Some weeks ago my desktop (Windows 7 Home Premium 32bit) started crashing sometimes, mostly when I put it into suspend mode. It could generally be restarted by powering up again, sometimes a couple of times. I didn't do anything unusual at the time such as major new hardware or programs.Now the problem is systematic and I can't really boot anymore in normal mode. Windows 7 hangs on the screen with the four-colored animated window early in the process.I've tried: * The auto-repair option when booting. This reports an error for which no solution is known:
StartupRepairOffline
1 6.1.7600.16385
2 same number
3 unknown
[code]...
* The repair tools on my Windows 7 installation disc. Again no joy.
* Re-installing Windows 7. I did this as an "upgrade", not as a completely fresh install, as I couldn't face re-installing programs and getting user data off and on. The re-install itself did seem to finish. But every time the computer had to be restarted it would freeze. I then turned it off and on manually, and it continued as expected.
* sfc /scannow
* Memory test
* Booting with a protocol file (F8, ntbtlog.txt).
* Fixing the master boot record.
I've not tried restoring to my only system image (9 months old), as I thought this cannot be better than re-installing Windows 7 while keeping the programs and user data ("upgrade"). I did make a Windows Easy Transfer copy of the user files one time when I managed to boot for some reason, so I'm not violently opposed to trying this if there's a good reason.I can start in safe mode. I think the attached protocol file shows two boots: First a regular one which fails, and then a safe mode which doesn't load a lot of stuff but which succeeds. In the first, regular boot there are a couple of drivers that don't load.
I have good installation disk because I have use it a lot before and recently.I am trying to install Windows 7 x64 on my sistem partition, (recently wiped and formatted) but everytime setup finishes with the first part of the installation it automatically restarts but it gets stuck when the "press any key to boot from dvd" message e tridappears, (If I don't press any key).If I press any key it wil start the installation over again.I tried ejecting the cd and boot from the harddrive but the screen will remain black with blinking cursor.
So, I've been having a bunch of problems with BSODs lately and I've been struggling to find the cause because even after disabling automatic restart in the system properties, the damn thing still restarts. All I get is the Windows Error Reporting service starting up when the computer reboots and telling me my computer just Blue Screened. I'm pretty sure I could figure out what it is (I already know it's not RAM, because I ran memtest on it for 13 hours with no results) if I just could get at that error code on the blue screen, but that's hard to do when you never even see it.
Sometimes my PC automatic restart. I never click restart button. Why is that? How do I overcome this matter? When windows starting it show "Windows is not shutdown correctly. Start normal screen. *Windows never show "Error message" in this process.
am facing some problem while using my laptap...it is getting switched off and starting automatically after continuous usage of one or 2 hours around....
About a week ago I started having to sign into sites that were "remember me" before.Why is this? Happened right after the last big update (17 total). Annoying to have to continually enter name and password all the time.
I am wondering is there a way to have an automatic boot process run?Example: I work and get home at around 5:30-6:00 PM, I would like my PC to boot at 5:00 PM.If there is a way to do it great, if there isnt, no great loss.
when i turn on my pc have along time to start windows and when i press F8 to start windows normally it's not do anythingmy boot drive is on "HARD DISK" no on"boot from CD "
I currently have XP and 7 dual booted, but I want 7 to boot automatically when my computer starts up. On the other hand, I don't want to delete my Windows XP partition yet. XP is on the Active and default C: drive, and 7 is on my secondary partition E:
i just restored to a disk image i recently backed up. When it was done i tried to boot my system and it automatically booted to the dell diagnostics. why is that? i can't seem to find a way to boot to my system.
I have a rather strange issue. Yesterday I had to restart my machine due to Mozilla Thunderbird and Windows updates, however, when the box rebooted, my monitors displayed "No Signal". After a little troubleshooting and finding an old VGA cord, I figured out to hook it up to the on-board video card (the HDMI wouldn't work on it).Now for some reason the card isn't detected and when I use the disk to try and re-install the drivers, I just get a "No Drivers" message at the main menu. So it looks like my graphics card just went out. But wait! I also noticed (after much frustration) that when I tried to Hibernate the box, it didn't work. Now I have Hibernate set to my front power button, however, when I also try to do it from the start menu, Hibernate and Sleep are grayed out. Please help!!!To recap: After restart and Thunderbird/Windows updates, graphics card won't work along with losing the capability to sleep and hibernate the box.
