has a clue about this strange behavior?
Posted: Sunday, June 28, 2009 7:20 AM
View 2 Replies!
View Related
Memory Card Reader Issue
I have a Memory card reader and on the windows explorer it shows all the card slots as drives. Is it possible for it to only show the slot that has media in (dare I say, like a mac)? The same with my optical drives, is it possible to 'hide' them only showing when they have mounted a an item of optical media? Or is this just pipe dreams, and only the preserve of unix based systems?
Posted: 08-09-2009
View 4 Replies!
View Related
AuthenTec AES1610 Fingerprint Reader Keeps Disconnecting
I've experienced problems with the Authentec AES1610 fingerprint reader under Windows 7 RC. The device IS working using the default Windows 7 driver. However, it keeps disconnecting, triggering the Hardware disconnected chime. This occurs ever minute or so. I know for sure it is this device because if I remove it entirely OR if I install the Digital Persona software and attendant driver that are distributed online for my HP tablet (TX2510us), the chiming goes away. There is clearly something about the Windows 7 driver that is "losing grasp" of the device and letting it disconnect from the system over and over.
Posted: Tuesday, May 12, 2009 2:40 AM
View 8 Replies!
View Related
Dell 2407 Monitor Card Reader
Has anyone gotten a card reader built into a dell monitor to show up in Windows 7? I got any and all updates to Win 7 I could find. I installed the latest Vista chipset drivers for my motherboard, and also tried some drivers from Intel. The Memory card reader just does not show up at all. There is also a memory card reader built into the printer and it works fine. At one point there were Dell SM bus drivers available as an optional update. I tried installing them, but they failed. Now, just yesterday they no longer show up in Windows update.
Posted: Thursday, February 12, 2009 2:34 PM
View 9 Replies!
View Related
Acrobat Reader And Shockwave Flash Compatibility
i tried to install those aplications but i don't know what version is correct to windows 7 xp sp1, 2, 3? vista? win 95? i don't want to have problems after installing the wrong version. in the case of shockwave flash i had problems using mozilla firefox as my current navigator.
Posted: Monday, May 18, 2009 7:15 PM
View 2 Replies!
View Related
Dialogs Are Not Easily Read With A Screen Reader
I use JAWS to assist me with reading screens. A lot of the UI has text which is not easily read because it isn't a conventional dialogue. A good example of this would be the Windows Update section. The dialog displays a fair amount of information and the user can only do one of two things to read the text (as far as I can tell). 1. They can just read links and buttons using tab to select each item (and the tab order doesn't seem particularly logical). 2. They have to send the entire screen text to the JAWS virtual buffer (Control + Insert + W) and then step through it in text. This provides a lot of extraneous information like the search box and layout information. Does any other blind user out there have good tricks to make the UI more readable with JAWS? Microsoft - if you are listening - Windows XP is infinitely better for JAWS users. Some kind of dialog theme function where the user could go to "old" style windows UI would really help.
Posted: Sunday, May 24, 2009 6:09 PM
View 3 Replies!
View Related
Lenovo Fingerprint Reader Software X64
The software is installed and I can register my fingerprints but when I try to check the box: "Use fingerprint scan instead of password when logging into Windows" it checks and I can click OK. After that I go back into settings and it is not checked. It won't stay checked no matter what level is used in UAC either. It is like maybe it should prompt me to allow it to change but it never prompts so it doesn't change the settings. Windows 7 x64 Lenovo Fingerpring 3.2.0.275Jimmy
Posted: Monday, January 19, 2009 5:06 PM
View 4 Replies!
View Related
Sony Vaio Card Reader Problem
I have just upgraded to window 7 (64-bit) from Vista (32-bit) and now my sd/memory stick pro reader/writer will not work!!! Sony website does not support windows 7 drivers with my model laptop(sony vaio vgn-nr220e). The reader/writer is a Texas Instruments™ PCIxx12 Integrated FlashMedia Controller. CAN ANYONE HELP ME FIX THIS?
Posted: 12-05-2009
View 5 Replies!
