I've got a windows partition set-up like below: 39MB (healthy EISA config) -> 14.65 GB Recovery (D) -> 43 GB (C) -> 1.95GB (no name) ->91.39GB unallocated, The partitions are set-up in that order. When I click on the 1.95 to extend it / add it to the 91.39GB, I get an error: the operation failed to complete because the disk management console view is not up to date. I've attempted to update it and restart the computer to no avail. how I can get my 43GB combined with the 1.95GB and 91.39GB partitions located to the right of it?
I got new laptop few days before. yesterday i was making 2 more partition. my C drive in which windows 7 has been installed had 500GB of space. so by using external application, i had decreased its size to 300GB. but from that time, some files has been corrupted. I cannot access that files now.. not even C drive.. I dont have recovery disc.
After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).
- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didnīt detect any drives (still donīt know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didnīt detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, iīm poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and canīt afford to get sick, a little problem called "living in Mexico"
My system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00... DRMK Version 8.00 COMMAND.COM Build 37 - Jul 28, 2008 DRMK KERNEL Build 15 - Aug 8, 2008 Copyright (c) 2006-2008 Dell Inc. All rights reserved. C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
I am awaiting delivery (tomorrow I think) of a new custom built PC. I have decided on a 180GB SSD and a 500GB second SATA 111 HD. I store all my data files on an external HD so only put the OS and programs onto the usual "C" drive. The Win 7 OS will be pre installed on the SSD and the only other software i would like to "enjoy" the speed of the SSD is a Video editing prog. A still photo editor and a VM prog so that I can install Win XP with a couple of very old small programs. I need other progs like MS Office 2003 but I only use them very occasionally and would prefer to install them onto the second hard drive. Does this look sensible as I am new to SSD's?
I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I(supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key)1. How do I tell if the USB key is bootable?2. What could have prevented my BIOS from remembering my new boot order?3. What might be the reason(s) why my laptop won't boot from the USB key?ïŋ―HP Pavilion dv5t-1000 CTO Entertainment Notebook PCSerial Number: CNF84816H3 Product Number: kq573av
My computer has started to make a bit of noise...it sounds like a faint hum, or constant drone, kind of like a fan noise. I checked the intake, exhaust and cpu fans by stopping them spinning and the noise is still there. It sounds like its coming from my PSU. Does that mean its on its way out? I have a Hiper 530watt PSU which I have had for about 4-5 years now.
I have to overwrite a windows 7 64 bit OEM with a windows 7 64 bit professional iso I got (yes I obtain it legally). I burned it onto a disc using a just a regular burning software that came with my computer(macbook pro), but you can't do that can you? You have to use a certain program that turns it into a bootable dvd, right? Am I correct or am I just taking nonsense.
Is it possible to make a specific folder in my Win7 installation public? I already have network sharing set-up between my Desktop and my Laptop on my network, but, at the moment, if I want to share something, I have to move it to the Public folder, use it, then delete it from there so that I don't have multiple copies of stuff floating around everywhere. However, I don't want to keep everything on my Window's drive, which means I can't simply move whatever I might be sharing to the Public folder to be used between my Laptop and my Desktop. I'm hoping there's a solution where I can simply share folders that I choose across the network. What I've Tried I've right-clicked on a folder and opened the properties, clicking on the "Sharing" tab. I then went to "Advanced Sharing" and checked off "Share this folder" with the Share name being the folder name, and the path was, by default, set to \ComputerNameFolder. This made it possible for me to see the folder on my Laptop (I shared one from my Desktop, essentially I'm trying to make my Laptop a satellite for my Desktop, which I'll explain at the end) but when I try opening the folder, my Laptop gets the following error message: "\ComputerNameFolder is not accessible. You might not have permission to use this network resource. Contact the administrator of this sever to find out if you have access permissions. Access is denied". Great. So I go back and click on "Share" in my folder properties, but the only users listed are the ones found on my computer, not over the network. So I click on the "I'm having trouble sharing" link, which brings up the help. The help mentions "Share with" on the right-click shell menu, so I try that and select Homegroup (Read/Write). Now I'm thinking I've finally done it, since I've now specifically specified that this is what I'm trying to do and granted that specific permission. Back on my Laptop I'm looking at \ComputerName and I see the folder there still, I try to open it and, voila, same error message. Now I'm stumped. Why Am I Doing This? I'm doing this mostly because my Desktop is the superior computer. It has better storage, etc... (as it should!) so it's the main computer. My Laptop runs Vista (important to mention!) and I like the fact that some of my programs run independently of the main computer, as it lets me do certain things on various websites simultaneously (nothing fishy mind you), which is great. However, for other things, I would like to just run my Laptop as if it was an extension of my Desktop. For instance, I record videos. I'd like to be able to record them on my Laptop if I so choose, but I want them to be recorded right on my Desktop, since it has the better storage. I also like to write, but I don't want multiple versions of stuff on various computers, though I do want the file on my computer somewhere, as opposed to being stored in the cloud. However, I like the freedom of being able to write wherever I might have my computer on the network, so, once again, I'd like to work directly off of the files from my Desktop. I play a text-based game in which I manage a lot of .txt files with stuff I use for the game, same deal as the writing, I might be playing the game on my Laptop instead of my Desktop and I might need to edit or add to those files, but I don't want to be trying to maintain two different folders of those files. I could go on and on, but I think you get the picture of what I'm looking for.