I have installed McAfee on my computer (I know, its the worst antivirus ever, but I have a year's subscription left and I need to use it for that year being). After installation, my browser (win 8 IE9) would not work. It would say something like "Waiting for Yahoo.ca" and perpetually be like that. A quick restart would often fix the problem but more than not the next time I open the browser would not work again. I have yet to try this issue on other browsers.
i have two HP computers (DC7600c and DC7700c). I did a fresh install of Win 7 ultimate and when i click to restart computer from Win, PC wont start windows. But if i do cold start or chose shut down from Win then boots normal.
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
I've had issues with my PC booting up for a while now but usually after a few restarts it would work right. A few days ago it stopped booting. It would get through the system startup but would stop at a black screen when it should be loading the OS. I reinstalled the OS and it worked on initial startup. But once the PC was restarted the problem came back. I tried changing out the hard drive but the same thing happened. I then used a friends computer to download an ISO of windows 8 developer trial. It installed fine but upon restart did the same thing. Although windows 8 said something about not being able to find some windows start file. I'd rather not spend money buying things if they are not necessary.
After downloading WIPZIP UTILITIES SUITE my computer (Windows 7 Home Premium) will not boot up again after I click on the "restart" icon. The computer remains turned on but there is no activity from the hard drive and the monitor shows "no signal". I have to manually shut down the computer and then start it in the normal way before it boots up again.
i just save my project and then after a few minutes i got BSOD i read "ntfs.sys" then i restart my computer and then my system won't boot, displaying in monitor is no cable connceted, but when i check it's ok.
Let me explain, I just noticed that when I restart my pc, the restart precess seems to hang at the motherboard screen for more then 3 times the time it does when I boot the pc from being switched off(a good 15-20 seconds at Mobo screen on restart).
The problem is I think it only started doing this after I accidentally uninstalled a hard drive driver and the pc shut down(and I think restarted). The hard drive seems fine now, the driver was reinstalled, I'm just a little concerned I could have caused a problem, or is this normal?
So the question is simple, Is it normal for a pc to take longer(at least 3 times) at the motherboard screen when you restart then when you boot up from an off position. If the answer is no then I suspect it could be something I've done to it, as I never noticed it taking that long before.
My basic pc spec is:
i5 2500 assus h67 8gb ram 560ti
I just checked, when I start up the pc normally it stays on motherboard screen for 6 seconds, when I restart it stays on the screen for 24 seconds.
I run 7 Home Premium, 64bit on a Toshiba Satellite L505. My chipset is from the Mobile Intel(R) 4 Series family. When I try to play 1080p or even 720p videos (doesn't matter if it's VLC or MPC, or whatever) my screen blacks for a second and then comes back with the 'display driver stopped responding and has recovered' message. Then the VLC window is green, and I can't play the video.
I've uninstalled and re-installed the Intel drivers from the Toshiba website many, many times, and nothing has worked to solve this problem. I already clean boot, so there aren't any conflicting programs that cause this. HOWEVER, I have noticed that if I start up my computer, then restart from the start menu, I am able to play the videos without a hitch. Then, if I completely shut down and turn it on again, the issue re-surfaces.
So, upon receiving a new Asus G53SW-XN1 laptop, I promptly put in a smallish SSD to serve as a Windows/common apps drive, moving the HDD to the other hard drive slot.
Fresh install of Windows 7, etc. At the moment, Windows will not boot up - no splash screen, no opportunity for Safe Mode, etc. But Windows is perfectly happy to run - if I boot off a CD, then hit 'Restart', everything starts up fine. The Repair Windows Installation option on the CD sees the Windows installation okay, and when asked to repair says 'no problems are found', and happily reboots. Some sort of MBR/partition issue that the Repair doesn't detect?
