Getting Error While Installing Windows 7
Feb 15, 2012
I am upgrading to Windows 7 on my laptop. When I inserted the disk it went through some of the installation then when it got to the Expanding Windows Files I got an error message. I looked it up and everything I read pointed to my dvd drive. I was told to bypass it you either by an external drive or use a usb thumdrive. I had an 8GB one laying around, followed all the steps on http://technet.microsoft.com/en-us [...] -usb-stick, it installed fairly fast, now I'm stuck on the Completing Installation part for about 30-45 minutes now, is this normal? From what I've read it works for alot of people if they remove all their USB devices however thats what I have Win 7 on. Would I still need it in my usb port? Or could I take it out since its on the completing installation step and everything is already copied over? I can post my comp specs here if that would help anyone. It's possible I'm just anxious and it could normally take this amount of time on a Laptop. It's somewhat new Dell Studio XPS with what i would say above average specs.
View 4 Replies
ADVERTISEMENT
Jan 17, 2009
I have on my computer XP pro installed on C:
Then I have a partion E: for the windos 7 beta 1 with 50 Gb
I started the computer with the WIndows 7 DVD and the win 7 start to install and extract the files and then restart and the follow error comes:
A disk read error occurred
Press CTRL+Alt+DEl to restart
But I can't do anything, the computer hangs
I must backup the xp, because the boot of xp was overwrite.
View 7 Replies
View Related
Feb 18, 2012
I burn Windows 7 ultimate image on DVD using roxio burn I used that DVD on my PC to boot that PC , PC took 5 minutes after saying" Press Any key to boot from dc/dvd" and the windows boot manager run and gave the options to run the windows 7 setup rather then starting automaically , and i selected that options to install., windows file started loading... But i want to install it on my laptop so when i boot it , after saying boot from cd/dvd , it takes 15min that says this error "UNEXPECTED I/O ERROR" do you still think there a problem in DVD or in my DVD writer
View 3 Replies
View Related
Nov 14, 2011
i've recently decided to reinstall win7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching Internet videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as wellso i thought that reinstalling windows might help as i havent done it in a long while. but i ecountered a problem while installing win7 64biti receive these errors (0x8007045d and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup.
i've done a clean install every single time and formated my hdd (seagate barracuda 7200.10 320gb) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). i'm really out of ideas now, i've tried switching ram's, switching dvd drives, disconnecting my gpu but nothing seems to... has my hdd died? or prehaps my mobo or cpu is acting upoh, and i burned my win7 iso's myself via imgburn - i've used the slowest possible burn speed (x2) and did it multiple times but every single dvd gave same error.
View 41 Replies
View Related
Sep 22, 2012
When I wanted to re-install W7 I wiped all disc partitions, and then tried to install windows 7 (64 bit ultimate), but gets the following error: Setup was unable to create a new system partition or locate and existing system partition. See the Setup log files for more information.
View 3 Replies
View Related
Jun 24, 2012
I know there are a couple threads on this, but I am having a lot more issues than others (or so i believe). Whenever I attempt to install iTunes, or any other programs, a window pops up telling about an error 2503, and then another window pops up telling me about an error 2502. Keep in mind, all the users on my computer have ownership of files (I'm pretty sure).
View 2 Replies
View Related
Sep 6, 2009
I recently downloaded the iso of Windows 7 64-bit Professional from my University's MSDN AA site. However when I boot up using the DVD it states an error in the Windows Boot Manager.
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc0000225
Info: An unexpected error has occured.
I have looked at other threads on this board and I have already tried toggling ACPI but there was no change. (It currently is set on and set to both S1&S3)
I have tried 3 different burns of the DVD a 16x using Nero 7 Express and 4x using Nero 7 Burning Rom, and lastly a 4x using ImgBurn and all of them turned out the same error.
I was formerly using Windows XP on my IDE drives listed on my hardware and I added the 1TB Sata to install windows 7 on, (however my IDE with XP Pro is still connected). I have also tried only having the Sata drive connected but it still amounts to the same error.
View 5 Replies
View Related
Jul 5, 2012
I made a horrible mistake by formatting local disk C while installing windows.[URL]...
