Error At "Setup Is Staring Services"
Jun 27, 2012
I have build a new system and nearly installed win 7, the problem is that after the installation is nearly done and the pc restarts it shows an error at "setup is starting services" with "The computer restarted unexpectedly or encountered an unexpected error.Windows cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the application." I have tried restarting the pc with the install disk and trying to repair - did nothingtried to start in safe mode - cannot complete install in safe mode?
View 2 Replies
ADVERTISEMENT
May 10, 2011
i installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume
View 1 Replies
View Related
Oct 11, 2011
I have read many threads but they all contain ability to access start-up screen and I do not. I also do not get the pop up box to install windows 7. I literally only get "resuming windows" for 2 seconds, then straight to setup is starting services screen. I cannot pull up task manager or anything else. It is my nieces computer and I have no idea what she has been doing with it so I have no additional information for you. It is an Acer brand with windows 7, which is why I posted in this forum.
View 7 Replies
View Related
Feb 15, 2013
how can i unlock the acer setup starting services will not go past this screen and can't get anything else to appear
View 2 Replies
View Related
Mar 12, 2012
my toshiba laptop is stuck at setup is starting services
View 3 Replies
View Related
Jul 27, 2010
this is what i have done so far. got a win 7 dell pc, a vostro 400 to be precise. installed all apps and settings that we need on our desktops. then i used sysprep to run the OOBE and generalize switch, then booted into windows PE to capture an image .wim file of the entire isntallation. this .wim file is then saved onto a 16gb usb memory stick becuase its quite large, then using imagex i apply the image to the same pc same hardware etc and it completes with no errors. then the next time i restart i should be at the OOBE with the language settings etc etc but its just stuck on this dam "setup is starting services" rubbish!!! anyone had this problem or done any win 7 imaging yet? floppy drive is disabled, no usb devices plugged in apart from a keyboard. so im lost now.
View 5 Replies
View Related
Aug 3, 2012
I recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.
I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.
View 8 Replies
View Related
May 30, 2011
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
View 4 Replies
View Related
Jun 30, 2011
So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
View 9 Replies
View Related
Jul 19, 2012
Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies
View Related
Sep 10, 2012
My computer is stuck on the mess that says : Setup is starting servies. wont do anything.I can shut it down but wen i turn it back on its on the screen again.
View 4 Replies
View Related
Sep 30, 2011
I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
View 1 Replies
View Related
Feb 8, 2012
My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
View 4 Replies
View Related
Jan 20, 2013
"On the same error screen press SHIFT+F10 and it will open up a black Window. (a command prompt window) 2) In the black windows type the word "regedit"(without the inverted commas and hit enter. That will open the registry editor. In the Registry Editor.. Browse to.... HKLocal machine/SYSTEM/SETUP/STATUS/ChildCompletion, and after highliting childcompletion,on the right hand side check for setup.exe. if the value is 1 change it to 3.(by double clicking on setup.exe and changing the value shown in the box). Then close the registry editor and then also close the black window. Then click on OK for the error and the computer will restart and the installation may complete. just try it and let me know if it worked."
I tried the above and rebooted, I still get the dreaded "Setup is starting services" loop
View 1 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Feb 10, 2013
It just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?
View 2 Replies
View Related
Jul 6, 2011
For some reason, it goes all the way through the install, or so I think, then I discover that it's rolling back the changes. It reboots and I notice a new option on the boot menu for rolling back Setup, which is the default one. So now the computer keeps booting that option and restarting as soon as the roll back screen has been show for a few seconds.o I decide to choose the Windows 7 option instead, figuring I will try to reinstall again. Instead I get a screen saying Setup is installing services, and an error message saying "The computer restarted unexpectedly or encountered an unexpected error."So I've been reading tons of pages online and tried everything like disabling the floppy disk in the BIOS, running Windows in Safe Mode and then through a command prompt disabling some devices, and trying to upgrade from the DVD only to find out I can only do a clean install there.
Making a clean install is absolutely NOT an option. So since the installation saved all the old files, I overwrote the install files with the old files, but I'm still getting that screen. So I'm figuring that there is somewhere in the registry database, where I can tell it not to load install but instead boot directly into Windows. But where would I find that?
View 3 Replies
View Related
Jun 23, 2012
This is a new HP laptop DM4 2180. I started it then decided to run Sysprep Generalize.Now I get Windows 7 is looping from "Setup is starting services" to "Setup will continue after restarting your computer" to starting windows.
At this point is stops at "setup is starting services" for the past 3 hours.
View 1 Replies
View Related
Sep 23, 2012
My Acer Aspire One started acting funny a few months ago (Replacing wallpaper with a black screen, shutting down randomly). One day, it shut down and a window popped up for a scan of sort. After a long and frustrating process, I decided to restore the OS. Now, whenever I boot it up, it gets stuck on a black screen that reads "Setup is Starting Services", after which a window ops up saying "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 3 Replies
View Related
Jan 4, 2013
I am trying to install a certain software while the installation it say that it trying to stop services but after a while it say that an error was during the stopping services process and it complaining about privilege issues. The pc that i am trying to install is mine so i think i am loged as administrator and also i tried to run the setup file as admin and same error.