About 2 weeks ago my computer started experiencing some technical difficulties when the video card went out. The screen began to be cut up by 3 discolored bars running vertically spread out across the screen. Realizing this was a video card issue i went out and bought a new Nvidia Geforce 640 and replacing the old obsolete one. While looking for instructions online on how to properly install the new driver, i came across one that said to use this driver sweep program to wipe the driver from the system then restart and install the new software. upon using the program however i might have cleared another driver accidentally in the process. it was abbreviated ATG or something along those lines. When i finally physically installed the driver upon restart the video problems were all fixed and the graphics were back to normal. However,after bios i get a quick detecting arrays error that flashes for a fraction of a second ( i had to record it and pause it off my iphone to read the array error) and the computer automatically reboots upon getting to the windows 7 logo.
I have been having this problem for the past 2 months now where my computer would not start after complete shutdown, but if i start the computer press F8 and boot in safe mode it boots ok and if i restart it, the computer starts back fine. I have tried diagnostic tests on my hardware (HDD, RAM, CPU, MB) and all have passed. Neither has there been any voltage fluctuations or any type of physical damage to my computer hardware
i am a newbie as far as computer hardware is concerned. after struggling for days to install windows 7 onto my new pc which came without and 0s installed,[code] it list the 465 which i use for storage but the 30gb where the 0s is installed dosent show. surely if the hard drive had a problem the 465gb wouldnt show as it an te 30gb makes up te 500gb? i tried selecting the 465gb volume enter and then exiting diskpart then it says BOOT MGR IS MISSING PRESS CTRL +ALT+DEL TO RESTART..so basiclly i have read almost all forums concerning this and followed most of the steps listed above for however mine says boot manager missing or corrupt, wen ever i run start up repair its says start up repair cannot repair this computer automatically.
I just installed a new window 7 ultimate os to my 32 bit system and I doing something with my disk management. I actually delete the 21mb unallocate space in my disk management. After that I do some my work and browse the internet and shutdown the system but when I again starting my computer. It will nor work only a message appear on screen ...
Boot manager is missing .. Press cltr+altr+del to restart... Again and again only this message ...
I try to go boot manager by pressing f2 ,f12,f8 it it doesn't work, only pressing delete button it shows some options. It try to install a new os but it is not reading my cd/dvd or usb. When it check options it shown a massage that they are disable. Some stuff to enable my usb, dvd port or any way to start my system....
I fell asleep with my PC on and woke up with it stuck in sleep mode. I performed a hard shut down via holding down the power button for several seconds. Now the pc will not post and my monitor claims no signal. No beeps from the Mobo speaker. I've replaced my cmos battery so far.Mobo is an asus m3a79-t Deluxe and I've heard some issues of bios not supporting sleep modes?
I plugged in a new hard drive planning to upgrade by cloning, then suddenly my computer restarts and it continuously cycles... I disabled the restart on automatic failure to see the bsod and it says: [code] I don't have the windows recovery disk.I can remove the hard drive and plug it into my laptop but I have no idea what to do from there..
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are: Motherboard: gigabyte 970a d-3 Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2) CPU: AMD phenom ii x6 1100t black edition 3 .3ghz GPU: Sapphire hd 6870 1GHZ PSU:700watt OS: Windows 7 Ultimate x64
Running Win7 64 bit, built this computer back in December, has worked flawlessly until now. Last few days - operates fine for an hour or so, then freezes, goes black, crashes and reboots itself, only to stop at the loading OS screen due to 'Boot Disk Failure' Happens regardless of what I am doing, or even if idle. Have updated windows, ran virus and malware scans.
GIGABYTE GA-Z68XP-UD4 LGA 1155 (it was slightly bent on the end with the USB connectors and headphone jacks, but installed fine) GIGABYTE GV-R697OC-2GD Radeon HD 6970 Antec EarthWatts Series EA-750 Green 750W Intel Core i5-2500K Sandy Bridge 3.3GHz 64 GB SSD 8 gigs Ram
All Critical errors are event 41, Kernal Power - but I'm sure thats from me hardbooting on the disk failure.