View 9 Replies
View Related
Dec 27, 2011
I have a question regarding installation of Win 7 via USB stick.My mobo is an Asus P8Z68-V Pro Gen 3 now I can successfully start a Win 7 install but when it gets to the point where it needs to load the drivers for my hard drive it gives me an error telling me that a device driver is missing. I can only imagine it is the driver for my motherboards SATA controllers because when I run the install off a CD it detects my hard drives but when I do it from my USB 3 stick (on the front panel of my case) it tells me it can't find my hard drive. Does anyone know how to insert the correct drivers into my USB stick? Does anyone know what drivers I need?
View 5 Replies
View Related
Oct 20, 2011
i have a HP g61 with a 500 gig SATA drive when i try to install windows XP on it i get a windows stop messsage
Stop: 0x0000007b (0xf78d663c, 0x00000034, 0x00000000,0x00000000)
when googled it says something about the sata drive settings needing to be changed in the bios chang the setting for the sata operation from Raid auto/achi to raid auto ata but in the bios of the hp g61 there is no option for that, i verified this will work for the error because i just restored a dell vostro with a sata drive and it did work, now i just need to get this hp to work it has insydeH20 bios setup utility,
View 1 Replies
View Related
Apr 9, 2012
I am trying to install window 7 from a usb. It get to the loading windows files screen but right after that i get the 0xc0000001 error. Failed to load winload.exe.
Motherboard - ASUS A8AE-LE
Hard Drive - Wester Digital IDE
DDR PC3200
AMD Athlon 64 (939 chip)
I've tried 3 different Flash Drives, 5 different Hard Drive. Cant load from CD/DVD drive because when I boot the system with the CD/DVD drive installed i get the Blue screen of death.
View 9 Replies
View Related
Sep 3, 2012
I did download the iso that i got from Microsoft Moderator and it was Home premium 64 bit, did burn whith 2x whith imgburn and verify succefully then i did put it inside my pc and got that error on expanding fils 0%. Im using a Hp pavillion p6310sc . I had when i bought computer Home premium 64 bit but i tryed my friends 32 bit ultimate before but now i tried that too and gets same error. I got this issues while my computer did frezze and waited like 30 minutes then restarted pc and got something windows cannot boot so i did do the repair automatically for 12 hours and did not happend anything so did turn off pc, I tryed system recovery was on 0% for about 12 hours but when we did install 32 bit utlimate we did by mistake format the recovery harddisk so i dont have it on the hdd anymore. I have even formated the hdd whith diskpart clean all so its nothing on it but stills error and no install. Im writing this on a ipad and have not have my pc for 4 weeks so i pray and hope we can fix this pc because right now i have only economy for a hdd ans maybe cd rom but not a new computer. I have gotten a new error now when removing 2 gb of ram. Error code: 0x800703EE
View 1 Replies
View Related
Mar 4, 2010
When I go to create the new partition in Windows 7 that I want to install XP on it creates it as a logical drive. How do I create a primary partition instead?
View 8 Replies
View Related
May 2, 2011
Windows Recovery Error after installing H50 cooler.
View 7 Replies
View Related
Jul 18, 2012
I was following this http://blog.ryantadams.com/2008/02 [...] indows-pe/ guide and all was well. But after it found the DHCP server and said Press F12 for network boot service, I get this error.0xc0000001
View 1 Replies
View Related
Mar 26, 2010
error states could not access network location %APPDATA% during install, and hangs. Why?
View 3 Replies
View Related
Nov 9, 2012
when i am installing blutooth to my computer error 1935 is comming n installation is cancelled
View 1 Replies
View Related
Feb 18, 2013
Windows cannot install required files. Makesure all fiels required for installation are available and restart the machine
View 1 Replies
View Related
Dec 26, 2012
This has to do with a windows update that wouldn't install and keeps giving me an error code(800FO203). The update is for Realtek PCIe GBE Family Controller. No matter what I do it wouldn't install. (Disabled firewall, antivirus, contacted Realtek).
View 10 Replies
View Related
Aug 8, 2011
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before.
[code]...
View 1 Replies
View Related
Sep 25, 2011
I have bought a copy of Power Director 9 and when I try to install - it comes up saying to contact the system administrator - the error code is 1625. I tried cleaning the registry by buying Advanced System Optimizer. I feel the only option left is to wipe the computer entirely by doing a clean re-install of Windows 7. However, there are two versions that you can by, a full or an upgrade version? (I do not have any discs as this was already installed on machine). Which one should I need - or can this 1625 error be Fixed?
