Fix Detecting Array And Windows 7 Restart On Boot
Feb 6, 2013
About 2 weeks ago my computer started experiencing some technical difficulties when the video card went out. The screen began to be cut up by 3 discolored bars running vertically spread out across the screen. Realizing this was a video card issue i went out and bought a new Nvidia Geforce 640 and replacing the old obsolete one. While looking for instructions online on how to properly install the new driver, i came across one that said to use this driver sweep program to wipe the driver from the system then restart and install the new software. upon using the program however i might have cleared another driver accidentally in the process. it was abbreviated ATG or something along those lines. When i finally physically installed the driver upon restart the video problems were all fixed and the graphics were back to normal. However,after bios i get a quick detecting arrays error that flashes for a fraction of a second ( i had to record it and pause it off my iphone to read the array error) and the computer automatically reboots upon getting to the windows 7 logo.
View 2 Replies
ADVERTISEMENT
Mar 15, 2012
I've got 2 2TB hdd running in a raid0 volume setup with Intel RST. I made a flash disk for the raid drivers. Then I go ahead and start the install of Windows 7, load the raid drivers, create a 1TB partition to install Windows 7 on and have a 3TB partition for storage and such. Installs windows no problem. When i restart the system windows boot manager appears with "0xc0000225 - The boot selection failed because the device is inaccessible"If i then restart the computer, i get windows error recovery screen, if i choose Start windows normally, it boots fine. If i choose repair, it just goes back to the 0xc0000225 screen. This happens every time i restart the computer.I've tried everything i can think of, such as changing the boot order in the bios and such.
View 1 Replies
View Related
Jul 8, 2011
I have a 6TB raid array consisting of 2 3TB drives. I have the latest Motherboard with EFI bios. The Intel RST utility allowed me to set up this array, and it says it is bootable. I would like this to be my C: drive.
How can I get Windows 7 to install and boot from this array.
View 21 Replies
View Related
May 31, 2011
Running Windows 7 Ultimate x64. I have setup a partition which I transfered from on drive to another and now my boot partition is on an SSD Raid array connected to an LSI 9260 controller. If I boot the computer with the RAID Array first, the computer will just hang there. No message no nothing after the Verify DMI success message. If I setup my computer to boot from CD first and the the RAID Array second and with a bootable CD in the drive, the BIOS will display the "Press any key to boot from CD" If I don't touch anything, then windows will load just fine when the boot sequence switches to the RAID Array.
View 3 Replies
View Related
Apr 6, 2011
I've just had a new mother board installed in my tower, now it's a Pent 4 3.4g. I used to have my two external HDD's connected to the old system configuration but now at startup, when it gets to Auto-Detecting External HDD's it takes for ever to do anything. I have to unplug them, then do a reboot and all is fine, but then have to plug them back in again.
I know from reading some post's that it's in the BIOS startup sequence but I'm not quite sure where and what to change in the startup.
In the BIOS Boot Device Priority I have: 1st - Floppy Drive, 2nd - [3M-ST3200800AS], 3rd - [ATAPI CD-ROM], 4th - [Disabbled].
View 1 Replies
View Related
Jun 7, 2010
I just installed Windows 7 Starter side by side with Windows 7 Ultimate 32-bit (it doesn't matter why) and on 7 Starter it is not detecting any wireless networks. The 7 Ultimate detects networks (and is connected to one) but the 7 Starter does not. The computer is a Gateway LT2104u Netbook.
View 4 Replies
View Related
Jul 29, 2011
After downloading WIPZIP UTILITIES SUITE my computer (Windows 7 Home Premium) will not boot up again after I click on the "restart" icon. The computer remains turned on but there is no activity from the hard drive and the monitor shows "no signal". I have to manually shut down the computer and then start it in the normal way before it boots up again.
View 1 Replies
View Related
Oct 12, 2011
So, upon receiving a new Asus G53SW-XN1 laptop, I promptly put in a smallish SSD to serve as a Windows/common apps drive, moving the HDD to the other hard drive slot.
Fresh install of Windows 7, etc. At the moment, Windows will not boot up - no splash screen, no opportunity for Safe Mode, etc. But Windows is perfectly happy to run - if I boot off a CD, then hit 'Restart', everything starts up fine. The Repair Windows Installation option on the CD sees the Windows installation okay, and when asked to repair says 'no problems are found', and happily reboots. Some sort of MBR/partition issue that the Repair doesn't detect?