View Related
Acer X1700 PC Card Reader Problem
Issue: It never seems to "stick". I installed the Realtek CardReader drivers, worked for a week and then I get "Unknown Device" in the Devices and Printers area. When it worked, it showed the Realtek drivers installed in the Control Panel - Device Manager window. Now when I look there. I see. 1. Standard Enhanced PCI to USB Host Controller 2. Standard OpenHCD USB Host Controller 3. !Unknown Device 4. USB Composite Device 5. USB Mass Storage Device 6. USB Printing Support 7. USB Root Hub 8. USB Root Hub Any Ideas? Windows 7 Build 7100 Acer x1700 PC Built in Card Reader
Posted: 07-29-2009
View 6 Replies!
View Related
Access Denied - SD/MMC Card Reader
I have a problem with my card reader. I have a S260(MS-1012) from MSI and it's integrated card reader (a Ricoh Bay1 Controller). It doesn't work well. Windows 7 install it and "Equipo" (i'm spanish, in english "Computer"?) recognize it. But when i try to open my sd card it says "Acess Denied". The same if i try to open it from command. PD: I try with different sd cards and mmc cards. I reinstalled the drivers from my drivers CD (from windows xp but work well in 7).
Posted: Sunday, May 17, 2009 2:23 PM
View 5 Replies!
View Related
Realtek USB 2.0 Card Reader X64 Issue
I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new Windows 7 build 7100, I've tried go to realtek driver web site, downloaded the Windows 7 driver version also got the win vista version. but nothing worked for me..
Posted: 07-23-2009
View 1 Replies!
View Related
15 In 1 Card Reader USB Device Stops Functioning
When I get to my computer after being away I get the message that a USB device has been stopped and this is what I found. This driver responded slower than expected to the resume request while servicing this device: Driver File Name : Driverusbuhci Driver Friendly Name : UHCI USB Miniport Driver Driver Version : 6.1.7100.0 (winmain_win7rc.090421-1700)
Posted: Friday, June 05, 2009 10:54 PM
View 2 Replies!
View Related
Shuttle Card Reader PC 23 (USB) - Error Code 10
I have tried several times to use my Shuttle Card Reader (PC23) that is connected to my mainbord on a free internal extended USB connector. Error message : Error Code 10 - can`t use device. If I insert a SD Card in the SD slot on the Card Reader, and use the hardware trobleschooting in Windows 7 RC : Win 7 can reconise the SD Card and I can use it, but only during the session. Next time i start the system I have the same error as before. For this 4 in one Card Reader there is no Driver for Win XP or Vista nesesary, so i think there normally no driver needed for Windows 7 RC either.Â
Posted: Thursday, August 13, 2009 7:50 PM
View 4 Replies!
View Related
Driver For UPEK Biometric Device Fingerprint Reader
I've got a Dell XPS M1330 notebook with integrated UPEK biometric fingerprint reader. The device itself is working fine, however the driver setup I've got at the moment isn't ideal. I can either use the driver provided by Windows Update, and this allows Windows to recognise the biometric device and I can use the Windows fingerprint logion functionality, but this is all. What I really want to do is use UPEKs' Protector Suite QL to enable the use of the biometric device to login to websites etc. If I use the driver provided by Windows Update, Protector Suite QL doesn't recognise the fingerprint reader installed. If I use the UPEK driver that allows the Protector Suite to work, Windows doesn't find any biometric devices installed - I can't find a suitable driver where both Windows AND Protector Suite QL recognise the biometric device. Has anyone a solution or a similar problem? I would like Windows to recognise the device to use the Windows biometric login, and Protector Suite QL to recognise he device to use the biometric website login. Alternatively I'd be happy not to use Protector Suite QL at all if there is a way to use the biometric device to login to websites native in Windows.
Posted: Saturday, January 16, 2010 11:42 PM
View 6 Replies!
View Related
Trouble Getting A USB IRDA Reader To Wok On Win 7
I have loaded windows 7 on a virtual machine (using VMware Fusion) on my Mac. One of the main reasons for doing this is to be able to use a PC based program that uploads data from my Polar sports watch. The up load can only be done via infrared. In the past I had no difficulty doing this on my PC with XP OS.
Posted: Monday, May 18, 2009 1:48 AM
View 6 Replies!
View Related
Broadcom USB Smart Card Reader Not Working
After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader). The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7. With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28). What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?
Posted: Tuesday, May 12, 2009 11:11 PM
View 11 Replies!
View Related
|
TRACKER