View 10 Replies
View Related
Feb 20, 2012
I had encountered problems with my laptop and wanted to start a fresh so I tried to install windows seven again and got all the way through the installation up until the completing installation phase then after about fourty minutesi received an error of what I beleive said windows has encountered a problem restart the computer and restart the installation and when i tried to boot I got an error after the setup is starting services screen that says the computer restarted unexpectedly or encountered an unexpected error windows installation cannot proceed, and when I restart I get stuck in this loop, I have my bios set to boot from cd drive but if I do not press any buttons it shows four different windows 7 listed, I am completely stuck in what to do, i have a dell Inspiron N5030. Im a bit of a computer noob so no jargon please, sorry if I have put this thread in the wrong part of the forum.Pretty much I'd like to know how to get rid of the 4 windows 7s and Make a fresh from my windows disk
View 2 Replies
View Related
Dec 16, 2012
I have a Gateway laptop M series that I upgraded to Windows 7 a few years back (o.g. Vista) has run beautifully ever sense. Recently installed Win8 fresh. Error code OxcOOOOOe9 became the issue. Start up repair was performed several times with no resolve. Used cmd to perform MBR fixes including fix mbr, bootrec.exc, and other fixes found on this site. Nothing seems to resolve the issue. I gave up and was about to call it quits, under the assumption the hdd was gone. One day I decided to throw a fresh copy of Ubuntu on it for laughs ( I am currently getting my certs in networking and linux+) it works flawlessly. Strange to me although I understand there is a difference with grub and mbr.
I should add that I am now just trying to reinstall 7. I have played with 8 on a different PC and would rather stick with the former.
View 3 Replies
View Related
Sep 7, 2012
I am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies
View Related
Apr 28, 2012
how to avoid 1935 error when installing autocad on Toshiba satellite L300 using win7
View 1 Replies
View Related
Jan 21, 2013
i was using win7 ultimate before and last day i tried to install a new win7 and in wich step that i had to choose a drive to install i sow this message "No drives were found. Click Load Driver to provide a mass storage driver for installation." but in the windows that i was using all of the drives was working.and i installed win vista and no messages like this i sow.
ram:4g
video: ati radeon hd 5450
cpu:intel pentium 4 cpu 3.00 ghz 3.01ghz
View 3 Replies
View Related
Nov 7, 2012
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
View 2 Replies
View Related
Nov 7, 2012
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
View 1 Replies
View Related
Aug 8, 2011
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before
View 9 Replies
View Related
Nov 14, 2011
i've recently decided to reinstall windows 7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching Internet videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as well. so i thought that reinstalling windows might work as i haven't done it in a long while. but i encountered a problem while installing windows 7 64bit, i receive these errors (0x8007045d and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup.
i've done a clean install every single time and formated my hdd (seagate barracuda 7200.10 320gb) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). i've tried switching ram's, switching dvd drives, disconnecting my gpu but nothing seems to work... has my hdd died? or perhaps my mobo or cpu is acting up? i burned my windows 7 iso's myself via imgburn - i've used the slowest possible burn speed (x2) and did it multiple times but every single dvd gave same error. also i've tried multiple iso's and downloaded them multiple times as well to confirm they didn't get corrupted while downloading.
my specs:
os: formatted hdd right now but previously i used windows 7 64bit
motherboard: intel bearlake g31 (i think, not sure... its such an old mobo)
cpu: intel core 2 duo 3.3ghz
gpu: geforce 9600gt - tried removing but didn't work
ram: ocz 2x2gb 800mhz ddr2 - tried switching to an exact same pair from another computer but it didn't work
hdd: seagate barracuda 7200.10 320gb
dvd-rom: not sure but i tried two different ones, both producing errors
View 4 Replies
View Related
Mar 29, 2012
Recently I dropped my Acer Aspire 1420-2039 notebook damaging the hard drive.I ordered a new WD Blue WD2500BEVT.Unfortunately the week before I dropped my computer, I installed the Windows 8 Consumer Preview.So I downloaded an .iso file of Windows 7 Home Premium 64 bit, (What was originally installed on the computer when purchased) and downloaded the Windows 7 USB/DVD Download tool to re-install the OS using a USB Flash Drive since my computer does not have an optical disk.hen I get to the install screen, Windows will not let me select the hard drive with error 0x80300001 "Windows is unable to install to the selected location."Usually other forums suggest selecting the proper drivers for the drive, however WD does not have drivers available for download saying it uses windows' default drivers
View 5 Replies
View Related
