i have been using win 7 since the time it was out in beta stages.it's a wonderful os no doubt about that.but since 2-3 months i have been experiencing a strange problem regarding flash components on some specific sites or rather some specific pages on the sites.
the problem appears only on e-sites like :
amazon
paypal
ebay
these are 3 i use.
if i browse ebay and amazon its perfectly fine..no issues..the minute i click on account/login/my account..everything becomes abnormal.
pages takes eternity to load up
all the pictures /tabs/animations disappear
all and all its like flash just suddenly stopped working
paypal does not open up. the site loads in 2 minutes with the problems i face when i click on account on the other 2 sites.
and yes i have reinstalled flash again and again..starting from a 4 month old flash to the newest one.standalone installer.
p.s- the adobe site dlm also doesn't do anything. it just loads and never downloads anything and then firefox/ie8 stops responding for 2-3 minutes.
i installed shockwave / all flash beta versions from standalone installers..the problem remains...
i have no problem in flash otherwise - Internet/yahoo all works like charm.
i got an ok 1mbps(quiet fast in my part of the world) connection and a quiet fast 1700$ computer. so hardware and net connection is not an issue.
what i think its the security of win 7 + eset nod32 causing some problems because only the e sites are getting affected.
Not sure if this belongs here, but tried to search and cant find anything in this forum in relation to the error I get when installing (trying to), Flash Media Live Encoder v3.
I was doing some programming for school and then the IDE stopped working and so did Windows, itself, but I had to get somewhere, so i forced myself to pull my 1 GB usb drive out without safely removing it. Still it was acting weird, so I just shut it down. Now I put the usb back in, and apparently I have to format it. I don't want to because I didn't back up recent work but eventually I had to choose to format it.
Initially when I went to format it, the format size was still at "0.98 GB" but now, it changed to "8 MB" even if I try to format it at 8 MB. Quick format provides a "Windows was unable to complete the format". Normal format provides a similar error. Diskmgmt formatting provides a similar error.
I never had a problem like this before (even when pulling out drives at time when it failed to respond) but I would still like to utilize the usb. Is there a way that i can retrieve the 1 GB back?
My flash drive on windows 7. Says a program is using it. I've tried to see what programs but I don't see anything. Does this happen often or is it just my computer or usb port?
i am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
While shooting a wedding, my 5Dmark II showed an error and locked up. I turned off the camera and turned it back on. I took one more picture and it locked up again. I turned it off and replaced the card, with no further issues. When I tried to download pictures in error card, nothing showed on the computer. The computer is asking me to formatt the card again. I have never had any problems with the Lexar Plat II 80x cards before. What can I do to recover my photo?
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 3839 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB; Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabled
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
in 7 doesn't see any USB flash drives. Check in disk management - not showing up there either.AND........If I switch HDDs & revert to XP - same thing. No usb flash drives appear. And in control panel > disk management they do not appear as unassigned also.
I had a virus and am told I'm now clean - but I have two External hard drives that have all my stuff on them - that I don't want to lose (grimace). I downloaded the flash detector - but I can't get it to run - is it because it does not work on windows seven? If it does not is there something else I can maybe use?
I Can't find a flash player that works. everywhere I look it won't work. They say that it installs but when I go to a site that needs flash it doesn't work.
i've noticed that i can't get a flash player for my 64 bit ie so i've been using the 32 bit version, but i've got a problem.
playing some videos is fine... Internet and all of those are great.
my problem is when i go to a place like stickam or ustream or something like that ie closes on me when the site tries to access my camera and mic. that is annoying, but not too much of a problem.
my other problem is that i can't watch some embedded videos, even the ones i put into my own website from my own account on viddler. it just closes, restores the 'tab' and i go from there.
has anyone had this problem before? if so how did you fix it? i already tried the old 'uninstall and reinstall flash' bit and so far i've stuck out.
I'm using the latest FF release and when prompted to upgrade my Flash player, I do so. Sometimes it works, sometimes it doesn't and either way, a few days later I am prompted to upgrade again.
Don't know is this is a 7 issue or a FF issue or a Flash issue, but its getting tiring. Anyone else have this?
I bought a 500W PSU for my computer. It was too big for my apparently shorter than standard case, but when I was building my computer I flicked the red switch on the back (the europe to US voltage one) with it switched on (but the system wasn't functioning). There was a big green flash and a slight pinging noise.Just wondering, is that PSU totally done for?
i want to install Windows 7 to vhd, so i need to start install at boot , how can i install Windows 7 from hard disk?? i dont have a dvd and no flash above 2gb.
Having issues, with some flash applications, i.e. facebook: bejeweled, and amazon.com music preview. I dont know, if amazon music preview is flash based, but I don't want to try and look at the moment, because it would then force me to restart my computer to regain a network connection, because I lose internet connectivity, at that time.
I've installed the official windows 7 64bit realtek drivers from gigabyte, but still continues.
today Internet and other sites claim to require a new adobe flash plugin be downloaded, but even after going through the directions and running it and being told i am running flash whatever version and even restarting for good measure i come back and get the same flag that i need to instal this same plugin.
I have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
ive finished building my pc and i need to put the os on. But i have the os in a file because i dont have the disk, and i need to set it up on the flash to let my new pc boot up.