View 4 Replies
View Related
Jun 17, 2011
i have two HP computers (DC7600c and DC7700c). I did a fresh install of Win 7 ultimate and when i click to restart computer from Win, PC wont start windows. But if i do cold start or chose shut down from Win then boots normal.
View 2 Replies
View Related
Jun 11, 2011
I would like to get 2 SSDs and put them into a raid array using Windows 7-64bit, but wanted to make sure I understand how to do that. The 2 SSDs will be the only drives in the system. My computer has an X58 motherboard with an ICH10R. Here is what I think is the correct procedure: Boot into the bios. Set the storage config to RAID (the other choices are IDE and AHCI) Reboot and hit Cntrl-I to get into raid menu during boot. Set up the raid array in the setup screen. Reboot to the Windows 7 install CD and install Windows Is this correct? Are there any other steps I need or tips I should be aware of?
View 9 Replies
View Related
Dec 24, 2012
In a new build I'm trying to create a RAID 1 array with two 1TB drives. The drive mode is set to RAID on the Motherboard, and I was able to successfully create the RAID within the Intel Rapid Storage BIOS. Once booted into windows, in the Intel Rapid Storage Technology Window it says recognizes that the RAID is there and says the status is normal. It has been initialized through this program also (although i have read that there is no need to initialize for a RAID 1). In Disk Manager I can see my SSD that windows boots from, and 1 WD 1TB drive (There is 2 there though, but this makes me think that it sees that its a RAID) and it shows it as unallocated space. In "My Computer" the only drive i can see is my SSD. So i guess my question is what do i need to do to make Windows see the RAID in "My Computer"? This is my first RAID build so im new the the RAIDing world.
System Specs:
Gigabyte GA-Z77X-UD3H
Intel 335 (OS Boot Drive)
2X WD Caviar Black 1TB HDD (For RAID)
View 1 Replies
View Related
Jan 9, 2012
I have been having this problem for the past 2 months now where my computer would not start after complete shutdown, but if i start the computer press F8 and boot in safe mode it boots ok and if i restart it, the computer starts back fine. I have tried diagnostic tests on my hardware (HDD, RAM, CPU, MB) and all have passed. Neither has there been any voltage fluctuations or any type of physical damage to my computer hardware
View 3 Replies
View Related
Apr 27, 2011
Last year sometime, my install and all that went flawless, I put Windows 7 64 bit pro on a fresh drive, let it format and install as it wanted, zero problems. Boot drive was alone in the PC, its a WD black 320, I dont have the model or part number in front of me, but it seems to be a solid drive. The PC is a built clone, using Asus mobo and AMD dual core, spec's are in my profile if anyone needs to look that up, basically I don't see any of that mattering in my problem but there you go.added a promise RAID card last night, using an existing array from a previous build, and the system worked great and booted great once. I thought I was home free, but rebooted just to check since I have so little faith in PC's until they work twice, and sure enough I get hung at the glowing windows screen if this card is installed.I have read all I can here on this, and have been thru much troubleshooting... BIOS is fine, boot drive reads fine... the card and its fast track utility see the array fine... all those drives recognize just fine... the problem as I think today is, with the new array in place, windows can't figure out where to boot.
The old array was bootable years ago, so there is probably an MBR on it? I'm guessing a little at this point, but I used to boot to that array but went away from that years ago... since then, and I think I was on win2k back then, but adding an fresh hdd then, and since moving to XP, nothing ever cared... forward to today, Windows 7 does not like this array being in the mix, thus it hangs at the glowing window screen (the starting windows splash where the happy color balls form the win logo)remember, this was all up and running once, so that should eliminate a bunch of trial and error on bad drives, bios issues, and driver stuff... i have been thru the ringer with promise, and they swear the driver is good and is WQHL certified and all that... pulling the RAID card out lets me boot normally, so the hang up is definitely with the presence of this array the catch?? while my boot was C: to begin with, before i ever put the raid in, I put in another solo hdd... i backed up all my pictures to it.. and just before doing all this, noticed that while my C drive and E drive were all legit letter wise, looking in the disk manager, the E drive was listed as disk 0, and the C drive was disk 1... this wasn't a problem at that point, but makes me wonder why on earth the boot drive isn't device 0.