View 1 Replies
View Related
Feb 13, 2009
I ran the System diagnostic and it seems I have a service that is "abnormally terminating service" It lists it as "UNKOWN" . I checked Services in Administrative Tools and see no errors that I know of anyway. Has anyone else encounter this? I have attached a snapshot of my system diagnostic results..
View 4 Replies
View Related
May 10, 2012
I'm trying to use MMC at home using Windows 7 to connect to services.msc on the office computer to no avail.
User with full admin/owner rights on the Home computer
User with full admin/owner rights on the Office computer
Computer name for home computer is Home-computer
Computer name for office computer is Office-computer
Home computer is running on Windows 7 Ultimate SP1
Office computer is running on Windows XP Pro SP3
Home computer is using a router and is a part of the WORKGROUP Workgroup
Office computer is using a router and switch and is a part of the WORKGROUP Workgroup
I can ping the external (isp) ip address of the Home computer using the Office computer
I can ping the external (isp) ip address of the Office computer using the Home computer
IP address of home computer has the same parameters (?) as the office computer
Added Home computer user name by inputting the object name xxx.xxx.xx.xxxComputerNameto the Office computer asks for password; inputted user with full admin rights username and password indicates that the object was not found Added Home computer user name by inputting the object name xxx.xxx.xx.xxxUsername to the Office computer; asks for password; inputted user with full admin rights username and password and indicates that the object was not found Home and Office ISP supplied IP addresses are static.All computers at work and at home have static ip addresses Both home and office routers have dhcp assigned Office router has port 1723 for PPTP forwarded Office router has port 500 for IPSEC forwarded Tried forwarding port 50-51 for IPSEC as well Tried forwarding port 135 just because I found it on the web. It did not work.Port forwarded all of the above ports. Failed.Using IP Address as the Domain Tried using a computer name as a Domain too and failed On the Office side, I get this a dialogue box that asks for a username and password:After I input the correct user name and password I get this:Tried the Domainuser, the user@Domain as well as \ip-address. For both sides when I click on Check Names I get a WORKGROUPIP ADDRESS which simply results in an Error 5 Access Denied when I click on services.msc A dialogue box appears on the Home side which has the same result as the Office side:All the pictures are from imageshack so you have to open link the images.
View 1 Replies
View Related
Dec 24, 2011
how to remove unchecked services completely (DELETING) from the services tab in msconfig? Like Google update service and so on.
View 9 Replies
View Related
Feb 3, 2012
I'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
View 7 Replies
View Related
Feb 10, 2013
I had a nasty virus a while ago (I think I managed to get it all cleaned out) but it played hell with my updates, and recently I think I discovered why.[URL]In other words, I receive an error whenever I try to use Updates and BITS is not present in my services list.
View 14 Replies
View Related
Jul 12, 2011
i downloaded a trial progran and deleted it, then i had problems with windows, booted eventually after 6 minutes but no internet and i get this error message, windows cannot connect to systen event services,log in as admin and check what services fail to load, but it wont even do that. my system restore has also been disabled etc. i tried a repair but no joy, so i tried an upgrade but, because the installed version on the PC is newer than the CD version it wont do the upgrade. i am trying to avoid a clean install. how can i get past the "you have a newer version of windows" and do the upgrade,
View 1 Replies
View Related
Oct 28, 2011
When I downloaded the game I could run the setup and it worked but I had to install the game in 64 bit.So i deleted the installed part and returned to downlaoded to try again but this time.
View 1 Replies
View Related
May 19, 2009
When I run the windows 7 disk at the boot up and the menu pops up i try to choose clean install but i get an error that says "Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation. Error code: 0xE0000100"
View 6 Replies
View Related
Nov 1, 2010
I'm redoing a customer's machine and right after selecting the partition to install on I get a 0x80070057 error. I have reloaded bios defaults, low leveled the drive and am only trying to use a single large partition.
specs are
gigabyte ga-g31m-es2l mb
4 gb gskill ram
500 gb WD hdd
View 2 Replies
View Related
Dec 3, 2009
After entering the 8 digit code on my Windows 7 Ultimate PC in the extender setup, I get the "Configuration Error" "An error was encountered while configuring your computer for use with this Extender.".
Happens every time the same way. Each failed attempted causes two event log entries below. Interestingly, immediately after the failed attempt - the "Media Center Extender Service" service gets disabled. It is running under the "Local Service" account. I can set it to "automatic start", and then re-start the service, but as soon as I go through the Extender Setup, and it fails, the service is disabled again, with the two event log entries..
View 4 Replies
View Related
Dec 12, 2011
when i switch on my pc A window comes and shows f1 to resume .why is my pc showing that
View 1 Replies
View Related
