Fujitsu Siemens AmiloA1650G Sound Drivers?
Nov 9, 2012I would like to get this driver for my PC
View 1 RepliesI would like to get this driver for my PC
View 1 RepliesI have a Fujitsu Siemens Scaleo P computer which I have just upgraded from XP to Windows 7, but for some reason my sound card does not seem to work, I have been onto the Fujitsu website but can't find any drivers for windows 7 to upgrade my sound card, I would be greatful for any suggestions as to how I might overcome this problem.
View 1 Replies View RelatedI need the Network Card driver for Scaleo T so i can at least connect through an Ethernet Cable. Any advice?
View 3 Replies View RelatedI want to get sound and video drivers for my laptop,its an amilo m1450g
View 2 Replies View Relatedi have installed Windows 7 on this machine to test and it works perfectly except for the sound, Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9 is the only thing wrong when i go into device manager driver upto date, and don't know if this is the problem but, have done some googling for additional drivers but to no avail and fujitsi have no solution, tried the vista solutions still no go. anyone who can point me in right direction which is probably staring me in the face.
View 7 Replies View RelatedMy laptop Fujitsu Siemens Amilo pro v3405 wireless connection always on after upgrading to Genine Windows 7..I ca not switch of from the wireless bottom nor by Fn F10..
View 3 Replies View RelatedI have a problem installing Ultimate on my laptop. When I get to the part of the install where I choose wich hard drive or partition to install it on, the installation doesn't detect any of my hard drives.
From what I've gathered from browsing different forums my problem lies in that I have to install drivers for the disc controller in order to detect the hard drives as I belive the drives are in a RAID-setup, but I can't seem to find the right ones.
From the information in the Controlpanel in Vista (wich I'm currently running) I've gathered that I have a:
* Intel(R) 82801HEM/HBM SATA AHCI Controller
AND
* Intel(R) ICH8M Ultra ATA storage Controllers - 2850
I've tried to load the drivers for these that I got from Fujitsu-Siemens, but I get the same problem. Could it be that these drivers are just for Vista? And in that case where do I find some for Windows 7? I've seen posts from people running Windows 7 on the same laptop so it should be possible to preform the install, but how?
I bought a Fujitsu P4, 2.66 GHZ, computer. Its memory capacity was 256 MB but i upgraded to 512 GB so that i could load Windows 7. I loaded Windows 7 and after the installation, there was no sound. I re-installed again but still there was no sound
View 3 Replies View Relatedaudio and video drivers
View 3 Replies View Relatedthe E hard disk drive has been deleted is there anyway of getting it back?
View 1 Replies View Relatedi am cambodia i no visa card.i have fujitsu( FMV-deskpower L50E )but i dont have Drivers . i canot Play it
View 1 Replies View RelatedFujitsu fmv biblo mg70l laptop drivers
View 1 Replies View Relatedi have a amilo fujitsu xi2428 laptop and my graphics card geforce 8600gs not working graphics drivers in windows 7 x64!!any help please?
View 0 Replies View Relatedas stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.I have a dell inspiron 531. The hardware ids from the device manager areHDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020EI have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.Does anybody know what might be causing this? I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
If anybody knows a fix for this I really would be eternally grateful
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.
I have a dell inspiron 531. The hardware ids from the device manager are
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E
I have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.
I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
I Have All Drivers Of Sound But Any Song And Video Cannot Contain Sound Why?
View 2 Replies View RelatedI installed a driver for my sound card, only to find out that sound just wouldn't play on my laptop. (It says that the sound is playing, it's just that it isn't coming through the speakers.) I know that the drivers are updated, so if you're going to ask if my driver is updated, the answer to that is yes. At first, I had thought that it was only a problem with the driver, or the hard drive, but that's not it... I don't know what the problem is. I've tried looking for solutions online, but absolutely nothing worked.I don't want to be stuck with the generic "High Definition Audio Device" which will just mute the speakers at the most random times.
View 1 Replies View RelatedComputers says thers audio and drivers are all correct and enabled tried reinstalling the drivers. but still. No sound?!
View 3 Replies View RelatedI am looking for a 64bit driver for this scanner. Fujitsu tech support has been way less than useless, telling me that they have no plans to do a 64bit driver. Does anybody else have this flatbed scanner? Is there a work around?
View 3 Replies View RelatedI know it's a Mac scanner, but I'm wondering if anyone ever made a Windows driver for the S510M.
Driver Download Link:
http://www.fujitsu.com/us/services/computing/peripherals/scanners/support/drivers-downloads_index.html
I will soon be buying a few new computers for the small business I work for. We are looking to get top-of-the-line computers that will last us another 10 years or so, so I'd like to go with Windows 7 64-bit Professional.
We were at first a bit concerned, though, that the main program we use, DataEase for DOS (yes, I know it's antiquated, lol) wouldn't work, but we've been told it should work fine through a Virtual PC emulated environment running WinXP.
What concerns us now, though, is whether or not we will be able to continue using our old Fujitsu DL4600 dot-matrix printers. We need these printers for printing on three-part paper to get signatures and such.