View 8 Replies
View Related
Sep 24, 2012
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
View 7 Replies
View Related
Nov 28, 2011
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are:
Motherboard: gigabyte 970a d-3
Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2)
CPU: AMD phenom ii x6 1100t black edition 3 .3ghz
GPU: Sapphire hd 6870 1GHZ
PSU:700watt
OS: Windows 7 Ultimate x64
View 18 Replies
View Related
Aug 29, 2012
Running Win7 64 bit, built this computer back in December, has worked flawlessly until now. Last few days - operates fine for an hour or so, then freezes, goes black, crashes and reboots itself, only to stop at the loading OS screen due to 'Boot Disk Failure' Happens regardless of what I am doing, or even if idle. Have updated windows, ran virus and malware scans.
GIGABYTE GA-Z68XP-UD4 LGA 1155 (it was slightly bent on the end with the USB connectors and headphone jacks, but installed fine)
GIGABYTE GV-R697OC-2GD Radeon HD 6970
Antec EarthWatts Series EA-750 Green 750W
Intel Core i5-2500K Sandy Bridge 3.3GHz
64 GB SSD
8 gigs Ram
All Critical errors are event 41, Kernal Power - but I'm sure thats from me hardbooting on the disk failure.
View 20 Replies
View Related
Nov 1, 2012
I have a HP labtop and my laptop froze all of a sudden so I did a hard restart of the computer. After restarting the computer I am no longer able to boot my computer up, the screen will go black sometimes after the log in screen. But now I do not even get the option to go to the log in screen now it just goes to the startup recovery stage. Everytime I try to fix start up I get startup repair off line following by the details of 0.00000 or something like that. The numbers are all zeros in the details but I tried other options like restoring to a previous point and I keep getting errors.
View 5 Replies
View Related
Feb 13, 2012
I was contemplating using a Raid 0 array as my primary C: drive with OS. I understand all the issues with that and do regular daily backups. I used to use Acronis which had no trouble with a raid array. But on this new build I was wondering if the built in backup tools would be able to image and more importantly restore my data to the array. My back up drive is not part of the array. I would guess that it would see it just fine from the OS and have no trouble creating the backup image, I am more concerned that if I had to use the rescue disk and reload the image whether or not the array would be visible to the restore disk.
View 8 Replies
View Related
Sep 10, 2012
I have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
View 9 Replies
View Related
Jun 19, 2012
Built a "super computer" with all the bells and whistles, did raid0 array OK installed Windows 7 ultimate on ssd 120GB drive.went to drive management found raid array, partitionnedit as 1 18TB drive without problem BUT when i tried to format it (quick since i suspect it may take days) and iwin sais failled to format drive.i will try to make a Loooong format and see what happens.
View 2 Replies
View Related
Dec 9, 2012
I've had issues with my PC booting up for a while now but usually after a few restarts it would work right. A few days ago it stopped booting. It would get through the system startup but would stop at a black screen when it should be loading the OS. I reinstalled the OS and it worked on initial startup. But once the PC was restarted the problem came back. I tried changing out the hard drive but the same thing happened. I then used a friends computer to download an ISO of windows 8 developer trial. It installed fine but upon restart did the same thing. Although windows 8 said something about not being able to find some windows start file. I'd rather not spend money buying things if they are not necessary.
View 24 Replies
View Related
Mar 28, 2012
Some weeks ago my desktop (Windows 7 Home Premium 32bit) started crashing sometimes, mostly when I put it into suspend mode. It could generally be restarted by powering up again, sometimes a couple of times. I didn't do anything unusual at the time such as major new hardware or programs.Now the problem is systematic and I can't really boot anymore in normal mode. Windows 7 hangs on the screen with the four-colored animated window early in the process.I've tried: * The auto-repair option when booting. This reports an error for which no solution is known:
StartupRepairOffline
1 6.1.7600.16385
2 same number
3 unknown
[code]...
* The repair tools on my Windows 7 installation disc. Again no joy.
* Re-installing Windows 7. I did this as an "upgrade", not as a completely fresh install, as I couldn't face re-installing programs and getting user data off and on. The re-install itself did seem to finish. But every time the computer had to be restarted it would freeze. I then turned it off and on manually, and it continued as expected.
* sfc /scannow
* Memory test
* Booting with a protocol file (F8, ntbtlog.txt).
* Fixing the master boot record.
I've not tried restoring to my only system image (9 months old), as I thought this cannot be better than re-installing Windows 7 while keeping the programs and user data ("upgrade"). I did make a Windows Easy Transfer copy of the user files one time when I managed to boot for some reason, so I'm not violently opposed to trying this if there's a good reason.I can start in safe mode. I think the attached protocol file shows two boots: First a regular one which fails, and then a safe mode which doesn't load a lot of stuff but which succeeds. In the first, regular boot there are a couple of drivers that don't load.