I need to flash some roms on a graphics card and a disk controller card, but both require the use of a 'boot floppy' (i'm adding that in quotes as this is totally alien to me!
I suppose this means some sort of ancient dos thing!
I've really tried against all odds to eliminate floppy and serial / PS2 devices from my life, and now I've achieved this, and my loft is far too dusty to be crawling around in trying to find such things again!
Could I create this dinosaur relic on a USB stick, and if so, how does one go about it?
I tried making my usb stick bootable as I did in the wonderful thread on this forum to install RC1 and it worked a dream, but i'm guessing this isn't the same thing is it .
The original Windows version that the laptop was shipped with was Vista it still has that sticker on it. The guy met us in a parking lot, that should have tipped me off to something, anyway I gave him the money, he gave me the laptop and I thought all was well. He said that he couldn't find the installation disks but would look. The next day when my wife turned on the computer it said that this copy was not legal. To make a long story shorter, the computer works fine other than every time you turn it on it reminds you of the illegal copy. So to make everything legal I purchased a 3 copy family pack of windows home premium. I installed it on my laptop that had Vista but was now wondering if it will let me install on my wife's with the illegal version.
I made a new account for my brother on my laptop but when we try to log in, it displays a "welcome" text and then after it is done loading it immediately logs out.What's wrong with my computer?
This problem occurred to me recently, as everytime i boot up my computer, the CPU fan makes a very loud noise and i can see the motherboard having a LED blinking orange. It's gone after a restart of the computer.
I have created a all-in-one install DVD of Windows 7 both US and Dutch. All sources are from MSDN and include SP1 of Windows 7.When I test the DVD of the US version everything is ok.When I test the Dutch version and start the installation of Enterprise it shows a release candidate EULA. When I boot the dutch enterprise ISO it show's the right EULA.
Now, I actually have the exact same OEM disk of Windows 7 Home Premium installed. I have a sister that seems to think she owns my laptop. I have considered splitting my HDD partition into 2 so that I can have my own installation and part of the drive. The problem is that if I screw something up, my sister will have a cow (it's the only place where she stores her iTunes, etc. and she's stubborn to use anything else, she wouldn't even accept it on backup). Can I also have 2 of the same OEM copies on each partition? If not, I'm Out of luck.
I am trying to get Windows 7 up-and-running on my Toshiba M200 tablet with an SSD.
The problem is that I do not have an external DVD and these machines don't allow booting from USB.
I've managed to get a fresh install onto the drive by installing it onto a partition of the old disk based drive and then copying this over using Norton Ghost. Unfortunately I cannot get this to boot, which I assume is a problem with the MBR.
I have a second machine running Windows 7, and If I mount the SSD using a USB caddy it all seems healthy and is marked as an active partition. Is there any way to get this drive booting without being able to load up the repair functions on the DVD?
If I use Win DVD Maker (WDVDM) to cut a DVD from an .AVI that is wider than 16:9 it plays with the image squashed to fit the 16:9 aspect.Should I use Win Live Move Maker (WLMM) or a third party program to crop the sides or pad the top & bottom of .AVI or other formats, and then WDVDM to cut a disc? Or is there are 'free' third party program that allows me to choose cropping and padding options for extra width .AVI and other formats and encode & burn to DVD in 16:9 or 4:3 ?
I know this is not very important in the grand scheme of things, but it irritates the crap out of me. When the player is in "Now Playing" mode, using the album art visualization, is it possible to make the album art bigger? When in full screen mode the album art is but a tiny postage stamp on the desktop. I would like to make it larger so it's easier to see. Is there a way to enlarge it, or did the programmers in Redmond not think there would ever be a need to actually be able to see and enjoy the album art?