I'm quite sure there is no 64-bit driver available for these printers, but since we are going to be running XP through Virtual PC - will we be able to print to these printers through that emulated environment?
Installed Win 7 ultimate. updated to the latest intel 945 drivers. I have a problem with the graphics resolution.
I have set the screen resolution to SXGA 1400 × 1050. However, when I flip the screen to tablet mode or when I login after suspend, the screen flickers (goes black for a second) and the resolution switches to 1024x768. I have looked in many places for a solution. Problem still persists.
is my PC 64 bit compatible, at the moment i have a Fujitsu Esprimo E5905 PC running widows XP home edition
View 9 Replies View RelatedIs there any way I can force 1920 * 1200 (or 1080) resolution, using this hardware: Fujitsu Scaleo L22-1W display and GeForce 9600M GT GPU. Native resolution for this display is 1680 * 1050 at 59 Hz.
I am building a HTPC system using a spare HP Pavilion dv7 laptop, basically the same specs than those I've listed in my system specs. I would like to use it with two displays, the mentioned L22-1W and and a full HD plasma TV from laptops HDMI out, desktop duplicated not extended, laptops own display disconnected because this GPU allows max two displays at the same time.
Problem is this duplicated desktop. This GPU allows a FullHD resolution ONLY when a HDMI device is the only display connected, or when multi display settings are on extended desktop. If I choose duplicate desktop, it allows the HDMI device resolutions only up to the max of that second display, in this case 1680*1050.
If this is not possible, I'll buy a new display with FullHD resolution. I just want first to test if I could make this system from spares I already have.
I've recently acquired a relatively old, yet (wonder)fully functional, Fujitsu P7010D laptop.It's a 1.10GHz Pentium M, with 1 GB of RAM. I'm no expert in computers so let me know if there's something else that is necessary to mention. Basically it's a 7 year old laptop (since 2005), but it runs just fine.A lovely piece of gear. I was trying to install a Home Basic edition of Windows 7 on it with no success.Again and again I encountered a problem that only popped at the end of the installation, upon running Windows for the first time. I got a blue screen during "Starting Windows" (its animation never started by the way, FWIW), saying ( A problem occurred ... If this problem persists ... ) The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS. Technical Information:*** STOP x000000A5 (0x00000011, 0x00000003, 0x00000000, 0x00000000) Well obviously it's about my BIOS, so I downloaded what probably is the latest update from Fujitsu, which seems to be from 2007 (that's the date in the BIOS Info tab). After going through another Windows 7 installation, the same blue screen appeared again, sadly. The original Windows XP Professional edition does work completely fine, so is another "Windows Seven Royal XP SP3" that I downloaded from the internet. I only get the error when trying to install Win 7. Another thing to mention is, I could load Windows 7 on safe mode (hitting F8 during boot up), everything was functional there when I was messing with settings and USB / SD (Secure Digital) devices. No blue screen at that time. Tried to put it all simply and accurate, I'd love to get some help with thatI use it in my studies and there's nothing I want more than a comfy workspace on the go everyday and during lectures.
View 4 Replies View Relatedactually i have two problems
i have Siemens Fujitsu v6505 Laptop
i have installed Windows 7 Build 700 and it worked fine ,
-My first problem is that i cant find my camera
i want to take pictures but i cant find it .
-My second problem is when i put the pc to sleep the display doesnt comeback and a black screen is displayed
and the lights goes on though, so i press on the shutdown button long to shutdwon
and when i press again on the same button to turn it on, the lights goes on , but still the display not working,
and i have to shutdwon it again and unplug the power cable and turn it on , and plug the power cable again.
a friend of mine has a new Fujitsu Amilo LI3910 laptop. the only problem he has with it, is that his mic is very very low. i can hardly hear him when he is using it. as he told me, he has an internal and external microphones. the internal one shows 3 bars of volume and he can't make it any higher. the external one is full but the volume is still very low. He changed OS from Windows Vista to Windows 7 Professional. He thinks that it's somehow connected to his audio drive. However, we do not know what kind of audio card he has, since all it says on the manufacturers site is "Up to 7.1 high-definition audio via S/PDIF"
View 4 Replies View RelatedAnyone have any luck with a Fujitsu Scansnap S510 under Windows 7 RC 64 bit? I have the Vista 64 bit drivers which worked just fine under Vista, but I can't get the Scan Manager package to install at all under Windows 7 RC 64.
View 9 Replies View RelatedFujitsu M1450G is losing its internet connection after a few minutes of internet browsing, the wireless connection says it is still connected, but internet doesnt work. I also do a repair on the connection but it doesn't solve the problem. I have to restart the laptop each time to have internet again, and it will only last a few minutes usually. What can the problem be and how can I solve it?PS Laptop location doesn't seem to be the issue, tried it just a metre away from the router and it has the same problem. Other laptops in the house have no problem at all.
View 9 Replies View Relatedwifi connection required what to do ?
View 1 Replies View Relatedmy lifebook 532 my touch pad pointer is very sensitive, specifically highlighting unwanted items on a web page and actioning commands when hovered over for a short time.
View 2 Replies View Related