View 5 Replies
View Related
Sep 6, 2012
i just save my project and then after a few minutes i got BSOD i read "ntfs.sys" then i restart my computer and then my system won't boot, displaying in monitor is no cable connceted, but when i check it's ok.
View 9 Replies
View Related
Jul 6, 2011
Let me explain, I just noticed that when I restart my pc, the restart precess seems to hang at the motherboard screen for more then 3 times the time it does when I boot the pc from being switched off(a good 15-20 seconds at Mobo screen on restart).
The problem is I think it only started doing this after I accidentally uninstalled a hard drive driver and the pc shut down(and I think restarted). The hard drive seems fine now, the driver was reinstalled, I'm just a little concerned I could have caused a problem, or is this normal?
So the question is simple, Is it normal for a pc to take longer(at least 3 times) at the motherboard screen when you restart then when you boot up from an off position. If the answer is no then I suspect it could be something I've done to it, as I never noticed it taking that long before.
My basic pc spec is:
i5 2500
assus h67
8gb ram
560ti
I just checked, when I start up the pc normally it stays on motherboard screen for 6 seconds, when I restart it stays on the screen for 24 seconds.
View 2 Replies
View Related
Apr 11, 2012
I run 7 Home Premium, 64bit on a Toshiba Satellite L505. My chipset is from the Mobile Intel(R) 4 Series family. When I try to play 1080p or even 720p videos (doesn't matter if it's VLC or MPC, or whatever) my screen blacks for a second and then comes back with the 'display driver stopped responding and has recovered' message. Then the VLC window is green, and I can't play the video.
I've uninstalled and re-installed the Intel drivers from the Toshiba website many, many times, and nothing has worked to solve this problem. I already clean boot, so there aren't any conflicting programs that cause this. HOWEVER, I have noticed that if I start up my computer, then restart from the start menu, I am able to play the videos without a hitch. Then, if I completely shut down and turn it on again, the issue re-surfaces.
View 5 Replies
View Related
Mar 22, 2009
I have a problem with my Soundmax array mic on windows 7, the volume is very low and when I use mic boost the sound is of very poor quality with annoying static. Does anyone know some good drivers for this sound card that will work on windows 7 64bit?
I have no problems whatsoever with audio playback, just the microphone has problems.
L.E. After fiddling with lots and lots of drivers, I found a modified version with the new Soundmax panel, problem is although the microphone works as expected in the sound card software, in windows and other apps it still has the same problems.
M.L.E. Made it using the v6.10.02.6520 driver wich you have to mod to make it work on some ADI sound cards, more details about modding in the 3-rd post of this topic:
http://www.nforcershq.com/forum/1-vt71280.html?postdays=0&postorder=asc&&start=0
I couldn't make head or tail of it so I just installed them over a modded version of the 6480 drivers.
View 1 Replies
View Related
May 9, 2012
So i have windows 7 installed on one 120g ssd and i want to take the OS and put it on a raid 0 array using two of the same 120g ssds. Whats the best way i can acconplish this?note, the ssd the os is already on will be one of the ssds used in the array
View 3 Replies
View Related
Sep 27, 2012
how can i get past the 2 tb limitation on win 7 so that i can run a 0 raid array?
View 2 Replies
View Related
Sep 17, 2010
i am a newbie as far as computer hardware is concerned. after struggling for days to install windows 7 onto my new pc which came without and 0s installed,[code] it list the 465 which i use for storage but the 30gb where the 0s is installed dosent show. surely if the hard drive had a problem the 465gb wouldnt show as it an te 30gb makes up te 500gb? i tried selecting the 465gb volume enter and then exiting diskpart then it says BOOT MGR IS MISSING PRESS CTRL +ALT+DEL TO RESTART..so basiclly i have read almost all forums concerning this and followed most of the steps listed above for however mine says boot manager missing or corrupt, wen ever i run start up repair its says start up repair cannot repair this computer automatically.
View 9 Replies
View Related
Dec 17, 2012
I just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing ..
Press cltr+altr+del to restart...
Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
View 2 Replies
View Related
Apr 5, 2012
I fell asleep with my PC on and woke up with it stuck in sleep mode. I performed a hard shut down via holding down the power button for several seconds. Now the pc will not post and my monitor claims no signal. No beeps from the Mobo speaker. I've replaced my cmos battery so far.Mobo is an asus m3a79-t Deluxe and I've heard some issues of bios not supporting sleep modes?
View 9 Replies
View Related