I am having problems using RDC to connect to an HP laptop running Windows 7 Ultimate, 32 bit edition. The HP laptop is connected wirelessly to my home router. The second computer is an iMac (running same OS as HP) cabled to a switch, which is cabled to my home router router. A third computer, a Thinkpad running Windows 7 64 bit Pro (and cabled to the same switch as the iMac), behaves identically to the iMac, so I won't mention it further.I can always RDC from the HP into the iMac, but have problems RDCing from the iMac into the HP. I will get the error "Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote access to the server is not enabled 2)The remote computer is turned off 3)The remote computer is not available on the network"When this error appears, I am unable to ping the HP from the iMac. I am always able to ping the iMac from the HP.The HP is awake when in am trying to connect to it. In fact, both computers are set to never sleep or hibernate so I won't have to wake up a computer to RDC into it. Both computers are set up to allow incoming RDC connections. I have confirmed that the antivirus and Windows firewall settings on the HP and iMac are identical. I have even tried disabling both Windows firewalls, to no effect.Now here's where it gets strange. If I first RDC from the HP into the iMac and then disconnect, I can then ping the HP and RDC to it from the iMac. If I reboot the HP, the problem comes back.
I have a new computer with an i7 and 12GB system ram using Win 7 64 bit and had a question about how to utilize more than 3Gb system ram for games.How can I make a game in 64 bit o/s use more system ram say 8GB instead of 3GB for better performance? The game is Arma 2 Combined Operations.
I bought a computer that had Windows 7 on it, but didn't have an installation DVD. Well, I am unlucky or something, but twice over the years my Windows installation got corrupted or somesuch, now I would like to make a backup of it in case, without having to purchase a license of course. How would I do that? Do I have to download files? Insert a DVD and run a special program or something?
I got a new laptop and it's full of crappy software, I'm lazy so I don't want to take the time to uninstall it. So I just want to do a clean install of windows, but the laptop didn't come with a recovery disk
I was under the impression that "attrib +s folderName" would make a folder in Windows7 unsearchable. However, I just tried it and the contents are still showing up when searching the root directory (using the little search box in the upper right corner of the explorer window). Is there some other way to make a folder unsearchable?
I Have Intel i3 Processor and once i switched off my computer directly when it was on .... The next time i switched it on i found an Error that windows failed to start... There were two options i.e Start System Repair and Start Windows Normally..Then i did every thing that can repair my computer with system repair... But it did not worked...When i Start Windows Normally ... It Shows a Blue Screen....It Disappeared in a fraction of a second...Then i recorded a video and frame by frame saw the error screen... It Showed Windows Is shutting down for no damage to your computer...I Really dont care of mine computer bcoz its a i3.. and i thought of safe mode ... to take backup of my games ... then the next time i switched on my pc .. I saw that it was working fine.But at random times mine pc makes a sound .. .that is never got before ... i am sure that it is not any othere sound but the processors sound ... The Sound is like Audi Q3 When at full speed ...
I have a other internal hard drive, I wanna use to copy my windows image and make it bootable if someone happens to my main drive I already created window image Back Up & Restore > Create a system image > Put it on my internal hard drive Remove my main drive And it doesn't boot from the backup hard drive?
I downloaded the Win 7 Home Premium Upgrade ISO file from MS and am using MagicISO trying to make it bootable. Magic tells me the file is bootable ( and it will now open in the DVD tray) but the computer will not boot to it.I want to do a clean install, but feel as though I've hit the wall. For the time/money I've already spent I could have bought the full version at Walmart.
I recently got a virus (I got it professionally removed) that caused all my personal files (pictures, music, etc) to become hidden. I went into folder options to make it show hidden files. I can now go individually to each picture file and make it unhidden, but I have thousands of pictures. I tried going to the folder and doing "select all" to select all the pics in that folder, but when I go to properties the hidden box is grayed out. Is there anyway to make all hidden files unhidden without going through them one by one?
I'm helping a friend with her windows 7 emachine (64 bit) and when its all back in working order, I'd like to make her a set of recovery discs but I have a few questions before proceeding. I read that you only get the option of doing it once - so it better be right the first time.I've found instructions for making a repair disc, also instructions for creating recovery discs - would those be the same? The computer did not come with any os disc at all, so I'm wondering if making repair/recovery disc is possible without an os disc?
